HP HP PSC 1400 - Manuals

HP HP PSC 1400 – Manual in PDF format online.

Manuals:

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12

Summary

Page 2 - Attach the control panel overlay (if not attached); Bend the bottom of the control panel overlay.

2 • HP All-in-One 4 Attach the control panel overlay (if not attached) a Bend the bottom of the control panel overlay. b Remove the bottom tab and the backing from the overlay. c Lift the lid. Attach the overlay to the device. d Press down on the overlay to ensure it is fi rmly attached. CAUTION: Th...

Page 3 - After you press the; ࣋Եػ౐; USB

HP All-in-One • 3 6 7 5 1 2 3 4 Load plain white paper Press the On/Resume button Connect the power cord and adapter On/Resume After you press the On /Resume button, the green light fl ashes, and then becomes solid. This may take up to a minute. Important: Do not connect the USB cable until instruct...

Page 4 - Remove tape from both cartridges; Pull the pink tab to remove the tape from; both; Do not touch the copper-colored contacts or retape the cartridges.; Open access door; The device must be; On; before you can insert the print cartridges.; ᐺൾࠟଡᕠܚՂऱᓄ൅; ڇ༺Ե٨ٱᕠܚհছΔᇘᆜؘႊڇ

4 • HP All-in-One 9 8 Remove tape from both cartridges Pull the pink tab to remove the tape from both print cartridges. CAUTION: Do not touch the copper-colored contacts or retape the cartridges. Open access door Lower the access door until it stops. Make sure the print carriage moves to the center....

HP Manuals