Stamina 15-4545 - Manual - manualsarea.com

Page 2 - TABLE OF CONTENTS; SAFETY INSTRUCTIONS

TABLE OF CONTENTS Safety Instructions 2 Before You Begin 4 Equipment Warning & Notice Labels 5 Hardware Identification Chart 6 Assembly Instructions 7 Set Up Instructions 11 Operational Instructions 12 Storage 14 Maintenance 14 Conditioning Guidelines 15 Warm-up and Cool-Down 16 Warranty 17 Prod...

Page 3 - THANK YOU FOR PURCHASING THE; CALL US FIRST; Customer Service

THANK YOU FOR PURCHASING THE Magnetic Fusion 4545 Bike To help you get started, we have pre-assembled most of your Magnetic Fusion 4545 Bike at the factory with the exception of those few parts left unassembled for shipping purposes. Simply follow the few assembly instructions set forth in this manu...

Page 4 - BEFORE YOU BEGIN; Thank you for choosing the

BEFORE YOU BEGIN 4 Seat Rear Stabilizer Wheel Crank Right Cover Back Cushion Leveling Cap Seat Frame Handrail Right Pedal Left Pedal Front Stabilizer Front Frame Meter THE FOLLOWING TOOLS ARE INCLUDED FOR ASSEMBLY : Wrench Allen Wrench (6mm) Warning Label Thank you for choosing the Magnetic Fusion 4...

Page 5 - EQUIPMENT WARNING & NOTICE LABELS; Label is larger than actual size

EQUIPMENT WARNING & NOTICE LABELS This chart is provided to help identify the warning & notice labels on the Magnetic Fusion 4545 Bike. Please take a moment to familiarize yourself with all of the warning & notice labels. Label is larger than actual size WARNING LABEL(85) W1 5

Page 6 - H A RDWA R E I D E N T I F I C AT I O N C H A RT; INCHES; Part No. and Description

H A RDWA R E I D E N T I F I C AT I O N C H A RT This chart is provided to help identify the hardware used in the assembly process. Place the washers or theends of the bolts or screws on the circles to check for the correct diameter. Use the small scale to check thelength of the bolts and screws. NO...

Page 7 - ASSEMBLY INSTRUCTIONS; Screw the; REAR

ASSEMBLY INSTRUCTIONS 7 STEP 1 Attach the FRONT STABILIZER(2), the short one with the WHEELS(52), to the front of the FRONT FRAME(1) with CARRIAGE BOLTS(M8x1.25x75mm)(57), ARC WASHERS(M8)(77), LOCK WASHERS(M8)(80), and ACORN NUTS(M8x1.25)(75). Place all parts from the box in a cleared area and posit...

Page 8 - CARRIAGE BOLTS

ASSEMBLY INSTRUCTIONS 8 STEP 4 Refer to illustration A. Attach the HANDRAIL(6) to the SEAT FRAME(5) with CARRIAGE BOLTS (M8x1.25x45mm)(56), ARC WASHERS(M8)(77), LOCK WASHERS(M8)(80), and ACORN NUTS(M8x1.25) (75). STEP 5 Refer to illustration B. Slide the SEAT FRAME(5) onto the REAR FRAME(3) and lock...

Page 9 - LEFT

ASSEMBLY INSTRUCTIONS 9 STEP 6 Refer to the inset drawing. Plug the LEFT and RIGHT PULSE SENSOR WIRES(39, 40) into the REAR EXTENSION WIRE(38) located on the REAR FRAME(3). Push the plugs, only the plugs, back into the opening in the REAR FRAME(3). Press the SQUARE PLUG(46) into the slot in the back...

Page 10 - EXTENSION WIRE

ASSEMBLY INSTRUCTIONS 10 STEP 8 NOTE: The RIGHT PEDAL(36) has R stamped on the end of the pedal shaft. The RIGHT PEDAL(36) has right hand threads and is tightened by turning clockwise. The LEFT PEDAL(35) has L stamped on the end of the pedal shaft. The LEFT PEDAL(35) has left hand threads and is tig...

Page 11 - SET UP INSTRUCTIONS; Magnetic; To level the; FRONT; all the way up into the; UP

11 SET UP INSTRUCTIONS Place the Magnetic Fusion 4545 Bike in the area where it will be used. It is recommended that the Magnetic Fusion 4545 Bike be placed on an equipment mat. The Magnetic Fusion 4545 Bike is approximately 57 3/4 inches long x 24 3/8 inches wide x 43 3/4 inches tall (max.). (These...

Page 13 - USING THE FITNESS MONITOR OR METER; HOW TO INSTALL AND REPLACE BATTERIES:; OPERATIONAL INSTRUCTIONS

USING THE FITNESS MONITOR OR METER Remove the METER(27) from the METER POST(26). Open the Battery Door on the back of the meter.The METER(27) operates with four AA batteries (four batteries included). Refer to the illustration to install or replace the batteries.Reattach the METER(27) to the METER P...

Page 15 - CONDITIONING GUIDELINES; Have your doctor review your training and diet programs.

CONDITIONING GUIDELINES How you begin your exercise program depends on your physical condition. If you have been inactive forseveral years or are severely overweight, start slowly and increase your workout time gradually. Increaseyour workout intensity gradually by monitoring your heart rate while y...

Page 16 - gently; pull the upper

WARM-UP and COOL-DOWN Warm-Up The purpose of warming up is to prepare your body for exercise and to minimize injuries. Warm up for two to five minutes before strength training or aerobic exercising. Perform activities that raiseyour heart rate and warm the working muscles. Activities may include bri...

Page 17 - THIS WARRANTY SHALL NOT; or email us at; NO ACTION FOR BREACH OF THIS; This limited warranty is not transferable.; IF ANY PART OF THE; In; SHALL NOT BE LIABLE FOR THE LOSS OF USE OF ANY PRODUCT, LOSS OF

WARRANTY LIMITED WARRANTY MODEL 15-4545 Stamina Products, Inc. warrants that this product will be free from defects in materials and workmanshipunder normal use, service and proper operation for a period of 90 days on the parts and three years on theframe from the date of the original purchase from ...

Page 18 - PRODUCT PARTS DRAWING

Page 21 - NOTES

Page 22 - FAX/MAIL ORDERING FORM; and the part will be mailed directly to your house.; DESCRIPTION

IMPORTANT : Before filling out the form below make sure you have the right information. Refer to the parts list to make sure you're ordering the right parts! Detach and Mail or Fax the Form Below Stamina Products, Inc. P.O. Box 1071 Springfield, MO 65801-1071 IMPORTANT : We must have your phone numb...

Stamina 15-4545 - Manual

Table of Contents:

Summary

Other Stamina Models