Page 2 - Contents; Guide to use the instruction book
24 For the user Important safety information 25 Description of the appliance 26 The control panel 26 Before use 27 Setting the water softener 27 Rinse aid 29 Using your appliance 30 Loading your appliance 30 Adjusting the height of the upper basket 31 Use of detergent 32 Hints and tips 33 Washing pr...
Page 3 - During Use; Conservation; Important safety information
25 Installation ● This appliance is heavy. Care should be taken when moving it. ● It is dangerous to alter the specifications or attempt to modify this product in any way. ● Care must be taken to ensure that the appliance does not stand on the electrical supply cable. ● Any electrical work required ...
Page 4 - Description of the appliance
26 1. Water hardness adjustment 2. Levelling spacers 3. Upper basket stop 4. Salt container 5. Lower spray arm 6. Detergent dispenser 7. Control panel 8. Rating plate 9. Rinse aid dispenser 10. Large filter 11. Central filter 12. Upper spray arm 13. Upper basket 1. On/Off indicator light 2. On/Off p...
Page 5 - Setting the water softener; To adjust the water softener; Before use
27 Before using your dishwasher for the first time: 1. Ensure that the electrical and water connections comply with the installation instructions 2. Remove all packaging from inside the appliance 3. Set the water softener 4. Pour 1 litre of water inside the salt container and then fill with salt 5. ...
Page 6 - Filling with salt
28 Filling with salt Only use salt specifically designed for use in dishwashers.All other types of salt not specifically designed for use in a dishwasher, especially table salt, will damage the water softener. Only fill with salt just before starting one of the complete washing programmes (not the R...
Page 7 - Rinse aid; Filling with rinse aid; Adjusting the dose
29 Rinse aid Rinse aid is automatically added during the last rinse,ensuring thorough rinsing, and spot and streak freedrying. The dispenser, which is positioned inside thedoor, holds about 110 ml of rinse aid, which issufficient for 16 - 40 dishwashing programmes,depending upon the dosage setting. ...
Page 8 - Using your appliance
30 Loading your appliance Before placing dishes in the machine, remove anyscraps of food, to avoid clogging the filters andconsequently reducing the performance. Do not load very small items which can fall through the baskets. The lower basket The lower basket is designed to take saucepans, lids,pla...
Page 9 - The upper basket
31 The upper basket The upper basket is designed for plates (dessertplates, saucers, dinner plates of up to 24 cm indiameter), salad bowls, cups and glasses. Arrange items on and underneath the fold-down cupracks so that water can reach all surfaces. Light items (plastic bowls etc.) should be loaded...
Page 11 - Hints and tips
33 To save energy Place dishes in the machine immediately after everymeal and wait until the dishwasher is full beforewashing. If necessary run the Rinse and Hold programme (see"Washing Programmes" chart) so that any food scrapsdo not become caked on the dishes while you arewaiting to run th...
Page 12 - Washing programmes
34 Programme Degree of soil and type of load Starting position of the programmer Required pushbuttons Cycle description PRO40en Washing programmes Normal 65°C with prewash Intensive 70°C Rinse and hold Hot prewashMain wash up to 70°C2 cold rinses1 hot rinseDrying Cold prewashMain wash up to 65°C1 co...
Page 13 - Operating sequence
35 1. Check the filters Ensure they are clean and properly positioned (see "Maintenance and cleaning"). 2. Check that there is rinse aid and salt 3. Load the dishes Remove any scraps of food. Pull the lower basket out and arrange the saucepans, plates and cutlery in it. Pull the upper basket...
Page 14 - Cleaning the large filter; Maintenance and cleaning
36 Internal cleaning Ensure that the seals around the door, the detergentand rinse aid dispensers are cleaned regularly with adamp cloth. We recommend every 3 months to run a 65°C washprogramme without dishes using detergent. Cleaning the central filter (After each wash) Scraps of food may accumulat...
Page 15 - Frost precautions
37 External cleaning Clean the external surfaces of the machine andcontrol panel with a damp soft cloth. If necessary useonly neutral detergents. Never use abrasive products,scouring pads or solvent (acetone, trichloroethyleneetc....). Prolonged periods of non-operation If you are not using the mach...
Page 16 - Something not working; Symptom
38 Certain problems are due to lack of simple maintenance or oversights, which can be solved easily withoutcalling out an engineer.Before contacting your local Service Force Centre, please carry out the checks listed below. RIM05en Something not working Symptom Solution The machine will not start ● ...
Page 17 - Inlet hose
39 If after all these checks, the problem persists, contactyour local Service Force Centre, quoting the modeland serial number. This information can be found onthe rating plate located on the right hand side of thedishwasher door (see picture). Service and spare parts This product should be serviced...
Page 18 - Hints for test centres; Technical specifications
40 Hints for test centres Before starting any test it is necessary to fill completely with salt the salt container and with rinse aid the rinseaid dispenser. IST26en Test standard EN 50242 Reference programme: Bio 50°C with prewash Load: 12 standard place settings Rinse aid selector: position 5 Dete...
Page 19 - Water supply connections; Installation instructions
41 Remove all packaging before positioning themachine. If possible, position the machine next to a water tapand a drain. Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person. Any plumbing work required to install this appliance s...
Page 20 - Water outlet hose connection; Electrical connection
42 Water outlet hose connection The end of the drain hose can be connected in thefollowing ways: 1. To the sink outlet siphon, securing it if necessary with a clip. 2. To a stand pipe provided with vent-hole, minimum internal diameter 4 cm. The waste connection must be at a height of between30 cm (m...
Page 22 - Fixing to the adjacent units
44 The furniture door plinth The door on this appliance is designed for the overlayof a door plinth having the following dimensions: Width: 596 mm Height: 50 mm (min) - 120 mm (max) Thickness: 20 mm max The panel height should be no more than indicated,otherwise complete opening of the door will no ...
Page 23 - Kitchen plinth adjustment
45 Kitchen plinth adjustment To allow correct opening of the door it is sometimesnecessary to cut the kitchen plinth. Refer to thecutting table. According to dimensions (a) and (b) as shown on thefigure, you will find on the following table the depth(x) of the cut to be made on the plinth. The dimen...
