HP HP Mini 1000 - Manual

2 External component identification Top components Display Item Component Function (1) Internal display switch Turns off the display if the display is closed while the poweris on. (2) Speakers (2) Produce sound. (3) WLAN antennae (2) * Send and receive wireless signals to communicate withwireless lo...

Keys Item Component Function (1) esc key Displays system information when pressed in combinationwith the fn key. (2) Function keys Execute frequently used system functions when pressedin combination with the fn key. (3) fn key Executes frequently used system functions when pressedin combination with...

TouchPad Item Component Function (1) TouchPad on/off button Turns the TouchPad on and off. (2) TouchPad on/off light ● White: TouchPad is on. ● Amber: TouchPad is off. (3) Left TouchPad button * Functions like the left button on an external mouse. (4) TouchPad * Moves the pointer and selects or acti...

Right-side components Item Component Function (1) Vent Enables airflow to cool internal components NOTE: The device fan starts up automatically to cool internal components and prevent overheating. It is normalfor the internal fan to cycle on and off during routineoperation. (2) SD Card Reader Suppor...

Bottom components Item Component Function (1) Battery bay Holds the battery. (2) Battery release latches (2) Release the battery from the battery bay. (3) Memory module compartment Contains the memory module slot. NOTE: The release latch for the memory module compartment cover (not illustrated) is l...

3 Illustrated parts catalog Serial number location The service tag, affixed to the bottom of the device, provides information that may be needed whentroubleshooting system problems. The service tag provides the following information: (1) Product name: This is the product name affixed to the front of...

Device major components Item Description Spare part number (1) Display assembly (includes webcam, 1 microphone, and 2 WLAN antenna transceivers/ cables) 8.9-inch WSVGA BrightView 509698-001 10.2-inch WSVGA AntiGlare 507310-001 Refer to Display assembly components on page 15 , for more display assemb...

Item Description Spare part number Display Screw Kit (for 8.9-inch panels only, not illustrated) 509700-001 Display panel foil shield (not illustrated) 506334-001 Plastics Kit Item Description Spare part number Plastics Kit: 507317-001 (1) Memory module compartment cover (2) HP Mobile Drive cover (o...

4 Removal and replacement procedures Preliminary replacement requirements Tools required You will need the following tools to complete the removal and replacement procedures: ● Flat-bladed screwdriver ● Magnetic screwdriver ● Phillips P0 and P000 screwdrivers Service considerations The following sec...

Drive handling CAUTION: Drives are fragile components that must be handled with care. To prevent damage to the device, damage to a drive, or loss of information, observe these precautions: Before removing or inserting a hard drive, shut down the device. If you are unsure whether the deviceis off or ...

Grounding guidelines Electrostatic discharge damage Electronic components are sensitive to electrostatic discharge (ESD). Circuitry design and structuredetermine the degree of sensitivity. Networks built into many integrated circuits provide some protection,but in many cases, ESD contains enough pow...

Unknown user password If the device you are servicing has an unknown user password, follow these steps to clear the password: NOTE: These steps also clear CMOS. 1. Shut down the device. If you are unsure whether the device is off or in Hibernation, turn the deviceon, and then shut it down through th...

Component replacement procedures This chapter provides removal and replacement procedures. There are as many as 43 screws, in 8 different sizes, that must be removed, replaced, or loosened whenservicing the device. Make special note of each screw size and location during removal and replacement. Ser...

Device feet The device feet are adhesive-backed rubber pads. The feet are included in the Rubber Kit, spare partnumber 504613-001. There are 4 rubber feet that are installed on the base enclosure in the locationsillustrated below. Component replacement procedures 29

Battery Description Spare part number 3-cell, 26-Wh Li-Pol battery for use in all countries and regions except Germany 504610-001 3-cell, 26-Wh Li-Pol battery for use only in Germany 504610-002 Before disassembling the device, follow these steps: 1. Shut down the device. If you are unsure whether th...

Memory module Description Spare part number 1024-MB (PC2-4200, 533-MHz, DDR2) 504600-001 512-MB (PC2-4200, 533-MHz, DDR2) 504599-001 Before removing the memory module, follow these steps: 1. Shut down the device. If you are unsure whether the device is off or in Hibernation, turn the deviceon, and t...

Mass storage devices NOTE: Each hard drive spare part kit and solid-state drive spare part kit includes an FPC cable and bracket. Description Spare part number 60-GB, 4200-rpm hard drive 504601-001 8-GB solid-state drive 507313-001 16-GB solid-state drive 507314-001 Before removing the hard drive or...

5. Remove the bracket from the drive bay (4) . The solid-state drive is attached to the underside of the bracket. Reverse this procedure to install the solid-state drive. Top cover Description Spare part number Top cover (includes TouchPad) 504612-001 Before removing the top cover, follow these step...

WLAN module Description Spare part number Broadcom 4312 802.11/b/g WLAN modules: For use in Canada, the Cayman Islands, Guam, Puerto Rico, the U.S. Virgin Islands,and the United States 504593-001 For use in Afghanistan, Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina,Armenia, Aruba...

System board NOTE: The system board spare part kit includes a processor, USB board, and heat sink assembly. Description Spare part number System board equipped with 1.6-GHz processor 504592-001 Before removing the system board, follow these steps: 1. Shut down the device. If you are unsure whether t...

NOTE: To properly ventilate the device, allow at least a 7.6-cm (3-inch) clearance on the left side of the device. The device uses an electric fan for ventilation. The fan is controlled by a temperature sensor and isdesigned to turn on automatically when high temperature conditions exist. These cond...

5 Setup Utility Starting the Setup Utility The Setup Utility is a ROM-based information and customization utility that can be used even when yourWindows operating system is not working. The utility reports information about the device and provides settings for startup, security, and otherpreferences...

Navigating and selecting in the Setup Utility Because the Setup Utility is not Windows based, it does not support the TouchPad. Navigation andselection are by keystroke. ● To choose a menu or a menu item, use the arrow keys. ● To choose an item in a list or to toggle a field, for example an Enable/D...

Exiting the Setup Utility You can exit the Setup Utility with or without saving changes. ● To exit the Setup Utility and save your changes from the current session: If the Setup Utility menus are not visible, press esc to return to the menu display. Then use the arrow keys to select Exit > Exit S...

System Configuration menu Select To do this Language Support Change the Setup Utility language. Processor C4 State Enable/disable the processor C4 sleep state. Boot Options Set the following boot options: ● f10 and f12 Delay (sec.)—Set the delay for the f10 and f12 functions of the Setup Utility in ...

6 Specifications Device specifications Metric U.S. Dimensions Depth 16.67 cm 6.56 in Width 26.17 cm 10.30 in Height 2.52 cm 0.99 in Weight 10.2-in. LCD, equipped with a 3-cell battery, 60-GB hard drive,1-GB memory, WLAN module, and 2 wireless antennae 1.11 kg 2.45 lbs 10.2-in. LCD, equipped with a 3...

Solid-state drive specifications Performance Transfer modes supported UDMA 0-4, Multiword-DMA 0-2, PIO 0-4 Sustained read 39 MB/sec Sustained write 17 MB/sec Characteristics Interface Parallel ATA (PATA) MLC NAND flash capacity 8 GB, 16 GB Electrical specifications DC supply voltage 3.3 V +/– 5% Sta...

System DMA specifications Hardware DMA System function DMA0 Not applicable DMA1* Not applicable DMA2* Not applicable DMA3 Not applicable DMA4 Direct memory access controller System interrupt specifications Hardware IRQ System function IRQ0 System timer IRQ1 Standard 101-/102-Key or Microsoft® Natura...

System I/O address specifications I/O address (hex) System function (shipping configuration) 000 - 00F DMA controller 000 - CF7 PCI bus 010 - 01F Motherboard resources 020 - 021 Programmable interrupt controller 022 - 03F Motherboard resources 040 - 043 System timer 044 - 05F Motherboard resources 0...

System memory map specifications Memory address System function 00000000 - 0009FFFF System board 000A0000 - 000BFFFF Mobile Intel® 945 Express Chipset Family 000A0000 - 000BFFFF PCI bus 000C0000 - 000CFFFF System board 000D0000 - 000DFFFF PCI bus 000E0000 - 000FFFFF System board 00100000 - 3F7FFFFF ...

7 Screw listing This section provides specification and reference information for the screws and screw locks used inthe device. All screws listed in this section are available in the Screw Kit, spare part number 504614-001,or in the Display Screw Kit, part number 509700-001. Phillips PM1.6×2.5 screw...

8 Backup and recovery Backing up your information NOTE: You can recover only the files that you have previously backed up. HP recommends that you use the Windows backup utility to create a hard drive backup as soon as you set up your device. With the Windows backup utility, you can perform the follo...

Scheduling backups You can schedule backups for the entire system, for recovery points, or for specific files and folders.Backups can be scheduled at specific intervals (daily, weekly, or monthly) or at specific events, such asat system restart or when you log on. To schedule backups: 1. Select Star...

9 Connector pin assignments Audio-in (microphone) Pin Signal 1 Audio signal in 2 Audio signal in 3 Ground Audio-out (headphone) Pin Signal 1 Audio out, left channel 2 Audio out, right channel 3 Ground Audio-in (microphone) 83

RJ-45 (network) Pin Signal 1 Transmit + 2 Transmit - 3 Receive + 4 Unused 5 Unused 6 Receive - 7 Unused 8 Unused Universal Serial Bus Pin Signal 1 +5 VDC 2 Data - 3 Data + 4 Ground 84 Chapter 9 Connector pin assignments

10 Power cord set requirements The wide range input feature of the device permits it to operate from any line voltage from 100 to 120volts AC or from 220 to 240 volts AC. The 3-conductor power cord set included with the device meets the requirements for use in the countryor region where the equipmen...

Requirements for specific countries and regions Country/region Accredited agency Applicable note number Australia EANSW 1 Austria OVE 1 Belgium CEBC 1 Canada CSA 2 Denmark DEMKO 1 Finland FIMKO 1 France UTE 1 Germany VDE 1 Italy IMQ 1 Japan METI 3 The Netherlands KEMA 1 Norway NEMKO 1 The People's R...

Index A AC adapter, spare part number 17, 19 antenna locations 4removal 55spare part number 15, 55 audio, product description 1audio-in jack location 9pin assignments 83 audio-out jack location 9pin assignments 83 B base enclosure, spare part number 14, 20 battery light 7location 10removal 30spare p...