Husqvarna 128LDX - Manuals

Husqvarna 128LDX – Manual in PDF format online.

Manuals:

Manual

Manual Husqvarna 128LDX

Summary

Page 2 - SYMBOL EXPLANATION; Symbols

English --- 2 545196777 Rev. 2 4/30/09 SYMBOL EXPLANATION Only intended for trimmer heads. Noise emission to theenvironment according to theEuropean Community’sDirective. The machine’semission is specified in theTechnical data section andon label. Sound pressure level at7,5 metres Use unleaded or qu...

Page 3 - CONTENTS; Contents

English --- 3 545196777 Rev. 2 4/30/09 CONTENTS Contents KEY TO SYMBOLSSymbols 2 . . . . . . . . . . . . . . . . . . . . . . . . . CONTENTSContents 3 . . . . . . . . . . . . . . . . . . . . . . . . Note the following before starting 3 . . . . WHAT IS WHAT?What is what? 4 . . . . . . . . . . . . . . ...

Page 4 - Know your trimmer

English --- 4 545196777 Rev. 2 4/30/09 WHAT IS WHAT? 1. Trimmer head 12. Starter handle 2. Grease filler cap 13. Fuel tank 3. Bevel gear 14. Choke control 4. Cutting attachment guard 15. Primer bulb 5. Upper shaft 16. Air filter cover 6. Lower shaft 17. Handle adjustment 7. Loop handle 18. Drive dis...

Page 5 - GENERAL SAFETY PRECAUTIONS; Personal protective equipment; Never allow children

English --- 5 545196777 Rev. 2 4/30/09 GENERAL SAFETY PRECAUTIONS IMPORTANT! Whenever you use a clear-ing saw, brushcutter or trimmer you mustwear personal protective equipment that isapproved by the authorities. Personalprotective equipment does not eliminatethe risk of accidents, but it can reduce...

Page 6 - Stop switch; Machine’s safety equipment; Never use a machine

English --- 6 545196777 Rev. 2 4/30/09 GENERAL SAFETY PRECAUTIONS Press the throttle lock-- out and make sure itreturns to its original position when you re-lease it. Check that the throttle control and throttlelock-- out move freely and that the returnsprings work properly. See instructions under t...

Page 7 - Overexposure to; Muffler; Never use a cutting; Mufflers fitted with

English --- 7 545196777 Rev. 2 4/30/09 GENERAL SAFETY PRECAUTIONS WARNING: Overexposure to vibration can lead to circulatorydamage or nerve damage in peoplewho have impaired circulation.Contact your doctor if you experi-ence symptoms of overexposure tovibration. Such symptoms includenumbness, loss o...

Page 8 - Cutting equipment; Trimmer head

English --- 8 545196777 Rev. 2 4/30/09 GENERAL SAFETY PRECAUTIONS Cutting equipment This section describes how to choose andmaintain your cutting equipment in order to: S Obtain maximum cutting performance. S Extend the life of cutting equipment. Trimmer head S Only use the recommended cutting at-ta...

Page 9 - ASSEMBLY; Fitting the loop handle

English --- 9 545196777 Rev. 2 4/30/09 ASSEMBLY S Push the attachment into the coupling untilthe attachment snaps into place. S Before using the unit, tighten the knob se-curely. NOTE: Make sure unit is assembled cor- rectly as shown in this manual. Fitting the loop handle S Clip the loop handle ont...

Page 10 - itting the trimmer guard and

English --- 10 545196777 Rev. 2 4/30/09 ASSEMBLY F itting the trimmer guard and trimmer head S Fit the correct trimmer guard (D) for usewith the trimmer head. Hook the trimmerguard/combination guard onto the fittingon the shaft and secure with the bolt (E). S Fit the drive disc (F) on the output sha...

Page 11 - FUEL HANDLING; Fuel safety; Transport and storage; Fuel; Petrol; Fuel and fuel fumes

English --- 11 545196777 Rev. 2 4/30/09 FUEL HANDLING Fuel safety Never start the machine:1. If you have spilled fuel on it. Wipe off the spillage and allow remaining fuel to evapo-rate. 2. If you have spilled fuel on yourself or your clothes, change your clothes. Wash anypart of your body that has ...

Page 12 - Fuelling; Taking the following; Mixing

English --- 12 545196777 Rev. 2 4/30/09 FUEL HANDLING S Always start by flling half the amount of thepetrol to be used. Then add the entireamount of oil. Mix (shake) the fuel mixture.Add the remaining amount of petrol. S Mix (shake) the fuel mixture thoroughlybefore filling the machine’s fuel tank. ...

Page 13 - STARTING AND STOPPING; Check before starting; Cold engine; When the engine is; Starting and stopping

English --- 13 545196777 Rev. 2 4/30/09 STARTING AND STOPPING Check before starting S Never start the machine indoors. Exhaustfumes can be dangerous if inhaled. S Observe your surroundings and makesure that there is no risk of people oranimals coming into contact with thecutting equipment. S Place t...

Page 14 - Warm engine; Stopping

English --- 14 545196777 Rev. 2 4/30/09 STARTING AND STOPPING CAUTION! Do not pull the starter cord allthe way out and do not let go of the starterhandle when the cord is fully extended.This can damage the machine. NOTE: If engine dies, return blue engine choke lever to the closed position andrepeat...

Page 15 - WORKING TECHNIQUES; General working instructions; Basic safety rules; Basic working techniques; Grass trimming with a trimmer head; Trimming

English --- 15 545196777 Rev. 2 4/30/09 WORKING TECHNIQUES General working instructions IMPORTANT!This section describes the basic safety pre-cautions for working with trimmers. If youencounter a situation where you are uncer-tain how to proceed you should ask an ex-pert. Contact your servicing deal...

Page 17 - MAINTENANCE; Carburetor; Function; If the idle speed can-; Unit/Maintenance Safety

English --- 17 545196777 Rev. 2 4/30/09 MAINTENANCE Carburetor Your Husqvarna product has been designedand manufactured to specifications that re-duce harmful emissions. After the enginehas used 8-- 10 tanks of fuel, the engine willbe run-- in. To ensure that it continues to runat peak performance a...

Page 18 - The inside of the; Spark plug; Cleaning the air filter

English --- 18 545196777 Rev. 2 4/30/09 MAINTENANCE Two -- piece shaft The drive shaft end in the lower shaftshould be lubricated with grease every 30hours. There is a risk that the drive shaftends (splined coupling) will seize if theyare not lubricated regularly. WARNING: The inside of the muffler ...

Page 19 - Bevel gear

English --- 19 545196777 Rev. 2 4/30/09 MAINTENANCE Bevel gear The bevel gear is filled with the right quan-tity of grease at the factory. However, be-fore using the machine you should checkthat the bevel gear is filled three-- quartersfull with grease. Use HUSQVARNA specialgrease. The grease in the...

Page 20 - Maintenance schedule; Maintenance

English --- 20 545196777 Rev. 2 4/30/09 MAINTENANCE Maintenance schedule The following is a list of the maintenance that must be performed on the machine. Most ofthe items are described in the Maintenance section. The user must only carry out the main-tenance and service work described in this Opera...

Page 21 - TECHNICAL DATA; Technical data

English --- 21 545196777 Rev. 2 4/30/09 TECHNICAL DATA Technical data 128LDX EngineCylinder displacement, cm 3 28 Cylinder bore, mm 35 Stroke, mm 28,7 Idle speed, rpm 2800-- 3200 Recommended max. fast idle speed, rpm 11000 Speed of output shaft, rpm 8000 Max. engine output, acc. to ISO 8893, kW 0,8 ...

Page 22 - Approved accessories; DECLARATION OF CONFORMITY; EC Declaration of Conformity (Only applies to Europe)

English --- 22 545196777 Rev. 2 4/30/09 TECHNICAL DATA Model 128LDX (M10 LH arbor shaft thread) Approved accessories Type Cutting attachment / guard, part. no. Trimmer head T25 537 33 83-- 02 / 545 030 901 Plastic blades Tricut 300 mm 531 00 38-- 11 / 545 030 901 Attachments Part. no. Grass blade/gr...

Page 23 - Trimmer Head Line Loading Instructions

English --- 23 545196777 Rev. 2 4/30/09 Trimmer Head Line Loading Instructions 20 i 10 i 3 m 6 m 1 2 3 4 5 6 7 8 9