WEN 6524 - User Manual

WEN 6524

WEN 6524 Grinding Machine – User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12
13 Page 13
14 Page 14
15 Page 15
16 Page 16
17 Page 17
18 Page 18
19 Page 19
20 Page 20
Page: / 20

Table of Contents:

  • Page 2 – TABLE OF CONTENTS; Technical Data; TECHNICAL DATA; Troubleshooting
  • Page 3 – GENERAL SAFETY RULES; DO NOT FORCE THE TOOL to do a job for which it was not designed.
  • Page 5 – GROUNDING INSTRUCTIONS
  • Page 6 – GUIDELINES FOR EXTENSION CORDS; AMPERAGE; ELECTRICAL INFORMATION
  • Page 7 – KNOW YOUR BELT & SPINDLE SANDER; UNPACKING; sleeve fits directly on the spindle.
  • Page 8 – ASSEMBLY; source outlet before making any adjustments.; MOUNTING THE UNIT
  • Page 9 – OPERATION; This machine creates a lot; INITIAL TEST RUN; Clear all setup tools away from the machine.
  • Page 10 – Disconnect the machine from the power source.
  • Page 11 – CHANGING/REPLACING SANDING DRUMS AND SLEEVES; Unplug the sander from the power source.; BELT SANDING STRAIGHT LINES
  • Page 12 – BELT SANDING OUTSIDE CURVES; Set table tilt to 0° and remove the work stop.; CHANGING SANDING BELTS; Belt Rotation
  • Page 13 – ADJUST THE TRACKING OF THE SANDING BELT; Unplug the sander from its power source.; OVERLOAD PROTECTION
  • Page 14 – MAINTENANCE; adjusting or performing maintenance on the belt/spindle sander.
  • Page 15 – TROUBLESHOOTING
  • Page 16 – EXPLODED VIEW AND PARTS LIST; Description
  • Page 19 – LIMITED TWO YEAR WARRANTY
Loading the manual

Model # 6524

OSCILLATING BELT &

SPINDLE SANDER

bit.ly/wenvideo

Your new tool has been engineered and manufactured to WEN’s highest standards for dependability,

ease of operation, and operator safety. When properly cared for, this product will supply you years

of rugged, trouble-free performance. Pay close attention to the rules for safe operation, warnings,

and cautions. If you use your tool properly and for intended purpose, you will enjoy years of safe,

reliable service.

IMPORTANT:

NEED HELP? CONTACT US!

Have product questions? Need technical support?

Please feel free to contact us at:

800-232-1195

[email protected]

WENPRODUCTS.COM

(M-F 8AM-5PM CST)

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - TABLE OF CONTENTS; Technical Data; TECHNICAL DATA; Troubleshooting

TABLE OF CONTENTS Technical Data 234578914151618 General Safety RulesSpecific Safety Rules For the SanderElectrical InformationKnow Your SanderAssembly TECHNICAL DATA Model Number:Motor:Belt Speed:Spindle Speed:Oscillations:Spindle Travel:Table Tilt:Sanding Drum Sizes:Sanding Sleeve Sizes:Dust Port:...

Page 3 - GENERAL SAFETY RULES; DO NOT FORCE THE TOOL to do a job for which it was not designed.

3 GENERAL SAFETY RULES Safety is a combination of common sense, staying alert and knowing how your item works. SAVE THESE SAFE- TY INSTRUCTIONS. WARNING: To avoid mistakes and serious injury, do not plug in your tool until the following steps have been read and understood. 1. READ and become familia...

Page 5 - GROUNDING INSTRUCTIONS

5 SPECIFIC RULES FOR THE BELT & SPINDLE SANDER 10. Replace worn or damaged belts before operation. Always unplug the unit before making adjustments or chang-ing sandpaper or drums. 11. When sanding a large workpiece, provide additional support. Do not sand with the workpiece unsupported. 12. Ins...

Other WEN Grinding Machines Models

All WEN Grinding Machines