SIIG 04-0322C - Manual
SIIG 04-0322C – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Package Contents; Board Layout; Hardware Installation
- Page 3 – Device Connection; Serial ATA power cable; Serial ATA cable
- Page 4 – Serial; Driver Installation
- Page 8 – To Verify Windows Vista Installation
- Page 10 – To Verify Windows Server 2008 Installation
- Page 11 – Windows ME
- Page 12 – To Verify Windows 98SE / ME Installation
- Page 13 – To Verify Windows NT4.0 Installation; This device is working properly
- Page 14 – Bios Configuration; The; BIOS; will appear everytime
- Page 15 – Technical Support and Warranty; Online Support
- Page 16 – features, and are backed by an extensive manufacturer warranty.
1
Serial ATA 4-Channel PCI
Quick Installation Guide
0 4 - 0 3 2 2 C
Introducing the Serial ATA 4-Channel PCI
The
Serial ATA 4-Channel PCI
is an ultra high-speed four
channel Serial ATA controller for use in Pentium-class
computers. It achieves burst data transfer rates up to
150MB/s (1.5Gb/s) and supports various brands of hard
disk drives with capacities greater that 137GB.
Features and Benefits
•
Compliant with Serial ATA Specification, rev 1.0
•
Compliant with PCI Specification, revision 2.2
•
Provides four independent channels to support up
to four Serial ATA drives
•
Features independent 256-byte FIFOs per channel
for host reads and writes
•
Co-exists with on-board HDD controllers
•
Features Watch Dog timer for fault resiliency
•
Supports 32-bit wide PCI bus at 66MHz
•
Lower pin count and voltage requirements, plus
better cabling over traditional Parallel ATA (IDE)
make Serial ATA the controller of the future
System Requirements
•
Pentium
®
class computer with one available PCI
slot
•
Windows
®
98SE / ME / NT4.0 / 2000 / XP (32-/64-
bit) / Server 2003 & 2008 (32-/64-bit) / Vista (32-/
64-bit)
•
CD-ROM
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 Package Contents • Serial ATA 4-Channel PCI board • Serial ATA cable (x2) • Dual connector Serial ATA power cable • Driver CD • This quick installation guide Board Layout Serial ATA Connectors CN4 CN3 CN2 CN1 Hard Disk LED Pins Figure 1. Serial ATA 4-Channel PCI Layout Hardware Installation Genera...
3 1. Turn OFF the power to your computer. 2. Unplug the power cord and remove your computer cover. 3. Remove the slot bracket from an available PCI slot. 4. Carefully align the card to the selected PCI slot push the board down firmly, but gently, until it is well seated. 5. Replace the slot bracket ...
4 Note : If you like to monitor disk activity of the Serial ATA hard drives, you may at this time connect the hard disk LED of the system case to the Hard Disk LED Pins on the Serial ATA controller, see Figure 1 , on page 2 for the location of the pins. For most systems connect the red wire to the p...
