Page 2 - Correct use
Contents Safety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2 Control panel _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 3 Washing programmes _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 5 Use of the appliance _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 6 Setting the water softener _ _ _ _ _ _ _ _ _ _ _ _ _ 6 Use of dishwasher salt _ ...
Page 3 - Control panel
• Do not change the specifications or modify this prod- uct. Risk of injury and damage to the appliance. • Do not use the appliance: – if the mains cable or water hoses are damaged,– if the control panel, worktop or plinth area are dam- aged, that you can get access to the inner side of the applianc...
Page 4 - Function buttons
Indicator lights The indicator light comes on when the washing pro- gramme is completed. Auxiliary functions:• Level of the water softener.• Activation/deactivation of the audible signals.• Activation/deactivation of the rinse aid dispenser.• An alarm if the appliance has a malfunction. 1) The indic...
Page 5 - Washing programmes; Consumption values
Washing programmes Washing programmes Programme Degree of soil Type of load Programme description Heavy soil Crockery, cutlery, pots and pans Prewash Main wash up to 70°C 2 intermediate rinses Final rinse Drying 1) Any Crockery, cutlery, pots and pans Prewash Main wash up to 45°C or 70°C 1 or 2 inte...
Page 6 - Manual adjustment
Use of the appliance Refer to the following instructions for each step of pro- cedure:1. Make a check if the water softener level is correct for the water hardness in your area. If necessary set the water softener. 2. Fill the salt container with dishwasher salt.3. Fill the rinse aid dispenser with ...
Page 7 - Electronic adjustment; Use of dishwasher salt
1 2 Set switch to position 1 or 2. Electronic adjustment The water softener is set at the factory at level 5.1. Switch on the appliance.2. Make sure that the appliance is in setting mode.3. Press and hold function buttons B and C until the indicator lights for function buttons A, B and C start to fl...
Page 8 - Use of rinse aid; Adjusting the dosage of rinse aid; Loading cutlery and dishes; Helpful hints and tips
Use of rinse aid Caution! Only use branded rinse aid for dishwashers. Do these steps to fill the rinse aid dispenser: 1 2 3 4 5 Fill when the rinse aid in- dicator (B) becomes clear. Caution! Do not fill the rinse aid dispenser with other products (e.g. dishwasher cleaning agent, liquid detergent). ...
Page 9 - Adjustment of the height of the upper basket
1 Arrange service dishes and large lids around the edge of the lower basket. 2 3 The rows of prongs in the lower basket can be flat to load pots, pans and bowls. 1 2 Use the cutlery grid. If the dimensions of the cutlery prevent use of the cutlery grid, remove it. Put long-bladed knives and long or ...
Page 10 - Use of detergent
1 2 Do these steps to move the upper basket to the upper or lower position:1. Move the front runner stops (A) out.2. Pull the basket out.3. Put the basket in the upper or lower position.4. Replace the front runner stops (A) in their initial po- sition. Caution! If the basket is in the upper position...
Page 11 - Cancelling a washing programme
Multitab function The multitab function is for combi detergent tablets. These tablets contain agents such as detergent, rinse aid and dishwasher salt. Some types of tablets can contain other agents. Do a check if these tablets are applicable for the local water hardness. Refer to the instructions fr...
Page 12 - Care and cleaning
2. Release function buttons B and C to cancel the wash- ing programme. At this time you can do these steps:1. Switch off the appliance.2. Set a new washing programme . Fill the detergent dispenser with detergent before you set a new washing programme. Interrupting a washing programme Open the door.•...
Page 13 - What to do if...
3 To remove filters B and C, turn the handle approxi- mately 1/4 anticlockwise. 4 Remove the flat filter A from the bottom of the ap- pliance. 5 Put the flat filter A in the bottom of the appliance. Install the flat filter cor- rectly under the two guides D. 6 Put the filter system in po- sition. To...
Page 15 - Technical data
The cleaning results are not satisfactory The dishes are not clean • The selected washing programme is not applicable for the type of load and soil. • The baskets are loaded incorrectly so that water cannot reach all surfaces.• Spray arms do not turn freely because of incorrect arrangement of the lo...
Page 16 - Installation; Attaching the appliance to the adjacent units; Water connection; Water inlet hose
Warning! To discard the appliance, follow the procedure: • Pull the mains plug out of the socket.• Cut off the mains cable and mains plug and discard them. • Discard the door catch. This prevents the children to close themselves inside the appliance and endanger their lives. Installation Warning! Ma...
Page 17 - Drain hose; Electrical connection
• Do not put the water inlet hose or the safety valve in water. • If the water inlet hose or the safety valve is damaged, immediately disconnect the mains plug from the mains socket. • Only let the Service Force Centre replace the water inlet hose with safety valve. Drain hose 1 Connect the water dr...
