WEN BG4260 - User Manual - manualsarea.com

Page 2 - CONTENTS; WELCOME 3; To purchase accessories for your tool, visit

2 CONTENTS WELCOME 3 Introduction ..................................................................................................... 3Specifications ................................................................................................... 3 SAFETY 4 General Safety Rules ...................

Page 3 - INTRODUCTION; safety for both yourself and others.; SPECIFICATIONS

INTRODUCTION Thanks for purchasing the WEN Bench Grinder. We know you are excited to put your tool to work, but first, please take a moment to read through the manual. Safe operation of this tool requires that you read and understand this operator’s manual and all the labels affixed to the tool. Thi...

Page 4 - GENERAL SAFETY RULES; WORK AREA SAFETY

GENERAL SAFETY RULES 4 5 WORK AREA SAFETY 1. Keep work area clean and well lit. Cluttered or dark areas invite accidents. 2. Do not operate power tools in explosive atmo- spheres, such as in the presence of flammable liq- uids, gases or dust. Power tools create sparks which may ignite the dust or fu...

Page 5 - POWER TOOL USE AND CARE

GENERAL SAFETY RULES 4 5 7. If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards. POWER TOOL USE AND CARE 1. Do not force the power tool. Use the correct power too...

Page 6 - SPECIFIC RULES FOR YOUR BENCH GRINDER

BENCH GRINDER SAFETY 1. This bench grinder is designed for sharpening and honing cutting tools, using the appropriate accessories. Using the machine for any other purpose for which it is not designed may result in serious injuries, machine damage and voiding of the warranty. 2. Grinding wheel safety...

Page 7 - GROUNDING INSTRUCTIONS; In the event of a malfunction or breakdown

3. Only grind on the face of the grinding wheel. Do not grind on the side of the wheel. 4. Keep clear of moving parts. Keep arms, hands and other vital appendages away from the grinding and hon- ing wheel. Do not reach behind or beneath the rotating wheel. Avoid awkward operation and hand positions....

Page 8 - UNPACKING; PACKING LIST; UNPACKING & TRANSPORTATION; TRANSPORTING; AMPERAGE; GUIDELINES AND RECOMMENDATIONS FOR EXTENSION CORDS; ELECTRICAL INFORMATION

UNPACKING With the help of a friend or trustworthy foe, carefully remove the bench grinder from the packaging. Make sure to take out all contents and accessories. Do not discard the packaging until everything is removed. Check the packing list below to make sure you have all of the parts and accesso...

Page 9 - KNOW YOUR BENCH GRINDER; TOOL PURPOSE

9 KNOW YOUR BENCH GRINDER TOOL PURPOSE This bench grinder features two 6-inch grinding wheels for sharpening dull blades, wood chisels, knives, scis- sors, carving tools, axes and more. Refer to the following diagrams to become familiarized with all the parts and controls of your bench grinder. The ...

Page 10 - POSITIONING THE MACHINE; ASSEMBLY & ADJUSTMENTS

POSITIONING THE MACHINE Place the machine on a stable, flat work surface. The ma- chine has four rubber feet pre-installed to increase stability and reduce vibration. Make sure there is sufficient open space around the machine. Route the power cord so that it will not make contact with the bench gri...

Page 11 - MOUNTING YOUR BENCH GRINDER; PERSONAL PROTECTION; BASIC OPERATION NOTES; general purpose; OPERATION

ASSEMBLY & ADJUSTMENTS 11 MOUNTING YOUR BENCH GRINDER The bench grinder should be firmly attached to a reliable work surface using mounting hardware (not included) through the base of the grinder’s mounting holes. This will prevent the bench grinder from vibration, walking, or tipping during ope...

Page 12 - SHARPENING KNIVES; TROUBLESHOOTING GUIDE; PROBLEM

12 SHARPENING SCISSORS If possible, take the scissors apart to make the sharp- ening operation easier and safer. Remove material only from the outside surface and work from the heavy end of the blade toward the tip. SHARPENING SCREWDRIVERS The end of a properly sharpened screwdriver will be a perfec...

Page 13 - ROUTINE INSPECTION; MAINTENANCE

13 TROUBLESHOOTING GUIDE PROBLEM POSSIBLE CAUSE SOLUTION Motor overheats. 1. Motor overloaded. 1. Reduce load on motor – reduce pressure on workpiece. 2. Extension cord too long, or of insufficient gauge. 2. Utilize an extension cord of appropriate gauge and length, or plug tool directly into outlet...

Page 14 - To replace a grinding wheel:; LUBRICATION; Using a dressing stone with a coarse/smooth face:; REPLACING THE GRINDING WHEEL; Please recycle the packaging and; PRODUCT DISPOSAL

To replace a grinding wheel: 1. Turn OFF and disconnect the bench grinder from the power supply. 2. Use a Phillips-head screwdriver (not included) to loosen the three screws on the grinding wheel cover and remove it. 3. Hold the grinding wheel to prevent it from rotating. Remove the lock nut with a ...

Page 15 - EXPLODED VIEW & PARTS LIST

Page 16 - Description

EXPLODED VIEW & PARTS LIST 16 No. Part No. Description Qty. 1 4276-001 Bolt, M6x30 2 2 4276-002 Spring Washer, 6mm 2 3 4276-003 Flat Washer, 6mm 2 4 4276-004 Left Eye Shield Bracket 1 5 4276-046 Left Eye Shield Assembly 1 6 4276-006 Tool Rest Lock Knob (M6) 2 7 4276-007 Left Work Rest 1 8 4276-0...

Page 17 - WARRANTY

WARRANTY 17 WEN Products is committed to building tools that are dependable for years. Our warranties are consistent with this commitment and our dedication to quality. LIMITED WARRANTY OF WEN PRODUCTS FOR HOME USE GREAT LAKES TECHNOLOGIES, LLC (“Seller”) warrants to the original purchaser only, tha...

Page 18 - NOTES