Smooth Fitness 9.6P - Manual

STEP 6: Place the treadmill in operating position. Make certain cables from upper computer do not come in contact with motor fan. Apply AC power. Start the unit andobserve belt tracking. Unit must be reasonably level for proper tracking. Test treadmillbasic operation. This includes noise, motor perf...

l NEVER operate this treadmill without reading and completely understanding the results of any operational change you request from the computer. l Understand that changes in speed and incline do not occur immediately. Set your desired speed on the computer console and release the adjustment key. The...

Operation of Your New Treadmill DO NOT STAND ON THE WALKING BELT WHILE LEARNING TO OPERATE YOUR NEW TREADMILL!!! Basic Treadmill Operation: Step 1: Press and release DISPLAY ON/FAST key. Display will light. Step 2: For calorie computation if desired;(A) Calorie window will display LBS . (B) Use blue...

Program Descriptions NOTE: Refer to the section entitled “Operating Your New Treadmill” for program opera-tion instructions. Speed and Incline Programs All Smooth Programmable treadmills are equipped with eight different programs to addvariety to your workout. Each program is evenly divided into 10 ...

Note: Refer to instructions on countdown elapsed time feature. All programs have the workout pre-set at 20 minutes. You may change to another (10 minutes is minimum) ifdesired by following instructions pertaining to countdown time. This must be donebefore DISPLAY ON/FAST s key is pressed. To Select ...

To Custom Program User (U1 thru U4): Step 1: Refer to Select a Program. Repeat Step 1 & 2. Press and release the SELECT key past P4 to user U1. There are 4 available. Step 2: Use the FAST s SLOW t speed keys to make a speed entry. Display will show desired speed and U1-1. Use the blue incline Up...

General Maintenance Belt and Bed - Your treadmill uses a very high-efficient low-friction bed. Performance is maximized when the bed is kept as clean as possible. Use a soft, damp cloth orpaper towel to wipe the edge of the belt and the area between the belt edge and frame.Also reach as far as pract...

TREADBELT TRACKING ADJUSTMENT: The performance of your treadmill is dependent on the frame running on a reasonablylevel surface. If the frame is not level, the front and back roller cannot run parallel, andconstant belt adjustment may be necessary. The treadmill is designed to keep the treadbelt rea...

Service Checklist - Diagnosis Guide Before contacting your dealer for aid, please review the following information. It maysave you both time and expense. This list includes common problems that may not becovered under the treadmill’s warranty. PROBLEM SOLUTION/CAUSE Display does not light Treadbelt ...

SMOOTH TREADMILLS – LIMITED WARRANTY TREADMILL DRIVE MOTOR 10 YEAR WARRANTY ADDENDUM EFFECTIVE MARCH 1, 2001 FOR THE FOLLOWING SMOOTH TREADMILL MODELS ONLY: SM5.0P (includes version 2 PV2) SM5.3P SM5.1HR SM9.1P SM9.1HRC SM9.2P SM9.2HR SM9.2AB (aeropedic belt) SM9.6P SM9.6HRC This Limited Warranty am...