WEN 61721 - User Manual
WEN 61721 Nailer – User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – GENERAL SAFETY RULES
- Page 4 – SAFETY RULES; SAVE THESE
- Page 8 – OPERATION
- Page 9 – CLEAN AND INSPECT DAILY; MAINTENANCE
- Page 10 – EXPLODED VIEW AND PARTS LIST
- Page 12 – TROUBLESHOOTING; Problem
- Page 13 – LIMITED TWO YEAR WARRANTY
- Page 14 – THANKS FOR REMEMBERING
Model # 61721
18-GAUGE 2-INCH
BRAD NAILER
bit.ly/wenvideo
Your new tool has been engineered and manufactured to WEN’s highest standards for dependability,
ease of operation, and operator safety. When properly cared for, this product will supply you years
of rugged, trouble-free performance. Pay close attention to the rules for safe operation, warnings,
and cautions. If you use your tool properly and for intended purpose, you will enjoy years of safe,
reliable service.
IMPORTANT:
NEED HELP? CONTACT US!
Have product questions? Need technical support?
Please feel free to contact us at:
800-232-1195
WENPRODUCTS.COM
(M-F 8AM-5PM CST)
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
3 GENERAL SAFETY RULES Hello! The purpose of the following safety symbols is to attract your attention to possible dangers. We don’t want any of our beloved WEN customers accidentally injuring themselves. The safety symbols and explanations with them deserve your careful attention and understanding....
4 SAFETY RULES Safety is a combination of common sense, staying alert and knowing how your item works. SAVE THESE SAFETY INSTRUCTIONS. WARNING: To avoid mistakes and serious injury, do not use your tool until the following steps have been read and understood 1. READ and become familiar with this ent...
CONNECTING THE TOOL TO AN AIR SUPPLY NOTE: Make sure that the tip of the nailer is pointed away from you when connecting to an air supply. Do not operate when the air pressure is outside of the recommended range (60 to 115 PSI). 1. Determine if the tool needs oil and, if necessary, place 4 to 5 drop...
