Stamina 55-1539 - Manuals - manualsarea.com

Page 2 - Therapy Inversion System.

TABLE OF CONTENTS Page Page Safety Instructions 2 Before You Begin 4 Hardware Identification Chart 5 Assembly Instructions 6 Operational Instructions 10 Maintenance Instructions 12 Warranty 13 Product Parts Drawing 14 Parts List 15 Notes 17 Fax/Mail Ordering Form 18 SAFETY INSTRUCTIONS Extreme obesi...

Page 3 - CALL US FIRST

THANK YOU FOR PURCHASING THE Therapy Inversion System To help you get started, we have pre-assembled most of your Therapy Inversion System at the factory with the exception of those few parts left unassembled for shipping purposes. Simply follow the few assembly instructions set forth in this manual...

Page 4 - BEFORE YOU BEGIN; Thank you for choosing the; Therapy Inversion; We take great pride in producing this; T h e r ap y; provides a convenient and

BEFORE YOU BEGIN Thank you for choosing the Therapy Inversion System. We take great pride in producing this quality product and hope it will provide many hoursof quality exercise to make you feel better, look betterand enjoy life to its fullest. Yes, it's a proven fact that a regular exerciseprogram...

Page 5 - H A RDWA R E I D E N T I F I C AT I O N C H A RT; INCHES

5 Part No. and Description Qty 43 Bolt, Hex Head (M6 x 1 x 42mm) 1 44 Bolt, Hex Head (M6 x 1 x 47mm) 1 45 Bolt, Hex Head (M8 x 1.25 x 15mm) 2 46 Bolt, Hex Head (M8 x 1.25 x 25mm) 2 48 Nylock Nut (M6 x 1) 2 49 Nylock Nut (M8 x 1.25) 4 50 Washer (M6) 4 51 Washer (M8) 6 52 Large Washer (M8) 2 53 Large ...

Page 6 - ASSEMBLY INSTRUCTIONS; BASE ASSEMBLY

ASSEMBLY INSTRUCTIONS Place all parts from the box in a cleared area and position them on the floor in front of you. Remove allpacking materials from your area and place them back into the box. Do not dispose of the packing materialsuntil assembly is completed. Read each step carefully before beginn...

Page 9 - DO NOT OVER TIGHTEN THE

ASSEMBLY INSTRUCTIONS Shaft Shaft 9 Nylon Bed (10) Handrail (10) Handrail LEFT RIGHT STEP 13: Verify that the handlebars function correctly before using the Therapy Inversion System. Move the Nylon Bed on the MAIN FRAME(4) backward toward the inverted position. The HANDRAILS(10) must move forward as...

Page 10 - Therapy Inversion System; HEIGHT ADJUSTMENT

OPERATIONAL INSTRUCTIONS GENERAL PRECAUTIONS Do not use the Therapy Inversion System alone. Always have a helper available in case assistance is needed in recovering from the decline position.Make sure that the FOAM PADS(16) and HEEL HOLDERS(19) are holding your feet securely. Make sure that the HEI...

Page 11 - FOAM

OPERATIONAL INSTRUCTIONS HEEL HOLDER USE AND ADJUSTMENT Start by lying fully back on the bed with your hands at your side, or resting on your thighs.Keeping your hands close to your body begin to raise your arms slowly allowing the table to rotatebackward. Stop, or lower your arms to control the dow...

Page 12 - HANDRAILS; MAINTENANCE INSTRUCTIONS; RECOVERY FROM LOCKED POSITION

OPERATIONAL INSTRUCTIONS 12 SUGGESTIONS FOR USE Begin slowly; invert only 15-20 degrees to begin with. Stay inverted only as long as you are comfortable.Return upright slowly.Make gradual changes: increase the angle only if it is comfortable. Increase the angle only a fewdegrees at a time. Increase ...

Page 13 - THIS WARRANTY SHALL NOT; or call us at; IF ANY PART OF THE PRODUCT IS NOT IN COMPLIANCE WITH THIS LIMITED; In the event that the purchaser makes any claim under this; SHALL NOT BE LIABLE FOR THE LOSS OF USE OF ANY PRODUCT, LOSS OF; WARRANTY

Stamina Products, Inc. warrants that this product will be free from defects in materials and workmanshipunder normal use, service and proper operation for a period of 90 days on the parts and 5 years on theframe from the date of the original purchase from an authorized retailer. THIS WARRANTY SHALL ...

Page 14 - PRODUCT PARTS DRAWING; BACK

Page 17 - NOTES

Page 18 - FAX/MAIL ORDERING FORM; Our Customer Service Department will be able to assist; DESCRIPTION

IMPORTANT : Before filling out the form below make sure you have the right information. Refer to the parts list to make sure you're ordering the right parts! Detach and Mail or Fax the Form Below Stamina Products, Inc. P.O. Box 1071 Springfield, MO 65801-1071 IMPORTANT : We must have your phone numb...