SIIG 04-0860A - Manual
SIIG 04-0860A – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – System Requirements; Windows; Package Contents; Spare low profile bracket
- Page 3 – Layout; Note; : The internal SATA 3 and SATA 4
- Page 4 – Jumper Settings; Figure 1
- Page 5 – Hardware Installation
- Page 6 – Device Connection
- Page 7 – RAID Arrays; Driver; Serial ATA cable
- Page 11 – Rebuilding a Failed Mirror Set
- Page 12 – Deleting RAID Arrays
- Page 13 – Driver Installation
- Page 15 – For Windows Vista
- Page 19 – To Verify Windows Installation
- Page 20 – Marvell Storage Utility
- Page 21 – Figure 4
- Page 23 – Technical Support and Warranty
1
Introduction
The
DP SATA 6Gb/s 4-Port Hybrid PCIe
is a high
performance SATA host adapter designed to
add four internal Serial ATA 6Gb/s channels
and two eSATA external connectors to your
PCIe-equipped computer.
Features and Benefits
•
Compliant with Serial ATA specification,
Revision 3.0
•
Hybrid (HyperDuo) enables 80% of SSD
performance at one-third the cost
•
Hardware RAID to offload the host CPU
for maximum performance
•
Supports RAID 0, 1 & 10
•
Supports Port Multiplier FIS-based and
Native Command Queuing (NCQ)
•
Supports TRIM to extend the life of SSDs for
maximum durability
D P S A T A 6 G b / s 4 - P o r t
Hybrid PCIe
Q u i c k I n s t a l l a t i o n G u i d e
04-0860A
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 System Requirements • Desktop PC with an available 4-lane (or more) PCIe slot • Windows ® 8 (32-/64-bit) / 7 (32-/64-bit) / Vista (32-/64-bit) / XP (32-/64-bit) /Server 2003 & 2008 (32/64-bit) / Server 2008 R2 Package Contents • DP SATA 6Gb/s 4-Port Hybrid PCIe • Spare low profile bracket • SA...
3 eSATA 6 eSATA 5 SATA 3 (bottom)& SATA 4 (top)* SATA 1(bottom)& SATA 2(top) 2 eSATAconnectors HDD LED (optional) 4 SATAinternalconnectors Layout Figure 1: Layout * Note : The internal SATA 3 and SATA 4 connectors are dedicated channels, they can not be disabled. JP1JP2 JP4 JP3 3 2 1 3 2 1 J...
4 Jumper Settings Refer to Figure 1 for the positions of each connectors. SATA 1, 2 and eSATA 5, 6 are interchangeable. Follow the instructions in Table 1 to configure the jumper. Table 1: Jumper Settings JP1 JP5 JP1 JP5 3 2 1 3 2 1 3 2 1 3 2 1 JP1 JP5 3 2 1 3 2 1 JP1 JP5 3 2 1 3 2 1