HP HP PSC 1400 - Manual
HP HP PSC 1400 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Attach the control panel overlay (if not attached); Bend the bottom of the control panel overlay.
- Page 3 – After you press the; ࣋Եػ; USB
- Page 4 – Remove tape from both cartridges; Pull the pink tab to remove the tape from; both; Do not touch the copper-colored contacts or retape the cartridges.; Open access door; The device must be; On; before you can insert the print cartridges.; ᐺൾࠟଡᕠܚՂऱᓄ; ڇ༺Ե٨ٱᕠܚհছΔᇘᆜؘႊڇ
- Page 5 – Insert the tri-color print cartridge; left; Insert the black print cartridge; black; έՓ; ༺ԵԿۥ٨ٱᕠܚ; ༺ᑒऱছֱΖ
- Page 6 – Scan; ! ؚၲሽᆰऱሽᄭΔؘழᓮ࿆ԵΔ൷ထଢோ૿נ; ؚၲሽᆰऱሽᄭ; ! ඊದඊ።Ζലீإऱإ૿ཛՀΔኙᏘੲᑿ૿ࣨऱ
- Page 7 – Choose the correct CD; Continue to the next step.; Windows; My Computer; CD; ڕ࣠ڶ᧩قඔ೯૿ΔᓮຑਊࠟՀψ; CD; Macintosh; CD; Windows
- Page 8 – Connect the USB cable
- Page 9 – Finish software installation; screen. Congratulations on; Make sure you complete all screens,; Troubleshooting; ࠉᅃᘛኟՂऱਐقၞ۩Ζݙګψ; Sign up now; ݙګຌ᧯ڜᇘ; ٺҢޱȈ; ωΖ
- Page 11 – Control Panel Overview; І७ඪټڏтᇭِᇳ݂Ȅ
- Page 12 – ൳ࠫ૿ࣨᄗᨠ; Ӌኵ; Alternate language on other side of page.
2
3
1
HP Photosmart 2600/2700 series all-in-one
User Guide
HP Photosmart 2600/2700 series all-in-one
User Guide
Start Here
Remove all tape and components
Locate components
Windows CD
Macintosh CD
User Guide
print cartridges
power cord and
adapter
control panel overlay
(sticker, may be pre-
attached)
USB cable
The contents of your box may differ.
Follow the steps in order. If you have problems during setup, see
Troubleshooting
on page 10.
Important: Do not connect the USB cable until Step 15 or software may not install
properly.
a
Remove all tape.
b
Lower the paper tray, and then the access door.
Remove the shipping material and components.
HP PSC 1400 All-in-One series Setup Guide
ൕڼၲࡨ
ஞದࢬڶᓄ֗ሿٙ
ބנሿٙ
Windows CD
Macintosh CD
ࠌشृਐত
٨ٱᕠܚ
ሽᄭᒵፖሽᄭ᠏൷ᕴ
൳ࠫ૿ࣨ።ׂ! )ڶᑑ᧘Δ
ױ౨բቃ٣ᇘՂ*
USB
!ᨱᒵ
ץᇘฏփ୲ױ౨ڶࢬฆΖ
ᓮਊᅃޡᨏࠉݧၞ۩Ζڕ࣠൞ڇڜᇘழ࿇سٚ۶ംᠲΔᓮᔹร!
10
!ऱ
ȶᅸᜲ௶၌!ȷ
Ζ
HP PSC 1400 All-in-One series
Ԋ၆ࡾࠒ
१ौȈӵׇԙ؏!
15
!ܖۦҐᎌ࿋Ԋ၆ᡝϞࠉȂϼ!
USB
!ᢟጣȄ
a
! ஞൾࢬڶᓄΖ
b
! ࣋ՀܚΔ٦࣋Հ೯ᖒ॰Ζஞದࢬڶץᇘޗ
ற֗ሿٙΖ
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 • HP All-in-One 4 Attach the control panel overlay (if not attached) a Bend the bottom of the control panel overlay. b Remove the bottom tab and the backing from the overlay. c Lift the lid. Attach the overlay to the device. d Press down on the overlay to ensure it is fi rmly attached. CAUTION: Th...
HP All-in-One • 3 6 7 5 1 2 3 4 Load plain white paper Press the On/Resume button Connect the power cord and adapter On/Resume After you press the On /Resume button, the green light fl ashes, and then becomes solid. This may take up to a minute. Important: Do not connect the USB cable until instruct...
4 • HP All-in-One 9 8 Remove tape from both cartridges Pull the pink tab to remove the tape from both print cartridges. CAUTION: Do not touch the copper-colored contacts or retape the cartridges. Open access door Lower the access door until it stops. Make sure the print carriage moves to the center....
