WEN 6321 - User Manual

WEN 6321

WEN 6321 Grinding Machine – User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12
Page: / 12

Table of Contents:

  • Page 2 – TABLE OF CONTENTS; Technical Data; TECHNICAL DATA; Maintenance
  • Page 3 – GENERAL SAFETY RULES; DO NOT FORCE THE TOOL to do a job for which it was not designed.
  • Page 5 – SPECIFIC RULES FOR THE SANDER; Always hold the tool firmly with both hands for maximum control.; ELECTRICAL INFORMATION; GROUNDING INSTRUCTIONS
  • Page 6 – GUIDELINES FOR USING EXTENSION CORDS
  • Page 7 – REMOVING OR INSTALLING ABRASIVE BELT
  • Page 8 – ASSEMBLY AND ADJUSTMENTS; ADJUSTING BELT TRACKING; The belt life will be increased by using the tracking adjustment.; OPERATION; SWITCH; cause of the risk of fire from flying sparks.
  • Page 9 – TOOL LUBRICATION
  • Page 10 – EXPLODED VIEW AND PARTS LIST
  • Page 11 – Description
  • Page 12 – LIMITED TWO YEAR WARRANTY
Loading the manual

Model # 6321

3 X 21 INCH

BELT SANDER

bit.ly/wenvideo

Your new tool has been engineered and manufactured to WEN’s highest standards for dependability,

ease of operation, and operator safety. When properly cared for, this product will supply you years

of rugged, trouble-free performance. Pay close attention to the rules for safe operation, warnings,

and cautions. If you use your tool properly and for intended purpose, you will enjoy years of safe,

reliable service.

IMPORTANT:

NEED HELP? CONTACT US!

Have product questions? Need technical support?

Please feel free to contact us at:

800-232-1195

[email protected]

WENPRODUCTS.COM

(M-F 8AM-5PM CST)

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - TABLE OF CONTENTS; Technical Data; TECHNICAL DATA; Maintenance

TABLE OF CONTENTS Technical Data 234577891012 General Safety RulesSpecific Safety Rules For SanderElectrical InformationKnow Your SanderAssembly and Adjustments Operation Exploded View and Parts ListWarranty TECHNICAL DATA Model Number:Motor:Speed:Belt Size:Weight: 6321 120 V, 60 Hz, 7A 820 feet per...

Page 3 - GENERAL SAFETY RULES; DO NOT FORCE THE TOOL to do a job for which it was not designed.

3 GENERAL SAFETY RULES Safety is a combination of common sense, staying alert and knowing how your item works. SAVE THESE SAFE- TY INSTRUCTIONS. WARNING: To avoid mistakes and serious injury, do not plug in your tool until the following steps have been read and understood. 1. READ and become familia...

Page 5 - SPECIFIC RULES FOR THE SANDER; Always hold the tool firmly with both hands for maximum control.; ELECTRICAL INFORMATION; GROUNDING INSTRUCTIONS

5 SPECIFIC RULES FOR THE SANDER 7. Unplug the tool before changing accessories. Accidental start-ups may occur if the tool is plugged in during an accessory change. Before plugging the tool back in, check that the trigger is OFF. 8. After changing sanderpaper, rotate the sanderpaper to make sure the...

Other WEN Grinding Machines Models

All WEN Grinding Machines