Page 2 - Product description; Intended use
Contents Introduction..................................................................... 2Safety..............................................................................5Operation...................................................................... 11Maintenance.................................
Page 3 - Overview
Overview 7 13 1 3 4 5 6 12 14 9 2 8 10 15 16 23 24 25 17 18 19 14 21 20 11 22 1. Blade and blade guard2. Transport guard3. Handle for tilt adjustment4. Cutting deck with tilt adjustment5. Lock for tilt adjustment6. Hand guard7. Front handle8. Harness support hook9. Power trigger10. Power trigger loc...
Page 5 - Product damage; Safety; Safety definitions; Work area safety
Double insulation. Product damage We are not responsible for damages to our product if: • the product is incorrectly repaired.• the product is repaired with parts that are not from the manufacturer or not approved by the manufacturer. • the product has an accessory that is not from the manufacturer ...
Page 8 - Personal protective equipment
immediately if anyone approaches. Never swing the product around without first checking behind you to make sure that no one is within the safety zone. • Ensure that people, animals or other things can not affect your control of the product or that they do not come in contact with the cutting attachm...
Page 9 - Safety devices on the product
time of a day. Continual and regular users should have their hearing checked regularly. WARNING: Hearing protectors limit the ability to hear sounds and warning signals. • Use approved eye protection. If you use a visor, you must also use approved protective goggles. Approved protective goggles must...
Page 11 - Safety instructions for maintenance; Operation; Introduction
• Do not use other battery chargers than the one supplied for your product. Only use QC chargers when you charge BLi replacement batteries. • Do not try to disassemble the battery charger.• Do not use a defective or damaged battery charger.• Do not lift the battery charger by the power cord. To disc...
Page 13 - To stop the product
4. Hold the product near your body for a stable work position. 5. Make sure that the tip of the cutting equipment does not touch the ground. 6. Be careful and work slowly until all the branches are correctly cut. To adjust the angle of the product The cutting deck can be adjusted in 8 different posi...
Page 14 - Maintenance
3. Push the release buttons on the battery and pull the battery out. Maintenance Introduction WARNING: Read and understand the safety chapter before you do maintenance work on the product. WARNING: Remove the battery before you do maintenance on the product. Maintenance schedule WARNING: Remove the ...
Page 16 - Troubleshooting; Keypad
Troubleshooting Keypad Problem Possible faults Possible solution Green start LED flashes. Low battery voltage. Charge the battery. Red error LED flash- es. Overload. The cutting attachment is blocked. stop the product. Remove the battery. Clean the cut- ting attachment from unwanted materials. Loose...
Page 17 - Transportation, storage and disposal; Transportation and storage; Technical data
Transportation, storage and disposal Transportation and storage • The supplied Li-ion batteries obey the Dangerous Goods Legislation requirements. • Obey the special requirement on package and labels for commercial transportation, including by third parties and forwarding agents. • Speak to a person...
Page 18 - Approved batteries
520iHE3 Blade speed cuts/min not in the SavE mode 4000 Water protection level IPX4 1 Yes Noise emissions 2 Sound power level, measured dB(A) 94 Sound power level, guaranteed L WA dB(A) 96 Sound levels Sound pressure level at the operator's ear, measured according to EN 62841-1 and EN62841-4-2, dB(A)...
Page 19 - Declaration of Conformity; EU Declaration of Conformity
Declaration of Conformity EU Declaration of Conformity We, Husqvarna AB, SE-561 82 Huskvarna, SWEDEN, tel: +46-36-146500, declare on our sole responsibility that the product: Description Battery-operated extended reach Hedge Trimmer Brand Husqvarna Type/Model 520iHE3 Identification Serial numbers da...
Page 20 - UK Declaration of Conformity
UK Declaration of Conformity We, Husqvarna AB, SE-561 82 Huskvarna, SWEDEN, tel: +46-36-146500, declare on our sole responsibility that the product: Description Battery-operated extended reach Hedge Trimmer Brand Husqvarna Type/Model 520iHE3 Identification Serial numbers dating from 2023 and onwards...