Stamina 1350 - Manual

5 EQUIPMENT WARNING & NOTICE LABELS This chart is provided to help identify the warning & notice labels on the Magnetic Recumbent 1350 Bike. Please take a moment to familiarize yourself with all of the warning & notice labels. Label is larger than actual size WARNING LABEL(71) W1

6 Part No. and Description Qty 47 Carriage Bolt (M8 x 1.25 x 65mm) 4 49 Bolt, Button Head (M10 x 1.5 x 122mm) 2 51 Bolt, Round Head (M6 x 1 x 35mm) 8 50 Bolt, Hex Head (M6 x 1 x 37mm) 4 54 Screw, Round Head (M5 x 0.8 x 15mm) 4 60 Acorn Nut (M6 x 1) 4 61 Acorn Nut (M8 x 1.25) 4 64 Arc Washer (M6) 4 6...

7 ASSEMBLY INSTRUCTIONS STEP 1 Attach the FRONT STABILIZER(2), the short one with the ENDCAPS(36), to the front of the FRONT F R A M E ( 1 ) w i t h C A R R I A G E B O LT S ( M 8 x 1 . 2 5 x 6 5 m m ) ( 4 7 ) , A R C WA S H E R S ( M 8 ) ( 6 5 ) , L O C K WASHERS(M8)(67), and ACORN NUTS(M8x1.25)(61...

ASSEMBLY INSTRUCTIONS 8 STEP 4 NOTE: Install the HEX BOLTS (M6x1x37mm) (50) as shown in the illustration above. This allows the head of the bolts to fit inside the hex shape holes in the SEAT FRAMES(5, 6). Attach the RIGHT HANDRAIL(8) to the RIGHT SEAT FRAME(6) with HEX BOLTS(M6x1x37mm)(50), ARC WAS...

ASSEMBLY INSTRUCTIONS Bracket Cable End Spring Hook Metal Fitting Strap A Strap B A. B. STEP 6 Refer to illustration A. Pull the ends of the TENSION CABLE(24) and SENSOR WIRE(28) out of the FRONT FRAME(1). There are two straps attached inside of the METER POST(26) to assist when pulling the SENSOR W...

ASSEMBLY INSTRUCTIONS STEP 8 NOTE: The RIGHT PEDAL(35) has R stamped on the end of the pedal shaft. The RIGHT PEDAL(35) has right hand threads and is tightened by turning clockwise. The LEFT PEDAL(34) has L stamped on the end of the pedal shaft. The LEFT PEDAL(34) has left hand threads and is tighte...

11 Locate and read the WARNING LABEL(71) on the Magnetic Recumbent 1350 Bike. Make sure that all users read the WARNING LABEL(71). EQUIPMENT MATP l eas e n o t e t h e R ea r F r am e o f t h eRecumbent Bike is adjustable. Use thelongest size to determine the size of the mat. CAUTION: SET UP INSTRUC...

OPERATIONAL INSTRUCTIONS SEAT ADJUSTMENT CAUTION: 1.2. Unscrew to remove the ADJUSTMENT KNOB(37) from the FRONT FRAME(1). Slide the REAR FRAME (3) to adjust the seat. Lock the REAR FRAME(3) in position by inserting the pin of the ADJUSTMENT KNOB(37) into one of the adjustment holes in the REAR FRAME...

USING THE METER Open the Battery Door on the back of the meter.The meter operates with two AA batteries, two batteries included.Refer to the illustration to install or replace the batteries. 1.2. Do not mix a new battery with an old battery.Use the same type of battery. Do not mix an alkaline batter...

STORAGE 14 1.2. 3. 4. To store the Magnetic Recumbent 1350 Bike, simply keep it in a clean dry place. Adjust the REAR FRAME(3) into the FRONT FRAME(1) to the shortest position. The Magnetic Recumbent 1350 Bike is approximately 39 3/4 inches long x 27 1/4 inches wide x 32 1/4 inches tall. These dimen...

15 CONDITIONING GUIDELINES How you begin your exercise program depends on your physical condition. If you have been inactive forseveral years or are severely overweight, start slowly and increase your workout time gradually. Increaseyour work out intensity gradually by monitoring your heart rate whi...

16 WARM-UP and COOL-DOWN Warm-Up The purpose of warming up is to prepare your body for exercise and to minimize injuries. Warm up for two to five minutes before strength training or aerobic exercising. Perform activities that raise yourheart rate and warm the working muscles. Activities may include ...

17 WARRANTY LIMITED WARRANTY MODEL 15-1350 Stamina Products, Inc. warrants that this product will be free from defects in materials and workmanshipunder normal use, service and proper operation for a period of 90 days on the parts and one year on theframe from the date of the original purchase from ...

PRODUCT PARTS DRAWING 18 FRONT BACK Strap A Strap B

48 Bolt, Button Head (M8 x 1.25 x 15mm) 1 49 Bolt, Button Head (M10 x 1.5 x 122mm) 2 50 Bolt, Hex Head (M6 x 1 x 37mm) 4 51 Bolt, Round Head (M6 x 1 x 35mm) 8 52 Bolt, Flat Head (M10 x 1.5 x 20mm) 1 53 Bolt, Flat Head (M10 x 1.5 x 35mm) 1 54 Screw, Round Head (M5 x 0.8 x 15mm) 4 55 Screw, Flat Head ...

IMPORTANT : Before filling out the form below make sure you have the right information. Refer to the parts list to make sure you're ordering the right parts! Detach and Mail or Fax the Form Below Stamina Products, Inc. P.O. Box 1071 Springfield, MO 65801-1071 IMPORTANT : We must have your phone numb...