HP 4400 - Manuals

HP 4400 – Manual in PDF format online.

Manuals:

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11

Summary

Page 3 - About this document; You can only add one disk enclosure online at a time.; Before you begin; Check the kit contents to make sure you have the items listed in; Attaching the rails

About this document This document describes how to install an M6412 drive enclosure into a cabinet as part of an EVA4400storage array. The drive enclosure installation may be performed while the array is in operation. NOTE: You can only add one disk enclosure online at a time. Before you begin Read ...

Page 6 - Remove the bezel covers from each side of the enclosure (see

Installing the drive enclosure 1. Remove the bezel covers from each side of the enclosure (see Figure 6 (page 6) ). CAUTION: Be careful when removing the bezel covers so as to not break the locking tabs that secure the covers to the enclosure. Figure 6 Bezel cover removal 2. Align the enclosure with...

Page 8 - Figure 11 Inserting a drive blank; Cabling the enclosure while offline; Power down the array.

7. Insert drive blank into any slots without a disk drive. Push the drive blank until you detect a click. Figure 11 Inserting a drive blank Cabling the enclosure Two methods are described for cabling a new drive enclosure. The online method allows a driveenclosure to be added to a powered operationa...

HP Manuals