Page 2 - Contents
Thank you for selecting ourappliance We wish you lots of enjoyment with your newappliance and we hope that you will considerour brand again when purchasing householdappliances.Please read this user manual carefully andkeep it throughout the product life cycle as areference document. The user manual ...
Page 3 - Safety information; Correct use
Safety information In the interest of your safety and to ensure thecorrect use, before installing and first using theappliance, read this user manual carefully, in-cluding its hints and warnings. To avoidunnecessary mistakes and accidents, it is im-portant to ensure that all people using theapplianc...
Page 4 - Installation; Control panel
Installation • Check your dishwasher for any transport damage. Never connect a damaged ma-chine. If your dishwasher is damaged con-tact your supplier. • All packaging must be removed before use.• Any electrical and plumbing work required to install this appliance must be carried out bya qualified an...
Page 6 - Washing programmes
Indicator lights Wash indicator light Illuminates when the washing and rinsing phases arerunning. Dry indicator light Illuminates when the drying phase is running. End of programme indicator light Illuminates when the washing programme has ended.Switch off the dishwasher by returning the programmese...
Page 7 - First use
Programme Degree of soil Type of load Programme description BIO 50° 2) Normal soil Crockery and cutlery PrewashMain wash1 intermediate rinseFinal rinseDrying Rinse and Hold Any.Partial load (to be completed later in the day). 1 cold rinse (to avoid foodscraps from stickingtogether).This programme do...
Page 8 - Set the water softener
If you decide in future to use separated deter-gents, we advise that you:– Fill up the salt and rinse aid container.– Adjust the water hardness setting to the highest level and perform 1 normal washingprogramme without loading any dishes. – Adjust the water hardness setting according to the hardness...
Page 9 - Filling with dishwasher salt
Setting the water softener manually (see table) Set switch to position 1 or2 The water softener is factory set at position 2. Setting the water softener electronically (see table) The water softener is factory set at position 5.The dishwasher must be switched off . Press and hold the start/cancel bu...
Page 12 - Loading cutlery and dishes
Open the lid. Set the dosage level. (Thedose is factory set in po-sition 4). Close the lid and press un-til it locks. Loading cutlery and dishes Sponges, household cloths and any object thatcan absorb water may not be washed in thedishwasher.• Before loading the dishes, you should: – Remove all left...
Page 15 - Use of detergent; Detergent tablets; Unloading the dishwasher
Use of detergent IMPORTANT! Only use detergents suitable for dishwashers. Observe the manufacturer’s dosing and stor-age recommendations. Open the lid. Fill in the detergent incompartment A . Observe the dosing lev-els. For programmes with pre-wash add an additionaldetergent dose in com-partment B ....
Page 16 - Care and cleaning; Cleaning the filters
• Water may appear on the sides and the door of the dishwasher as the stainless steel willeventually become cooler than the dishes. CAUTION! When the washing programme has finished, itis recommended that the dishwasher is un-plugged and the water tap turned off. Care and cleaning Cleaning the filter...
Page 17 - Environmental concerns
Cleaning the spray arms NEVER try to remove the spray arms. If residues of soil have clogged the holes in thespray arms, remove them with a cocktail stick. External cleaning Clean the external surfaces of the machine andcontrol panel with a damp soft cloth. Ifnecessary use only neutral detergents. N...
Page 18 - Something not working
CAUTION! When a unit is no longer being used:• Pull the plug out of the socket.• Cut off the cable and plug and dispose of them. • Dispose of the door catch. This prevents children from trapping themselves insideand endangering their lives. The symbol on the product or on its pack-aging indicates th...
Page 20 - Technical data
The wash results are not satisfactory The dishes are not clean • The wrong washing programme has been selected.• The dishes are arranged in such a way as to stop water reaching all parts of the surface. The basketsmust not be overloaded. • The spray arms do not rotate freely due to incorrect arrange...
Page 21 - Hints for test institutes
Noise level dB(A) 51 Consumption values The consumption values are intended as aguide and depends on the pressure and thetemperature of the water and also by the var- iations of the power supply and the amount ofdishes. Consumption values Programme Programme duration (in minutes) Energy consumption ...
Page 22 - Water connection
Upper basket Cutlery basket Lower basket cup racks: position A Installation WARNING! Any electrical and/or plumbing work required toinstall this appliance should be carried out by aqualified electrician and/or plumber or compe-tent person. Water connection WARNING! The dishwasher must not be connect...
Page 23 - Drain hose
If the water inlet hose leaks, the safety valvecuts off the water supply. WARNING! The electrical cable for the safety valve is in thedouble-walled water inlet hose and is live. Therefore do not immerse the water inlet hoseor the safety valve in water.Take care when installing the water inlet hose. ...
