Zanussi ZDT13010FA- User Manual

Page 3 - SAFETY INSTRUCTIONS

been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. • Do not let children play with the appliance. • Keep all detergents away from children. • Keep children and pets away from the appliance door when it is open. • Cleaning and user...

Page 5 - EASY START; PROGRAMMES

EASY START 4 5 3 2 1 1 On/off button 2 Programme indicators 3 Indicators 4 Programme button 5 Delay button INDICATORS Washing phase. It comes on when the washing phase operates.End indicator.Salt indicator. It is always off while the programme operates. PROGRAMMES Programme Degree of soil Type of lo...

Page 6 - SETTINGS

Programme Degree of soil Type of load Programme phases Consumption values 1) Duration (min) Energy (kWh) Water (l) Normal or light soil Delicate crock- ery and glass- ware • Wash 45 °C • Rinses • Dry 70 - 80 0.7 - 0.9 13 - 14 1) The pressure and the temperature of the water, the variations of the ma...

Page 8 - BEFORE FIRST USE

German degrees (°dH) French degrees (°fH) mmol/l Clarke degrees Water softener level 11 - 14 19 - 25 1.9 - 2.5 13 - 17 3 4 - 10 7 - 18 0.7 - 1.8 5 - 12 2 <4 <7 <0.7 < 5 1 2) 1) Factory setting 2) Do not use salt at this level. ACTIVATING THE ACOUSTIC SIGNAL FOR THE END OF PROGRAMME By de...

Page 9 - DAILY USE

ADDING SALT Before first use put one litre of water in the salt container.Water and salt can come out from the salt container when you fill it. Risk of corrosion. To prevent it, after you fill the salt container, start a programme. ADDING RINSE AID 2 1 1 2 3 4 2 1 The rinse aid helps to dry the dish...

Page 11 - HINTS AND TIPS

END OF THE PROGRAMME • Press the on/off button to deactivate the appliance. • Close the water tap. If you do not press the on/off button, after few minutes from the end of the programme all the indicators go off. This helps to decrease the energy consumption. HINTS AND TIPS GENERALThe following hint...

Page 12 - CARE AND CLEANING

3. Start the shortest programme with a rinsing phase. Do not add detergent and do not load the baskets. 4. When the programme is completed, adjust the water softener according to the water hardness in your area. 5. Adjust the released quantity of rinse aid. LOADING THE BASKETS• Only use the applianc...

Page 13 - TROUBLESHOOTING

• Make sure that there are no residues of food or soil in or around the edge of the sump. • Put back in place the flat filter (C). Make sure that it is correctly positioned under the 2 guides. • Reassemble the filters (A) and (B). • Put back the filter (A) in the flat filter (C). Turn it clockwise u...

Page 14 - TECHNICAL INFORMATION

Problem and alarm code Possible solution The appliance does not drain the water. • The end indicator flashes 2 times inter- mittently. • Acoustic signal sounds 2 times inter- mittently. • Make sure that the sink spigot is not clogged. • Make sure that the drain hose has no kinks or bends. The anti-f...

Page 15 - ENVIRONMENTAL CONCERNS

Power consumption Off-mode (W) 0.50 1) Refer to the rating plate for other values. 2) f the hot water comes from alternative source of energy, (e.g. solar panels, aeolian energy), use the hot water supply to decrease energy consumption. RATING PLATE Mod. ... ... ...Prod. No. ... ... ... Ser. No. ......

Zanussi ZDT13010FA- User Manual

Table of Contents:

Summary

Other Zanussi Models