Page 2 - Content
2 Content Safety information - - - - - - - - - - - - - - - - - -3 Control panel and functions - - - - - - - - - - -4 Audible signals - - - - - - - - - - - - - - - - - - - -6 Programme table - - - - - - - - - - - - - - - - - - -7 Before the first use - - - - - - - - - - - - - - - - -8 Setting the wat...
Page 3 - Safety information; Correct use; Child safety
3 Safety information Correct use ● This dishwasher is only intended for washinghousehold utensils suitable for machinewashing. ● Do not put any solvents in the dishwasher.This could cause an explosion. ● Knives and other items with sharp pointsmust be loaded in the cutlery basket withtheir points do...
Page 4 - Control panel and functions
4 Control panel and functions Programme/Cancel button On-Off button End of cycle light In this fully integrated appliance the controls are located on the top of the door. When selecting awashing programme, the door needs to be slightly open. ● Never use the dishwasher if the electricalsupply cable a...
Page 6 - Audible signals; Deactivation/activation of the audible signals
6 Audible signals Audible signals have been introduced to helpindicate which operations the dishwasher isperforming.- end of the washing programme,- malfunction of the appliance. Factory setting: audible signals activated. Deactivation/activation of the audible signals 2. Press and hold Programme/Ca...
Page 7 - Programme table
7 Programme table Programme Use Cycle description 70° INTENSIVE Normal soil. Prewash - Main wash Crockery, cutlery, pots and pans 2 intermediate rinses - Final rinseDry 50° BIO Normal soil. Prewash - Main wash Crockery and cutlery 1 intermediate rinse - Final rinseDry 65° NORMAL Normal soil Prewash ...
Page 8 - Before the first use; Setting the water softener
8 Before the first use When using separate special(dishwasher) salt, rinse aid anddetergent: - set the water softener- add special salt- fill up with rinse aid When using tablets that integraterinse aid and detergent: there is no need to fill up with rinse aid- set the water softener- add special (d...
Page 9 - Setting the water softener manually (see table)
9 Water hardness Number of flashes of the Adjustment of the water “end of programme” light hardness setting in Clarke 1) in °TH 2) in mmol/l 3) manually electronically 64 - 88 91 - 125 9,0 - 12,5 10 2 level 10 53 - 63 76 - 90 7,6 - 8,9 9 2 level 9 46 - 52 65 - 75 6,5 - 7,5 8 2 level 8 36 - 45 51 - 6...
Page 10 - Setting the water softener electronically (see table)
10 Setting the water softener electronically (see table) The water softener is factory set at position 5. The dishwasher mustbe switched off.Switch on thedishwasher by pressingthe On-Off button. The End of cycle light might flash 5 times, forexample. The flashing isrepeated every 5seconds. To change...
Page 11 - Filling with dishwasher salt
11 Filling with dishwasher salt Only before filling withsalt for the first time , fill the salt containerwith water Using the funnelprovided, pour in thesalt until the container isfilled with salt. Remove any trace ofsalt. Replace the cap tightlyturning it clockwise untilit stops with a click. CAUTI...
Page 12 - Filling with rinse aid; Adjusting the dosage of rinse aid
Filling with rinse aid 12 Open the lid. Fill up with rinse aid.The maximum level forfilling is indicated by " max " . Clean up any rinse aidwhich overflows. Closethe lid and press until itlocks. CAUTION! Never fill the rinse aid dispenser with any othersubstances (e.g. dishwasher cleaning ag...
Page 13 - Loading cutlery and dishes
13 Loading cutlery and dishes ● The following items are not suitable for use in the dishwasher:- Cutlery with wooden, horn, china or mother-of-pearl handles - Plastic items that are not heat resistant- Older cutlery with glued parts that are not temperature resistant - Bonded cutlery items or dishes...
Page 14 - Adjusting the height of the upper basket
14 Load upper basket.Light items (plasticbowls etc.) must beloaded in the upperbasket and arranged sothey do not move. For taller items, the cupracks can be foldedupwards. If plates are to be loaded in the upperbasket: load them starting from the rear positions;tilting them slightly forwards and avo...
Page 16 - Cleaning and Care; Cleaning the filters
16 Cleaning and Care IMPORTANT! NEVER use the dishwasher without filters.Incorrect repositioning and fitting of the filters will produce poor washing results. Cleaning the filters IMPORTANT!NEVER try to remove the spray arms. If residues of soil have clogged the holes in theupper spray arm, remove t...
Page 17 - Environmental concerns
17 Environmental concerns External cleaning Clean the external surfaces of the machine andcontrol panel with a damp soft cloth. Ifnecessary use only neutral detergents. Neveruse abrasive products, scouring pads orsolvent (acetone, trichloroethylene etc....). Ensure that the seals around the door, th...
Page 18 - Something not working
18 Fault code / malfunction Possible cause Solution Something not working The dishwasher does not fill withwater. - continuous flashing of the start/cancel indicator light - 1 intermittent audible signal - 1 flash of the " end of cycle " indicator light The dishwasher will not drain. - conti...
Page 19 - The wash results are not satisfactory
19 The wash results are not satisfactory The dishes are not clean ● The wrong washing programme has been selected. ● The dishes were arranged in such a way as to stop water reaching all parts of the surface. The baskets must not be overloaded. ● The spray arm do not rotate freely due to incorrect ar...
Page 21 - Hints for test institutes
21 Hints for test institutes Testing in accordance with EN 60704 must be carried out with appliance fully loaded andusing the test programme (see "Consumptionvalues"). Test in accordance with EN 50242 must be carried out when the salt container and rinseaid dispenser have been filled with sa...
Page 22 - Installation; Water connection
22 CAUTION! If the machine is connected to new pipes or pipes which have not been used for a long time, youshould run the water for a few minutes before connecting the inlet hose. Inlet hose Connect the inlet hose to a water tap with anexternal thread of 3/4”.The inlet hose can be turned either to t...
Page 23 - Electrical connection
23 Ensure that the hosesare not kinked, crushedor entangled. CAUTION! Always be sure, that there is no water leakagefrom hoses and their connections after theinstallation. WARNING! Multi-way plugs, connectors and extensioncables must not be used. This could constitutea fire hazard through overheatin...
Page 25 - Service and spare parts
25 Service and spare parts In the event of your appliance requiringservice, or if you wish to purchase spare partsplease contact your local Service Force Centreby telephoning: 08705 929929 Your telephone call will be automatically routedto the Service Force Centre covering your postcode area. For th...
Page 26 - Guarantee conditions; Standard Guarantee Conditions; Exclusions
26 Guarantee conditions Standard Guarantee Conditions We, Zanussi-Electrolux, undertake that if within12 months of the date of purchase thisZANUSSI-ELECTROLUX appliance or any partthereof is proved to be defective by reasononly of faulty workmanship or materials, wewill, at our option repair or repl...
Page 27 - European guarantee
27 This appliance is guaranteed by Electrolux, ineach of the countries listed in the followingpage, for the period specified in the applianceguarantee or otherwise by law. If you movefrom one of these countries to another of thesecountries the appliance guarantee will movewith you subject to the fol...
Page 29 - Notes
29 Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....
