Page 2 - Correct use
Contents Safety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2 Control panel _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 3 Washing programmes _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 4 Use of the appliance _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 5 Setting the water softener _ _ _ _ _ _ _ _ _ _ _ _ _ 5 Use of dishwasher salt _ ...
Page 3 - Control panel
• Do not change the specifications or modify this prod- uct. Risk of injury and damage to the appliance. • Do not use the appliance: – if the mains cable or water hoses are damaged,– if the control panel, worktop or plinth area are dam- aged, that you can get access to the inner side of the applianc...
Page 4 - Washing programmes; Consumption values
Programme knob and on/off indicator light • To set a washing programme, turn the programme knob clockwise or anticlockwise. The programme marker on the programme knob must agree with one of the washing programmes on the control panel.– The on/off indicator light comes on (position ON). • To set the ...
Page 5 - Use of the appliance
Programme Duration (in minutes) Energy (in kWh) Water (in litres) Quick 65° A 30' 30 0,8 8 Economy 50° 120 - 130 0,8 - 0,9 12 - 13 Prewash 11 0,1 5 The pressure and temperature of the water, the var- iations of power supply and the quantity of dishes can change these values. Use of the appliance Ref...
Page 6 - Use of dishwasher salt
Water hardness Water hardness setting °dH °TH mmol/l Clarke manually electronically 51 - 70 91 - 125 9,1 - 12,5 64 - 88 2 10 43 - 50 76 - 90 7,6 - 9,0 53 - 63 2 9 37 - 42 65 - 75 6,5 - 7,5 46 - 52 2 8 29 - 36 51 - 64 5,1 - 6,4 36 - 45 2 7 23 - 28 40 - 50 4,0 - 5,0 28 - 35 2 6 19 - 22 33 - 39 3,3 - 3...
Page 7 - Use of rinse aid
1 2 3 Fill the salt container with 1 litre of water (only the first operation). 4 5 6 It is normal that water overflows from the salt con- tainer when you fill it with salt.Make sure that there is no grain of salt outer of the salt compartment. Salt which stays on the tank for a while drills the tan...
Page 8 - Adjusting the dosage of rinse aid; Loading cutlery and dishes; Helpful hints and tips
Caution! Do not fill the rinse aid dispenser with other products (e.g. dishwasher cleaning agent, liquid detergent). There is a risk of damage to the appliance. Adjusting the dosage of rinse aid The rinse aid dial is set at the factory at position 4. To increase or decrease the dosage refer to 'What...
Page 9 - Adjustment of the height of the upper basket; Use of detergent
1 Arrange the items to let water touch all surfaces. 2 For longer items, fold the cup racks up. Adjustment of the height of the upper basket If you put large plates in the lower basket, first move the upper basket to a upper position. Warning! Adjust the height before you load the upper basket. Maxi...
Page 10 - Use of combi detergent tablets; Setting and starting a washing programme; Interrupting a washing programme
5 6 Different brands of detergent dissolve in different times. Some detergent tablets do not have the best cleaning results during short washing programmes. Use long washing programmes when you use detergent tab- lets to fully remove the detergent. Use of combi detergent tablets These tablets contai...
Page 11 - Care and cleaning; Cleaning the filters
Do not open the door during the countdown to pre- vent interruption of the countdown. When you close the door again, the countdown continues from the point of interruption. Cancelling a delay start:1. Press and hold the start/cancel button until, the start/ cancel indicator light and delay start ind...
Page 12 - What to do if...
External cleaning Clean the external surfaces of the appliance and control panel with a damp soft cloth. Only use neutral detergents. Do not use abrasive products, scouring pads or solvents (acetone, trichloroethylene etc...). Frost precautions Caution! Do not install the appliance where the tempera...
Page 13 - Technical data
Fault code and malfunction Possible cause and solution The programme does not start • The appliance door is not closed. Close the door. • Mains plug is not connected in. Put in the mains. • The fuse has blown out in the household fuse box. Replace the fuse. • Delay start is set. Cancel the delay sta...
Page 14 - Fitting under a counter
Depth cm 60,5 Electrical connection - Voltage - Overall power - Fuse Information on the electrical connection is given on the rating plate on the inner edge of the dishwasher door. Water supply pressure Minimum 0,5 bar (0,05 MPa) Maximum 8 bar (0,8 MPa) Capacity Place settings 9 Environment concerns...
Page 15 - Adjusting the level of the appliance; Water connection; Water inlet hose
3 4 Install the appliance worktop to the appliance if you want to use the dishwasher as a freestanding appliance. The plinth on freestanding appliance is not adjustable. Adjusting the level of the appliance Make sure that the appliance is level to close and seal the door correctly. If the level of t...
Page 16 - Electrical connection
Electrical connection Warning! The manufacturer is not responsible if you do not follow these safety precautions. Ground the appliance according to safety precautions. Make sure that the rated voltage and type of power on the rating plate agree with the voltage and the power of the local power suppl...
