Zanussi ZDT24001FA User Manual

Page 3 - SAFETY INSTRUCTIONS

• Do not keep the appliance door open without supervision to prevent to fall on it. • Before maintenance, deactivate the appliance and disconnect the mains plug from the mains socket. • Do not use water spray and steam to clean the appliance. • The ventilation openings in the base (if applicable) mu...

Page 5 - EASY START; PROGRAMMES

EASY START 1 2 3 4 1 On/off button 2 Programme buttons 3 Delay button 4 Indicators INDICATORS Indicator Description End indicator. Multitab indicator. Salt indicator. It is always off while the programme operates. PROGRAMMES Programme Degree of soil Type of load Programme phases Consumption values 1...

Page 6 - SETTINGS

Programme Degree of soil Type of load Programme phases Consumption values 1) Duration (min) Energy (kWh) Water (l) 4) Heavy soil Crockery, cut- lery, pots and pans • Prewash • Wash 70 °C • Rinses • Dry 150 - 170 1.5 - 1.6 13 - 15 5) Fresh soil Crockery and cutlery • Wash 60 °C or 65 °C • Rinses 30 0...

Page 9 - BEFORE FIRST USE

DEACTIVATING THE RINSE AID DISPENSER While the appliance is in user mode:1. Press . • The indicators and goes off. • The indicator starts to flash. • The end indicator indicates the current setting: End indicator on = rinse aid dispenser activated. 2. Press to change the setting. End indicator off =...

Page 10 - DAILY USE

ADDING RINSE AID 2 1 4 3 2 1 A The rinse aid helps to dry the dishes without streaks and stains. It is automatically released during the hot rinse phase. Fill the rinse aid dispenser when the indicator (A) becomes clear. DAILY USE 1. Open the water tap. 2. Press the on/off button to activate the app...

Page 12 - HINTS AND TIPS

With the use of this option the programme duration is prolonged to increase the cleaning and drying results with the use of multi-tablets. Opening the door while the appliance operatesIf you open the door while a programme is running, the appliance stops. When you close the door, the appliance conti...

Page 13 - CARE AND CLEANING

the tableware, we recommend that you use the tablets with long programmes. • Do not use more than the correct quantity of detergent. Refer to the instructions on the detergent packaging. WHAT TO DO IF YOU WANT TO STOP USING MULTI-TABLETSBefore you start to use separately detergent, salt and rinse ai...

Page 14 - TROUBLESHOOTING

C • Make sure that there are no residues of food or soil in or around the edge of the sump. • Put back in place the flat filter (C). Make sure that it is correctly positioned under the 2 guides. • Reassemble the filters (A) and (B). • Put back the filter (A) in the flat filter (C). Turn it clockwise...

Page 17 - TECHNICAL INFORMATION

Problem Possible cause and solution Unusual foam during washing. • Use the detergent for dishwashers only. • There is a leak in the rinse aid dispenser. Contact an Author- ised Service Centre. Traces of rust on cutlery. • There is too much salt in the water used for washing. Refer to "The water ...

Page 18 - ENVIRONMENT CONCERNS

RATING PLATE Mod. ... ... ...Prod. No. ... ... ... Ser. No. ... INFORMATION FOR TEST INSTITUTESFor all the necessary information for test performance, send an email to:[email protected]Write down the product number (PNC) that is on the rating plate. ENVIRONMENT CONCERNS Recycle the materials with th...