HP DL120 - Manual

Customer Self Repair 7 Riparazione da parte del cliente Per abbreviare i tempi di riparazione e garantire una maggiore flessibilità nella sostituzione di parti difettose, i prodotti HP sono realizzati con numerosi componenti che possono essere riparati direttamente dal cliente (CSR, Customer Self Re...

Customer Self Repair 8 Customer Self Repair HP Produkte enthalten viele CSR-Teile (Customer Self Repair), um Reparaturzeiten zu minimieren und höhere Flexibilität beim Austausch defekter Bauteile zu ermöglichen. Wenn HP (oder ein HP Servicepartner) bei der Diagnose feststellt, dass das Produkt mithi...

Customer Self Repair 9 Reparaciones del propio cliente Los productos de HP incluyen muchos componentes que el propio usuario puede reemplazar ( Customer Self Repair , CSR) para minimizar el tiempo de reparación y ofrecer una mayor flexibilidad a la hora de realizar sustituciones de componentes defec...

Customer Self Repair 12 Reparo feito pelo cliente Os produtos da HP são projetados com muitas peças para reparo feito pelo cliente (CSR) de modo a minimizar o tempo de reparo e permitir maior flexibilidade na substituição de peças com defeito. Se, durante o período de diagnóstico, a HP (ou fornecedo...

Illustrated parts catalog 17 Illustrated parts catalog Mechanical components

Illustrated parts catalog 27 HP contact information For the name of the nearest HP authorized reseller: • In the United States, call 1-800-345-1518. • In Canada, call 1-800-263-5868. • In other locations, refer to the HP website at www.hp.com . For HP technical support: • In North America: ○ Call 1-...

Removal and replacement procedures 28 Removal and replacement procedures Required tools In performing any hardware configuration procedure you may need the following tools: • T10/T15 wrench (secured on the rear panel) • Phillips screwdriver (for ODD replacement) The following references and software...

Removal and replacement procedures 29 Symbols on equipment The following symbols may be placed on equipment to indicate the presence of potentially hazardous conditions. This symbol indicates the presence of hazardous energy circuits or electric shock hazards. Refer all servicing to qualified person...

Removal and replacement procedures 30 Electrostatic discharge information An electrostatic discharge (ESD) can damage static-sensitive devices or microcircuitry. Proper packaging and grounding techniques are necessary precautions to prevent damage. To prevent electrostatic damage, observe the follow...

Removal and replacement procedures 31 Post-installation procedure 1. Perform the steps below after installing or removing a server component. 2. Be sure all components are installed according to the described step-by-step instructions. 3. Check to make sure you have not left loose tools or parts ins...

Removal and replacement procedures 32 4. Disconnect the AC power cord from the AC outlet and then from the server. 5. Check that the power LED indicator is turned off and that the fan noise has stopped. 6. Disconnect all external peripheral devices from the server. Cable management Always follow goo...

Removal and replacement procedures 34 Drive bay configuration The server supports five drive bays—four drive bays for 3.5-inch hot-plug or non-hot-plug SATA and SAS hard disk drives (HDD) and one drive bay for a slim-type 9.5 mm SATA optical disc drive (ODD). The type and capacity of drives vary bas...

Removal and replacement procedures 35 System drive cable management The figures in this section illustrate the system drives' data and power cable connections. Observe the proper cable management guidelines described on page 32 when routing the cables. For a clearer view of the cable connectors loca...

Removal and replacement procedures 36 Hot-plug SAS HDD data cable management Item Description 1 – 4 SAS HDD cable 5 SATA ODD cable 6 SAS LED cable 7 BBWC cable 8 Internal USB cable (optional) 9 HDD backplane I2C cable 10 HDD backplane SGPIO cable

Removal and replacement procedures 37 Hot-plug HDD power cable management Item PSU cable label 400W power supply 500W power supply 1 P2 PWRCN2 on the system board — 4 P2 — 4-pin power extension cable 2 P1 PWRCN1 on the system board — 3 P1 — 24-pin power extension cable P4 HDD backplane board — 5 P7 ...

Removal and replacement procedures 39 Hot-plug backplane board If you decide to switch from a non-hot-plug hard drive configuration to a hot-plug one, you need to install the hot-plug backplane board. Observe the proper cable management guidelines described on page 32 when routing the hot-plug backp...

Removal and replacement procedures 41 Hard drives Hard drives installed in the server are labeled as HDD 1 to HDD 4, from left to right, when viewed from the front of the server. The low form factor (LFF) drive bays can accommodate 3.5-inch hot-plug or non-hot-plug SATA and SAS drives. The type and ...

Removal and replacement procedures 46 SAS hard drive a. Connect the appropriate SAS signal cable to the new hard drive ( 1 ). b. Connect the appropriate power cable to the SAS signal cable ( 2 ). 7. Perform the post-installation procedure. Optical disc drive The server has a default slim-type 9.5 mm...

Removal and replacement procedures 49 7. Perform the post-installation procedure. Flash-backed write cache procedures Two types of procedures are provided for the FBWC option: • Removal and replacement of failed components: • Removing the cache module • Removing the capacitor pack • Recovery of cach...

Removal and replacement procedures 52 9. Install the capacitor pack. 10. Route the cable. 11. Install the access panel. 12. Install the server into the rack. 13. Power up the server. Flash-backed write cache capacitor pack To remove the component: 1. Back up all data. 2. Close all applications. 3. P...

Removal and replacement procedures 54 System board configuration Refer to the following sections for instructions about how to remove or replace the processor, the memory modules, the expansion cards, and the system battery. Procedure for installing the SAS controller board option kit is also provid...

Removal and replacement procedures 55 Processor installation WARNING: To reduce the risk of personal injury from hot surfaces, allow the heat sink and the processor to cool before touching them. CAUTION: To prevent the heat sink from tilting to one side during installation/removal procedures, observ...

Removal and replacement procedures 60 Memory The system has six DIMM slots that support both unbuffered and registered DIMM (UDIMM and RDIMM) with ECC support. The DIMM slots are divided into two channels of three DIMM slots each. Memory installation guidelines Observe the following important guidel...

Removal and replacement procedures 62 Expansion board System board PCI expansion slots There are two PCI Express expansion slots on the system board. Item Slot code Slot type Interconnect Function 1 PCIE2 PCI Express x8 x4 Supports a half-length/low-profile riser board 2 PCIE1 PCI Express x16 x16 Su...

Removal and replacement procedures 63 PCI cage The two PCI Express riser boards attached to the PCI cage convert the functionality of the system board expansion slots to a pair of slots positioned at a 90 ° angle from the system board. Item Description 1 Half-length/low-profile PCI Express x16 riser...

Removal and replacement procedures 65 3. Perform the post-installation procedure. Installing an expansion board Expansion board installation guidelines The system supports up to two expansion boards at a time. Use only HP supported expansion boards of the following types: • Full-length/full-height P...

Removal and replacement procedures 67 8. Reinstall the PCI cage to the chassis 9. Connect the necessary cable(s) to the board. Refer to the documentation that came with the board. 10. Perform the post-installation procedure. SAS controller board option kit If you intend to change the hard drives fro...

Removal and replacement procedures 72 System battery The server uses a nonvolatile memory that requires a battery to retain system information when power is removed. This 3-volt 220-mAh lithium coin cell RTC battery is located on the system board. If the server no longer automatically displays the c...

Removal and replacement procedures 75 System fan The server has three system fans located on the chassis’ center wall. The figure below identifies the system fans by their device number and shows their corresponding cable connections. Number Description System board connector 1 Processor fan 1 FAN1 ...

Removal and replacement procedures 77 Power supply unit Located on the right rear side of the server is a single standard autoranging 400W PSU with PFC (power factor correction) function. You can replace this default PSU with a 500W model. The 500W non-hot-plug PSU option kit includes the following:...

Removal and replacement procedures 78 PSU replacement warnings Observe the following reminders to reduce the risk of personal injury from electric shock hazards and/or damage to the equipment • Installation of the power supply unit should be referred to individuals who are qualified to service serve...

Diagnostics tools 83 Diagnostics tools Troubleshooting resources NOTE: For common troubleshooting procedures, the term "server" is used to mean servers and server blades. The HP ProLiant Servers Troubleshooting Guide provides simple procedures for resolving common problems as well as a compr...

Diagnostics tools 84 Survey Utility Survey Utility, a feature within HP Insight Diagnostics, gathers critical hardware and software information on ProLiant servers. This utility supports operating systems that may not be supported by the server. For operating systems supported by the server, refer t...

Diagnostics tools 85 Open Services Event Manager OSEM is a standalone tool that performs real-time reactive and proactive service event filtering, analysis, and notification. The tool gathers event data from SNMP traps or information provided over an HTTP interface and notifies an administrator or H...

Diagnostics tools 86 Phoenix SecureCore BIOS software Your ProLiant server uses BIOS to boot up the system. The Phoenix SecureCore BIOS software is a ROM BIOS-based firmware that allows reliability, manageability, and connectivity for server platforms. This software contains a set of programs perman...

Diagnostics tools 88 Setup Utility navigation keys Use the following keyboard keys to work your way through the various menu and submenu screens of the Setup Utility. Key Functions ← and → To move between selections on the menu bar. ↑ and ↓ To move the cursor to the field you want. The currently sel...

Diagnostics tools 89 Setup Utility menus The Setup Utility provides a menu bar with the menu selections. The menu bar choices are described in the following sections. Main menu Field Description Product Name Server model name ProLiant BIOS System BIOS revision number BIOS Version System BIOS version...

Diagnostics tools 90 Boot Features submenu Field Description Options Embedded VGA Control Select the status of the embedded graphics controller when an external VGA card is installed. • Auto Detect – Disable the embedded graphics controller when an external VGA card is installed. • Always Enabled – ...

Diagnostics tools 91 Field Description Options Splash Screen Enable this option to display the splash screen during bootup. Enabled Disabled POST Speed Up Enable this option to skip certain POST routines and shortening others. This will decrease the time needed to boot up the system. Enabled Disable...

Diagnostics tools 92 Field Description Options Advanced Chipset Control Displays the settings related to the system chipsets. Press Enter to access the related submenu. Advanced Processor Options Displays the settings related to the processor. Press Enter to access the related submenu. I/O Device Co...

Diagnostics tools 94 Advanced Processor Options submenu Field Description Options Active Processor Select the number of CPU cores to activate. Max. Cores Two cores One core Processor Hyper-Threading Select whether to enable Intel Hyper-Threading (HT) Technology in your server. HT enables the host op...

Diagnostics tools 96 I/O Device Configuration submenu Field Description Options Embedded Serial Port Mode Select the serial port operation mode. • BMC – Only the BMC command line interface (CLI) is available at the BMC UART. • Shared – The switching operation between the BMC CLI and USI is available...

Diagnostics tools 97 Hard Disk Configuration submenu Field Description Options SATA Mode Selection Select whether to enable the Advanced Host Controller Interface (AHCI) function of the SATA controller. • Enhanced – The SATA controller enables AHCI. The RAID function (if available) will also be enab...

Diagnostics tools 99 Field Description Options LBA Mode Control Select whether to use the logical block addressing (LBA) scheme instead of the CHS scheme in specifying the location of data blocks. Note: When the Type field is set to Auto this field is automatically detected and is not user-configura...

Diagnostics tools 100 Field Description Options USB BIOS Support Select whether to allow USB keyboard usage when accessing the BIOS Setup. Enabled Disabled USB Device Boot Priority Set this field to High to enable the server to look for bootable USB devices first before any other device in booting t...

Diagnostics tools 103 • IPMI watchdog timer events • power ON/OFF requests Each SEL entry indicates the: • Event ID (number assigned to identify the event type) • Device sensor that was activated • Device that caused the event • Date and time of event occurrence • Event description Real Time Sensor ...

Diagnostics tools 104 Field Description Options BIOS Serial Console Port Select whether to enable the serial port for console redirection. When enabled, users can access the system BIOS and monitor the server from a remote location using a serial port connection. Enabled Disabled Baud Rate Select th...

Diagnostics tools 107 To change the admin password: 1. In the Security menu screen, select the Admin Password field, and then press Enter . 2. Type the original password in the password box. 3. Type a new password, and then press Enter . 4. Retype the new password to verify the first entry, and then...

Diagnostics tools 108 By default, the server searches for boot devices in the following order: • Removable devices • CD-ROM/DVD-ROM drive • Hard drive • MBA v11.1.4.1 Slot 1E00 – This option enables PXE implementation (Preboot Execution Environment—remote boot over LAN) using the embedded NIC port. ...

Diagnostics tools 109 BIOS splash screen The BIOS splash screen displays basic and important information about the current server configuration and is necessary for troubleshooting and may be required when asking for technical support. It is recommended that you check this screen during the initial ...

Diagnostics tools 110 To manually record the custom Setup values: 1. Access the Setup utility. 2. Go through each menu and submenus page, and press Print Screen to make a hard copy. 3. For multiple page menus, move to each page and print each screen. 4. If a printer is not available, write down the ...

Diagnostics tools 111 To clear CMOS: 1. Perform the pre-installation procedure. 2. Locate the SW4 switch on the system board. 3. If necessary, remove any assemblies or cables that prevent access to the SW4 switch. 4. Flip switch 1 to the On position for about 20 to 30 seconds. 5. Flip switch 1 back ...

Diagnostics tools 112 Flashing the system BIOS Flash the system BIOS to ensure server support for new hardware releases. In cases of a damaged or corrupted BIOS code, you need to execute the BIOS boot block code, then flash the BIOS to make sure it has the latest BIOS image. Refer to the previous se...

Diagnostics tools 114 Error code Error message Corrective action/description 0270 Real time clock error Real-Time Clock (RTC) fails BIOS hardware test. May require board repair. 0271 Check date and time settings BIOS found date or time is out of range. May require setting legal date (1991-2099). Acc...

Connectors, switches, and LEDs 115 Connectors, switches, and LEDs Connectors and components Front panel NOTE: In the below figure, the top section shows a system with hot plug hard drives, the bottom part shows a non hot plug model. Item Icon Component 1 Optical disc drive (ODD) 2 Serial label pull ...

Connectors, switches, and LEDs 116 Item Icon Component 11 Hard disk drive 3 12 Hard disk drive 2 13 Hard disk drive 1 Rear panel Item Icon Component 1 PSU cable socket 2 PS/2 keyboard port 3 PS/2 mouse port 4 / Embedded NIC 1/shared management NIC port 5 Embedded NIC 2 port 6 Serial port 7 Half-leng...

Connectors, switches, and LEDs 117 System board Item Code Component 1 PWRCN1 24-pin ATX system board power connector 2 DIMM6B Channel B 1 st DDR3 memory slot 3 DIMM5D Channel B 2 nd DDR3 memory slot 4 DIMM4F Channel B 3 rd DDR3 memory slot 5 DIMM3A Channel A 1 st DDR3 memory slot 6 DIMM2C Channel A ...

Connectors, switches, and LEDs 119 System buttons, switches, and jumpers UID button with LED indicator Press this front panel UID button to illuminate the LED indicator recessed underneath it. This is to mark a particular unit within a server group for purpose of identification during servicing or m...

Connectors, switches, and LEDs 120 System configuration switch SW4 is an eight-position switch on the system board used to implement the various protections and override functions. All eight switches will have the off position as the default setting. Position Function Default Description 1 BIOS CMOS...

Connectors, switches, and LEDs 121 System jumpers Item Function Status Status description 1 – 2 Normal operation (default) 1 BMC password reset jumper (JP4) 2 – 3 Reset the BMC password 1 – 2 Normal operation (default) 2 BMC recovery jumper (JP5) 2 – 3 Clear the BMC configuration data

Connectors, switches, and LEDs 122 Status LED indicators The Systems Insight Display (SID) panel on the front panel provides a quick visible indication of system status. The embedded NIC 1/2 and management NIC ports on the rear panel have their own activity/link LED indicators to reflect their statu...

Connectors, switches, and LEDs 124 System board LED indicators The system board LED indicators monitors the status of the hardware components. When any of these indicators are activated, the system health indicator on the front panel lights up. Item Code Function Status Description 1 LED1 Processor ...

Connectors, switches, and LEDs 125 FBWC module LEDs The FBWC module has two single-color LEDs (green and amber). The LEDs are duplicated on the reverse side of the cache module to facilitate status viewing. Green LED Amber LED Interpretation Off On A backup is in progress. Flashing (1 Hz) On A resto...

System specifications 126 System specifications Hardware specifications System unit Item Description Processor socket Intel LGA 1156 Processor support Intel Celeron G1101, Intel Pentium G6950, Intel Core i3-530, Intel i3-540, and Intel Xeon 3400 series processors Core logic Intel Platform Controller...

System specifications 129 Software specifications Item Description Network operating system (NOS) support • Microsoft Windows Server 2003 R2 • Microsoft Windows Server 2003 R2 Enterprise Edition • Microsoft Windows Server 2003 R2 Web Edition • Microsoft Windows Server 2003 R2 Embedded Edition • Micr...

System specifications 130 Physical specifications Item Description System board platform uATX (Micro Advanced Technology Extended) System board dimensions Length Width 244 mm (9.6 in) 244 mm (9.6 in) Server dimensions (including the front bezel) Height Width Depth 42.93 mm (1.69 in) 700.02 mm (27.56...

Index 131 Index A AC power power-down procedure, 30 status indicator, 119 admin password changing, 103 removing, 103 resetting, 103 setting, 102 air baffle removing, 53 B Basic Input/Output System, 83 battery location, 70 replacement warnings, 70 replacing, 71 BIOS. See Basic Input/Output System CMO...