SIIG 5090S - Manual

SIIG 5090S

SIIG 5090S – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12
Page: / 12

Table of Contents:

  • Page 2 – System Requirements; Desktop or notebook PC with an available; Package Contents; Installation kit; Layout
  • Page 3 – Hardware Installation; The following section guides you through the; Figure; . Slide the top cover out of the case, then; Figure 4
  • Page 4 – Take off the PCB and connect it to the hard; and; Figure 6
  • Page 5 – Hold onto the hard disk drive and turn the; Figure 8
  • Page 6 – Driver Installation
  • Page 7 – Using the; Disconnecting From The Computer; Enclosure
  • Page 9 – USB 2.0 to SATA Enclosure
  • Page 10 – Blank Page
  • Page 11 – Technical Support and Warranty
Loading the manual

1

2.5" USB 2.0 to SATA Enclosure
Q u i c k I n s t a l l a t i o n G u i d e

04-0651A

Introducing the

USB 2.0 2.5" Enclosure

The

2.5" USB 2.0 to SATA Enclosure

is designed to

support USB equipped computers. This enclosure

provides large capacity mobile storage using 2.5"

SATA hard disk drives through High-Speed USB

2.0, hot-swapping interface.

Key Features and Benefits

•

Quickly adds more storage space to your

USB-enabled PC

•

No driver installation required. Simply

install a 2.5" SATA (3 Gb/s or 1.5 Gb/s)

hard disk into the enclosure then connect to

a USB port

•

Supports Hi-Speed USB 2.0 data transfer

rate up to 480 Mb/s

•

Compliant with Universal Serial Bus 2.0

Specification

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - System Requirements; Desktop or notebook PC with an available; Package Contents; Installation kit; Layout

2 System Requirements • Desktop or notebook PC with an available USB 2.0/3.0 port • Windows ® 7 (32-/64-bit) ) / Vista (32-/64- bit) / XP (32-/64-bit) / Server 2003 & 2008 (32-/64-bit) / 2000 SP4 Package Contents • 2.5" USB 2.0 to SATA Enclosure • USB Y-split (data & power) cable • Insta...

Page 3 - Hardware Installation; The following section guides you through the; Figure; . Slide the top cover out of the case, then; Figure 4

3 Figure 2: USB cable Hardware Installation The following section guides you through the installation of your drive kit. Installing a 2.5" Hard Drive 1 . Remove the 2 screws in each side, see Figure 3 . Slide the top cover out of the case, then slide the lower cover out of the case, see Figure 4...

Page 4 - Take off the PCB and connect it to the hard; and; Figure 6

4 2 . Take off the PCB and connect it to the hard disk drive, see Figure 5 and Figure 6 . Figure 5 Figure 6

Other SIIG Models

All SIIG Other