Page 3 - Contents; Product Features
Contents 1 Product Features HP LP2065 and LP2465. . . . . . . . . . . . . . . . . . . . . . . . . . 1–1 2 Safety and Maintenance Guidelines Important Safety Information. . . . . . . . . . . . . . . . . . . . . . 2–1 Maintenance Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . 2–2 Clean...
Page 4 - A Troubleshooting
Contents Front Panel Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–5 Adjusting the Monitor Settings . . . . . . . . . . . . . . . . . . . . 4–6 Using the On-Screen Display . . . . . . . . . . . . . . . . . . 4–6 Using the HP Display Assistant Utility . . . . . . . . . . 4–15 Ide...
Page 7 - Product Features; Pivot capability to rotate display to portrait mode.
1 Product Features HP LP2065 and LP2465 The flat panel monitors have an active matrix, thin-film transistor (TFT), liquid crystal display (LCD). The monitor features include: ■ HP LP2065 model, large 20.1-inch (51 cm) viewable area display with 1600 × 1200 resolution, plus full-screen support for lo...
Page 8 - Plug and play capability if supported by your system.
Product Features ■ USB cable included to connect the monitor’s USB hub to the USB connector on the computer. ■ Accessory rail on monitor to accept optional mounted devices, such as an HP speaker bar. ■ Plug and play capability if supported by your system. ■ On-Screen Display (OSD) adjustments in Eng...
Page 9 - Important Safety Information
2 Safety and Maintenance Guidelines Important Safety Information A power cord is included with your monitor. If another cord is used, use only a power source and connection appropriate for this monitor. For information on the correct power cord set to use with your monitor, refer to the “Power Cord ...
Page 10 - Maintenance Guidelines; To enhance the performance and extend the life of your monitor:
Safety and Maintenance Guidelines Ä CAUTION: For the protection of your monitor, as well as your computer, connect all power cords for your computer and its peripheral devices (such as a monitor, printer, scanner) to some form of surge protection device such as a power strip or Uninterruptible Power...
Page 11 - Do not drop your monitor or place it on an unstable surface.; Cleaning the Monitor; Turn off the monitor and the computer.; Shipping the Monitor
Safety and Maintenance Guidelines ■ Slots and openings in the cabinet are provided for ventilation. These openings must not be blocked or covered. Never push objects of any kind into cabinet slots or other openings. ■ Do not drop your monitor or place it on an unstable surface. ■ Do not allow anythi...
Page 13 - Setting Up the Monitor; Installing the Monitor Pedestal; Using both hands, position the monitor over the pedestal
3 Setting Up the Monitor To set up the monitor, ensure that the power is turned off to the monitor, computer system, and other attached devices, then follow the instructions below. ✎ Be sure the master power switch, located on the rear panel of the monitor, is in the off position. The master power s...
Page 14 - Press down firmly on the monitor to lock the pedestal base in
Setting Up the Monitor 2. Press down firmly on the monitor to lock the pedestal base in place. When the base locks, it will make a clicking sound. Inserting the Monitor into the Pedestal Base ✎ Be sure the pedestal base is securely locked before continuing with the setup. 3–2 User Guide
Page 15 - Component
Setting Up the Monitor Rear Components Rear Components Component Function 1 Cable Lock Provides slot for use with cable security locks. Provision 2 Master Power Turns off all power to the monitor. Switch 3 AC Power Connects the AC power cord to the monitor. Connector 4 DVI-I Connectors Connects the ...
Page 18 - Connecting the Monitor; Place the monitor in a convenient, well-ventilated location
Setting Up the Monitor Connecting the Monitor 1. Place the monitor in a convenient, well-ventilated location near your computer. 2. Connect one end of the USB hub cable to the USB connector on the rear panel of the computer, and the other end to the upstream USB connector on the monitor. Connecting ...
Page 19 - Connect one end of the power cable to the AC power; Place the cables through the cable management channel on
Setting Up the Monitor 3. Connect one end of the power cable to the AC power connector on the back of the monitor, and the other end to an electrical wall outlet. Connecting the Power Cable 4. Place the cables through the cable management channel on the back of the monitor base. Using the Cable Mana...
Page 20 - Adjust the monitor as needed for your comfort using the
Setting Up the Monitor 5. Adjust the monitor as needed for your comfort using the monitor’s tilt, swivel, height, and pivot adjustment capabilities. Tilting the Monitor ✎ The 24” model has a tilt range of -5 to +25 degrees. 3–8 User Guide
Page 22 - The 24” model pivots clockwise instead of counter clockwise.
Setting Up the Monitor ✎ You can change your monitor’s viewing position to portrait. To rotate your display and view information on your screen in portrait mode, you will need to install the Pivot software included on the software and documentation CD. Pivoting the Monitor (20” model) ✎ The 24” mode...
Page 24 - Using the Accessory Rails
Setting Up the Monitor Using the Accessory Rails The monitor features accessory rails on the rear that may be used to mount optional devices, such as the HP speaker bar, to attach to the LCD. Refer to the documentation included with your optional device for detailed mounting instructions. Using the ...
Page 25 - Removing the Monitor Pedestal
Setting Up the Monitor Removing the Monitor Pedestal You can remove the monitor pedestal to mount the monitor on a wall, a swing arm, or other mounting fixture. Ä CAUTION: Before beginning to disassemble the monitor, be sure the monitor is turned off and the power and signal cables are both disconne...
Page 26 - Mounting the Monitor; Remove the monitor pedestal base. Refer to “Removing the; Remove the Quick Release from the pedestal base by
Setting Up the Monitor Mounting the Monitor 1. Remove the monitor pedestal base. Refer to “Removing the Monitor Pedestal” steps in the previous section. Ä CAUTION: This monitor supports the VESA industry standard 100mm mounting holes. To attach a third party mounting solution to the monitor, four 4m...
Page 27 - Mount the HP Flat Panel Monitor Quick Release to a swing
Setting Up the Monitor 3. Mount the HP Flat Panel Monitor Quick Release to a swing arm or other mounting fixture using the four screws removed with the Quick Release in the previous step. Installing the Quick Release Ä CAUTION: The Quick Release can also be installed directly to a wall to mount the ...
Page 28 - Insert the monitor into the Quick Release, and then press
Setting Up the Monitor 4. Insert the monitor into the Quick Release, and then press down firmly on the monitor to lock it in place. When the Quick Release locks, it will make a clicking sound. Inserting the Monitor Panel into the Quick Release 3–16 User Guide
Page 31 - Operating the Monitor; Software and Utilities; Auto-adjustment pattern utility; The Information File
4 Operating the Monitor Software and Utilities The CD that comes with the monitor contains files you can install on your computer: ■ an .INF (Information) file ■ an .ICM (Image Color Matching) file ■ Auto-adjustment pattern utility Adobe Reader is supplied on this CD and can be installed from the me...
Page 32 - The Image Color Matching File; To install the .INF and .ICM files on the computer from the CD:
Operating the Monitor monitor connects directly to the graphics card. Plug and Play does not work through separate BNC type connectors or through distribution buffers/boxes. The Image Color Matching File The .ICM files are data files that are used in conjunction with graphics programs to provide con...
Page 33 - Downloading from the Worldwide Web; Using the Auto-Adjustment Function
Operating the Monitor ✎ You may need to install the digitally signed monitor .INF and .ICM files manually from the CD in the event of an installation error. Refer to the Monitor Driver Software Readme file on the CD. Downloading from the Worldwide Web To download the latest version of .INF and .ICM ...
Page 34 - Allow the monitor to warm up for 20 minutes before
Operating the Monitor To use the auto-adjustment feature: 1. Allow the monitor to warm up for 20 minutes before adjusting. 2. Press the -/Auto button on the monitor front panel. ❏ You can also press the Menu/Select button, then select Auto-Adjustment from the OSD Main Menu. Refer to “Adjusting Monit...
Page 35 - Front Panel Controls; Control
Operating the Monitor Front Panel Controls ‘ Control Function 1 Menu/Select Opens, selects or exits the OSD menu. 2 – ( Minus)/Auto • Navigates backward through the OSD menu and decreases adjustment levels. • When the OSD menu is inactive, activates the auto adjustment feature to optimize the screen...
Page 36 - Adjusting the Monitor Settings; Using the On-Screen Display; If the monitor is not already on, press the Power switch to
Operating the Monitor Adjusting the Monitor Settings The monitor settings can be adjusted from the On-Screen Display (OSD) menu or the HP Display Assistant utility. Using the On-Screen Display Use the On-Screen Display (OSD) to adjust the screen image based on your viewing preferences. To access the...
Page 37 - To select an item from the OSD Menu, use the + or – buttons; OSD Menu Table; Cancel - to return to the previous menu level.
Operating the Monitor 4. To select an item from the OSD Menu, use the + or – buttons to scroll to and highlight your selection, then press the Menu/Select button to select that function. 5. Adjust the item using the + or – buttons on the front panel to adjust the scale. 6. After adjusting the functi...
Page 38 - OSD Menu
Operating the Monitor OSD Menu Icon Main Menu Submenu Description Brightness Adjusts the brightness level of the screen. The factory default range is 90. Contrast Adjustable Adjusts the contrast level of scale the screen. The factory default range is 80. Image Control Adjusts the screen image Auto A...
Page 44 - Optimizing Digital Conversion
Operating the Monitor OSD Menu Icon Main Menu Submenu Description Total hours Reports the total hours of backlight operation. Video Input Control Selects the default or primary video input signal when the monitor is connected to two active and valid video sources. The monitor will automatically dete...
Page 45 - Using the HP Display Assistant Utility
Operating the Monitor ✎ The Clock must first be set correctly since the Clock Phase settings are dependent on the main Clock setting. Use these controls only when the auto-adjust function does not provide a satisfactory image. ■ Clock—Increase/decrease the value to minimize any vertical bars or stri...
Page 46 - Identifying Monitor Conditions
Operating the Monitor ■ Multiple preset display settings for a single user based on content and ambient lighting. ■ Asset Management and Power Management capabilities that include remote control for individual or a group of displays on the domain from a centralized console application. The HP Displa...
Page 47 - Sleep Timer Mode; Set Current Time
Operating the Monitor ■ Multiple Inputs are Active— Use the OSD to select the desired video input— Indicates the monitor is connected to two video inputs. The monitor is trying to display both inputs, but after 10 seconds the monitor uses the default signal input. ■ Auto Adjustment is in Progress— I...
Page 49 - When you are finished, select Save and Return to exit the; HP Display LiteSaver; Installing the HP Display LiteSaver Software; Select “Install HP Display LiteSaver Software.”
Operating the Monitor 14. When you are finished, select Save and Return to exit the menu. The fifth selection, Sleep Now, turns the monitor backlights off immediately and stays in sleep mode until the next On Time activates or a monitor button is pressed. HP Display LiteSaver HP Display LiteSaver is...
Page 50 - Select the following options to configure the HP Display; Configure Options
Operating the Monitor 4. Select the following options to configure the HP Display LiteSaver features: Configure Options Function Enable Display LiteSaver Enables the HP Display LiteSaver functions; deselect to disable the HP Display LiteSaver. Display Off Sets the time when the monitor automatically...
Page 51 - sRGB Support
Operating the Monitor Configure Options Function OK Stores the current settings and minimizes HP Display LiteSaver to the System Tray. Cancel Restores the previous settings and minimizes HP Display LiteSaver to the System Tray. HP Display LiteSaver will continue to run. Help Opens the online help fi...
Page 52 - Changing the Color Temperature
Operating the Monitor Changing the Color Temperature 1. Press the Menu button on the front panel of the monitor to launch the Main Menu of the OSD. 2. Select Advanced Menu to access all options in the Main Menu. 3. Select Color to display the Color Temperature menu. 4. Select sRGB. 5. Select Save an...
Page 53 - To activate a color profile for your monitor, you must set it as
Operating the Monitor 5. To activate a color profile for your monitor, you must set it as the Default Monitor Profile. Select “sRGB Color Space Profile,” then click Set as Default button. 6. Click Apply or OK. User Guide 4–23
Page 55 - Troubleshooting; Solving Common Problems
A Troubleshooting Solving Common Problems The following table lists possible problems, the possible cause of each problem, and the recommended solutions. Problem Possible Cause Solution Screen is blank. Power cord is disconnected. Connect the power cord. Power switch on front panel of the monitor is...
Page 58 - Using the Worldwide Web
Troubleshooting Problem Possible Cause Solution The HP Display LiteSaver may not be compatible with your computer system. Some notebook computers are not compatible and the monitor power can not be controlled. Confirm that the HP Display LiteSaver is compatible with your system. 1. Right-click on th...
Page 59 - Preparing to call Technical Support
Troubleshooting Preparing to call Technical Support If you cannot solve a problem using the troubleshooting tips in this section, you may need to call technical support. Have the following information available when you call: ■ The monitor ■ Monitor model number ■ Serial number for the monitor ■ Pur...
Page 61 - Technical Specifications
B Technical Specifications ✎ All performance specifications are provided by the component manufacturers. Performance specifications represent the highest specification of all HP’s component manufacturers’ typical level specifications for performance and actual performance may vary either higher or l...
Page 64 - Recognizing Preset Display Resolutions
Technical Specifications LP2465 Specifications (Continued) Relative Humidity 20 to 80% Power Source 100 – 240 VAC, 50-60 Hz Altitude: Operating 0 to 12,000 feet 0 to 3657.6 m Storage 0 to 40,000 feet 0 to12192 m Power Consumption <110 watts (maximum) Input Terminal Two DVI-I connectors with cable...
Page 65 - Factory Preset Display Modes
Technical Specifications LP2065 Model Factory Preset Display Modes Preset Pixel Format Horz Freq (kHz) Vert Freq (Hz) 1 640 x 480 31.5 59.9 2 640 x 480 37.5 75.0 3 640 x 480 43.3 85.0 4 720 x 400 31.5 70.1 5 800 x 600 37.9 60.3 6 800 x 600 53.7 85.1 7 832 x 624 49.7 74.6 8 1024 x 768 48.4 60.0 9 102...
Page 67 - Entering User Modes; You are not using a standard graphics adapter.
Technical Specifications Factory Preset Display Modes (Continued) Preset Pixel Format Horz Freq (kHz) Vert Freq (Hz) *20 1600 x 1200 93.8 75.0 21 1680 x 1050 65.3 60.0 *22 1920 x 1080 67.2 60.0 23 1920 x 1200 74.0 60.0 *24 1920 x 1200 74.6 60.0 * For analog inputs only. Entering User Modes The video...
Page 68 - Energy Saver Feature
Technical Specifications Energy Saver Feature When the monitor is in its normal operating mode, the monitor uses less than 55 watts of power and the Power light is green. The monitor also supports a reduced power state. The reduced power state will be entered into if the monitor detects the absence ...
Page 69 - Agency Regulatory Notices; Reorient or relocate the receiving antenna.
C Agency Regulatory Notices Federal Communications Commission Notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a res...
Page 70 - Modifications; For questions regarding your product, contact:
Agency Regulatory Notices Modifications The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by Hewlett Packard Company may void the user's authority to operate the equipment. Cables Connections to this device must be made wit...
Page 71 - Materials Disposal; Mercury in the fluorescent lamp in the display LCD.; Canadian Notice; This product complies with the following EU Directives:
Agency Regulatory Notices To identify this product, refer to the Part, Series, or Model number found on the product. Materials Disposal This HP product contains the following materials that might require special handling at end-of-life: ■ Mercury in the fluorescent lamp in the display LCD. ■ Lead in...
Page 73 - Japanese Notice
Agency Regulatory Notices Japanese Notice Korean Notice Power Cord Set Requirements The monitor power supply is provided with Automatic Line Switching (ALS). This feature allows the monitor to operate on input voltages between 100-120V or 200-240V. The power cord set (flexible cord or wall plug) rec...
Page 74 - Japanese Power Cord Requirements
Agency Regulatory Notices cross-sectional area of the wire must be a minimum of 0.75 mm² or 18AWG, and the length of the cord must be between 6 feet (1.8 m) and 12 feet (3.6 m). If you have questions about the type of power cord to use, contact your HP authorized service provider. A power cord shoul...
Page 75 - The HP display does not have more than:
D LCD Monitor Quality and Pixel Policy The TFT monitor uses high-precision technology, manufactured according to HP standards, to guarantee trouble-free performance. Nevertheless, the display may have cosmetic imperfections that appear as small bright or dark spots. This is common to all LCD display...
