HP 4400 - Manual
HP 4400 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – About this document; You can only add one disk enclosure online at a time.; Before you begin; Check the kit contents to make sure you have the items listed in; Attaching the rails
- Page 6 – Remove the bezel covers from each side of the enclosure (see
- Page 8 – Figure 11 Inserting a drive blank; Cabling the enclosure while offline; Power down the array.
- Page 10 – Cabling the enclosure while online
- Page 11 – module B port 2 of the newly installed drive enclosure (3,; Alternate enclosure cabling; and
HP EVA4400 M6412 drive enclosure
installation instructions
HP Part Number: 5697-0975
Published: June 2011
Edition: Second
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
About this document This document describes how to install an M6412 drive enclosure into a cabinet as part of an EVA4400storage array. The drive enclosure installation may be performed while the array is in operation. NOTE: You can only add one disk enclosure online at a time. Before you begin Read ...
Installing the drive enclosure 1. Remove the bezel covers from each side of the enclosure (see Figure 6 (page 6) ). CAUTION: Be careful when removing the bezel covers so as to not break the locking tabs that secure the covers to the enclosure. Figure 6 Bezel cover removal 2. Align the enclosure with...
7. Insert drive blank into any slots without a disk drive. Push the drive blank until you detect a click. Figure 11 Inserting a drive blank Cabling the enclosure Two methods are described for cabling a new drive enclosure. The online method allows a driveenclosure to be added to a powered operationa...
