SIIG 04-0600B - Manual
SIIG 04-0600B – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Package Contents; Mounting hardware; Mounting Hardware; M6x20mm Machine Screw
- Page 3 – Installation; Single Hole Mounting; Figure 1
- Page 4 – Figure 3
- Page 5 – Key Hole Mounting; If your speaker has a factory key hole design, you will; Figure 4
- Page 7 – Figure 5; Locate the optimum location for the mounting plate; Figure
- Page 8 – Figure 6; Mounting to the Wall or Ceiling; Figure 7
- Page 9 – Drywall Surfaces; Figure 8
- Page 10 – Concrete Surface; Figure 9
- Page 11 – With the wall anchor in place, mount the wall plate; Extension Mounting; This is for ceiling and/or shelf applications. Do not use
- Page 12 – Speaker Mounting
- Page 13 – Blank Page
- Page 15 – Technical Support and Warranty
- Page 16 – PRODUCT NAME; FCC COMPLIANCE STATEMENT:
1
S a t e l l i t e S p e a k e r
Mounts - 1 Pair
Quick Installation Guide
04-0600B
Introduction
The
Satellite Speaker Mounts - 1 Pair
are fully-adjustable (Tilt,
Swivel, & Pivot) speaker wall or ceiling mounts.
Key Features and Benefits
•
Universal design fits most speaker brands & designs
•
Ceiling or wall mountable & compatible with 1, 2, or
4-hole and key-hole speaker mounting (with included
adapters)
•
Allows customizable tilt, swivel, & pivot angle
adjustments for optimal speaker positioning
•
Holds speakers weighing up to 8 lbs
Serial Number Sticker
For future product return or exchange, this serial number is
required. Please keep it for your reference.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 Package Contents • (2) Speaker mounts • (2) 1-hole adapters • (2) 2/4-hole adapters • (2) 2 ¼” ceiling mount extensions • Mounting hardware • Quick installation guide Mounting Hardware M6x20mm Machine Screw M5 x 20mm Machine Screw 8-32 x 5/8" Machine Screw 1/4"-20 x 1/2" Machine Screw ...
3 Installation Please read the instructions prior to installation. This speaker mount is designed solely for the mounting of small speakers weighing less than 8lbs. We are not responsible for damage that may occur if speakers weighing more than 8lbs. are used.The user will have to determine which ty...
4 2. Once the proper configuration is determined, secure the post to the speaker. 3. Some speakers use the smaller M4 x 8 screw, which is inserted into the off-center on the mounting post, see Figure 2 below. 4. Check the size of the hole, make sure you have the 8-32 x 5/8" machine screw, the 1/...
