Page 2 - PRODUCT LABEL; AS/NZS CISPR 14.1 Electromagnetic Compatibility Requirements.
2 Dear Customer, Thank you for having purchased and given your preference to our product. The safety precautions and recommendations reported below are for your own safety and that of others. They will also provide a means by which to make full use of the features offered by your appliance. Please k...
Page 3 - IMPORTANT SAFETY PRECAUTIONS AND RECOMMENDATIONS; professionally qualified technician.; This film must be removed before using the; IMPORTANT: The use of suitable protective clothing/gloves is
3 IMPORTANT SAFETY PRECAUTIONS AND RECOMMENDATIONS IMPORTANT: This appliance is designed and manufactured solely for the cooking of domestic (household) food and is not suitable for any non domestic application and therefore should not be used in a commercial environment. The appliance guarantee wil...
Page 4 - WARNING: During use the appliance and its accessible parts
4 • Do not use a steam cleaner because the moisture can get into the appliance therefore making it unsafe. • Do not touch the appliance with wet or damp hands (or feet). • Do not use the appliance whilst in bare feet. • If you should decide not to use this appliance any longer (or decide to substitu...
Page 6 - INSTALLATION; FITTING REQUIREMENTS; The oven can be fitted in standard units, 60 cm width and depth.
6 INSTALLATION CAUTION: ■ This appliance must be installed in accordance with these installation instructions. ■ This appliance shall only be serviced by authorised personnel. ■ This appliance is to be installed only by an authorised person in compliance with the current electrical regulations and i...
Page 8 - FIXING THE OVEN; fixing is only complementary.; Note; adjacent cabinets due to an increase in temperature.; Do not lift this oven by the door handle.; the furniture door and the oven frame.; Figure 3
8 FIXING THE OVEN Introduce the oven into the furniture opening and fix it with 4 screws (not supplied) as figure 3. It is essential that the oven rests on a surface which will support its weight, as the screw fixing is only complementary. Note It is essential that when installing your oven adequate...
Page 9 - Air Flow; Please take extra care not to damage the lower trim of the oven.; clearance between the bottom of the door and the lower trim.; resulting from incorrect installation.
9 OVEN DOOR LOWER TRIM AIR FLOW Air Flow Oven Door Lower Trim IMPORTANT: Please take extra care not to damage the lower trim of the oven. Ensure the oven sits on wooden blocks or similar supports when it is removed from the carton as shown in above diagram. This will prevent any damage to the lower ...
Page 10 - ELECTRICAL REQUIREMENTS; the load specified on the plate.; electrical regulations.
10 ELECTRICAL REQUIREMENTS ■ The appliance must be connected to the mains checking that the voltage corresponds to the value given in the rating plate and that the electrical cable sections can withstand the load specified on the plate. ■ A suitable isolating switch providing full disconnection from...
Page 11 - REPLACING THE POWER SUPPLY CABLE; To connect the supply cable:; VOLTAGE AND POWER CONSUMPTION; Figure 6
11 REPLACING THE POWER SUPPLY CABLE Important! This appliance must be connected to the electricity supply only by an authorised person. To connect the supply cable: ■ Unhook the terminal board cover by inserting a screwdriver into the two hooks “ A ” (fig. 5). ■ Open the cable gland by unscrewing sc...
Page 12 - ELECTRIC DIAGRAM; Figure 8
Page 13 - ELECTRIC DIAGRAM KEY; TM
13 ELECTRIC DIAGRAM KEY F1 Oven switch TM Oven thermostat LF Oven lamp PR Oven programmer CF Cooling fan motor V Oven fan motor G Oven grill element C Oven circular element TL Thermal overload TL1 Cooling fan motor thermal overload S1 Line pilot lamp S2 Thermostat pilot lamp M Terminal block T Earth...
Page 14 - USE AND CARE; USING THE OVEN FOR THE FIRST TIME; The rack must be fitted so that the safety; Figure 9a
14 USE AND CARE USING THE OVEN FOR THE FIRST TIME Operate as follows: ■ Assemble the wire racks on the oven walls using the 2 screws (fig. 9a). ■ Slide into the guides, the shelf and the tray (fig. 9b). The rack must be fitted so that the safety notch, which stops it sliding out, faces the inside of...
Page 15 - Controls description; CONTROL PANEL
15 3 4 1 5 2 Figure 10 Please note: Your appliance has been fitted with a cooling fan to achieve optimum efficiency of the controls and to ensure lower surface temperatures are maintained. The cooling fan motor switches ON/OFF depending on temperature. Depending on cooking temperatures and times, th...
Page 16 - COOKING WITH FAN OVEN; GENERAL FEATURES; obtained in the following ways:
16 COOKING WITH FAN OVEN Attention: The oven door becomes very hot during operation. Keep children away. GENERAL FEATURES No. 3 different thermostatic control functions are available to satisfy all cooking requirements, provided by 2 heating elements which are: ■ Circular element 2200 W (@230V) ■ Gr...
Page 18 - COOKING ADVICE; The external parts of the appliance become hot during operation.; OVEN COOKING
18 VENTILATED GRILL COOKING The infra-red grill and the fan are on. The heat is mainly diffused by radiation and the fan then distributes it throughout the oven. Use with the oven door closed and the thermostat knob must be regulated between 50°C and 200°C maximum. It is necessary to preheat the ove...
Page 19 - The only precautions to follow are:; ROASTING; To obtain classical roasting, it is necessary to remember:; USE OF THE GRILL; GRILLING AND COOKING “AU GRATIN”; Grilling with the oven door closed.
19 REGENERATION Set the switch to position and the thermostat knob to position 150°C. Bread becomes fragrant again if wet with a few drops of water and put into the oven for about 10 minutes at the highest temperature. SIMULTANEOUS COOKING OF DIFFERENT FOODS The oven set on position gives simultaneo...
Page 20 - RECOMMENDED COOKING TEMPERATURE; Quiches and flans
20 RECOMMENDED COOKING TEMPERATURE Food °C °F Gas Mark Shelf Position* Cooking Time (approx) CAKES Victoria sandwich 190 375 5 2 or 3 20-25 mins Small cakes/buns 190 375 5 1 and 2 15-20 mins Maidera cake 180 350 4 2 or 3 20 mins Fruit cake 170 325 3 3 1 3/4 hours Rich fruit cake 150 300 2 3 or 4 2 1...
Page 21 - DIGITAL ELECTRONIC PROGRAMMER; Description of the buttons:; AUTO
21 DIGITAL ELECTRONIC PROGRAMMER The electronic clock/programmer is a device which groups together the following functions:• 24 hours clock with illuminated display. • Timer (up to 23 hours and 59 minutes). • Program for automatic oven cooking. • Program for semi-automatic oven cooking. Description ...
Page 22 - symbol is flashing push the
22 ELECTRONIC CLOCK (fig. 14) The programmer is equipped with an electronic clock with illuminated numbers which indicates hours and minutes. Upon immediate connection of the oven or after a power cut, three zeros will flash on the programmer display. To set the correct time of day it is necessary t...
Page 23 - AUTOMATIC OVEN COOKING; flashes on the display and a; The cooking program may be cancelled; will flash and a buzzer
23 AUTOMATIC OVEN COOKING To cook food automatically in the oven, it is necessary to: 1. Set the length of the cooking period.2. Set the end of the cooking time.3. Set the temperature and the oven cooking program. These operations are done in the following way: 1. Set the length of the cooking perio...
Page 24 - SEMI-AUTOMATIC COOKING; There are two ways to set your oven:
24 SEMI-AUTOMATIC COOKING This is used to automatically switch off the oven after the desired cooking time has elapsed. There are two ways to set your oven: 1. Set the length of the cooking time by pushing the button and the button to advance, or to go backwards if you have passed the desired time (...
Page 25 - CLEANING AND MAINTENANCE; GENERAL ADVICE; and disconnected from the electrical power supply.; Avoid using cleaning products with a chlorine or acidic base.; handling or cleaning of this appliance.; ENAMELLED PARTS; Dry preferably with a microfibre or soft cloth.; PRINTED SURFACES; Clean using an appropriate product.; irreparably damage the surface.
25 CLEANING AND MAINTENANCE GENERAL ADVICE ■ Before you begin cleaning, you must ensure that the appliance is switched off and disconnected from the electrical power supply. ■ It is advisable to clean when the appliance is cold and especially when cleaning the enamelled parts. ■ Avoid leaving alkali...
Page 26 - INSIDE OF OVEN; Do not store flammable material in the oven.; REPLACING THE HALOGEN OVEN LIGHT; the possibility of electric shock.; the following specifications:
26 INSIDE OF OVEN The oven should always be cleaned after use when it has cooled down. The cavity should be cleaned using a mild detergent solution and warm water. Suitable proprietary chemical cleaners may be used after first consulting with the manufacturers recommendations and testing a small sam...
Page 27 - REMOVING AND REPLACING THE INNER DOOR GLASS PANE FOR CLEANING; and instructions very carefully.
27 REMOVING AND REPLACING THE INNER DOOR GLASS PANE FOR CLEANING If you wish to clean the inner pane of glass of the door, make sure you follow the precautions and instructions very carefully. Replacing the glass pane and the door incorrectly may result in damage to the appliance and may void your w...
Page 28 - REMOVING THE OVEN DOOR; Open the door to the full extent (fig.
28 B A C REMOVING THE OVEN DOOR The oven door can easily be removed as follows: ■ Open the door to the full extent (fig. 22a). ■ Open the lever “ A ” completely on the left and right hinges (fig. 22b). ■ Hold the door as shown in fig. 22. ■ Gently close the door until left and right hinge levers “ A...
Page 29 - CLEANING THE PANES OF GLASS; The oven door is fitted with no. 2 panes:; REMOVING THE INNER PANE OF
29 G CLEANING THE PANES OF GLASS The oven door is fitted with no. 2 panes: ■ no. 1 outside; ■ no. 1 inner. To clean the panes on both sides it is necessary to remove the inner pane as follows. REMOVING THE INNER PANE OF GLASS 1. Lock the door open: ■ Open the door to the full extent (fig. 22a). ■ Op...
Page 30 - Replace the inner pane:
30 The oven door has a sealed gasket in the top part. It is normal the opened gap between the top edge of the inner glass and the sealed gasket. This allows the cooling air circulation. REPLACING THE INNER PANE OF GLASS 1. Make sure the door is locked open (see fig. 22c). 2. Replace the inner pane: ...
Page 31 - SERVICE AND MAINTENANCE; SERVICING THE APPLIANCE; Authorised Delonghi Service Agent:; Servicing shall be carried out only by authorized personnel.; TROUBLESHOOTING; nearest Authorised Delonghi Service Agent.
31 SERVICE AND MAINTENANCE SERVICING THE APPLIANCE Service may be obtained by contacting our Customer Service Centre to locate the nearest Authorised Delonghi Service Agent: Servicing shall be carried out only by authorized personnel. The appliance shall not be modified. TROUBLESHOOTING If you exper...