ResMed 368870/1 2012-10 - Manual

ResMed 368870/1 2012-10

ResMed 368870/1 2012-10 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12
13 Page 13
Page: / 13

Table of Contents:

  • Page 2 – S9 Escape indications for use; English
  • Page 3 – Control panel; dial allows you to enter into a menu and confirm your choice.; Navigating the menus; until the parameter you require is displayed in blue.; Getting started; Daily
  • Page 4 – Replacing the air filter:; Troubleshooting; Problem/Possible cause; No display
  • Page 5 – Pressure rises inappropriately; High temperature fault, refer to user manual; Check ResMed 30/90W Power Supply Unit and fully insert the; Displays error message:; Tube blocked, please check your tube
  • Page 6 – SD card; High leak, please check system setup and all connections; This message only appears once. If you re-insert the; Settings updated successfully, press any key
  • Page 7 – The air flow for breathing produced by this therapy
  • Page 8 – are not
  • Page 9 – Pneumatic flow path; Environmental information; Servicing; S9 Escape
  • Page 10 – Limited warranty; Product
  • Page 11 – WARNINGS; Read the entire manual before using the device.
  • Page 12 – Do not use electrically conductive or antistatic air tubings.; CAUTIONS
  • Page 13 – User Guide; POSITIVE AIRWAY PRESSURE DEVICES
Loading the manual

Global leaders in sleep and respirator y medicine w w w.resmed.com

User Guide

English

S9 Escape

™

POSITIVE AIRWAY PRESSURE DEVICES

Manufacturer:

ResMed Ltd 1 Elizabeth Macarthur Drive Bella Vista NSW 2153 Australia.

Distributed by:

ResMed Corp 9001 Spectrum Center Boulevard San Diego CA 92123 USA.

ResMed (UK) Ltd 96 Milton Park Abingdon Oxfordshire OX14 4RY UK. See www.resmed.com for other ResMed locations worldwide.

For patent information, see www.resmed.com/ip.
S9, S9 Escape, SlimLine and ClimateLine are trademarks of ResMed Ltd. S9, Escape, SlimLine and ClimateLine are registered in U.S. Patient and T

rademark Office.

© 2012 ResMed Ltd. 368874/1 2012-10

A

B

C

3

1

2

4

5

3

1

2

4

6

5

368874 Cover.indd 1

2/10/2012 3:03:52 PM

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - S9 Escape indications for use; English

English 1 S9 Escape indications for use The S9 Escape CPAP system is indicated for the treatment of obstructive sleep apnoea (OSA) in patients weighing more than 30 kg. The S9 Escape CPAP system is intended for home and hospital use. Contraindications Positive airway pressure therapy may be contrain...

Page 3 - Control panel; dial allows you to enter into a menu and confirm your choice.; Navigating the menus; until the parameter you require is displayed in blue.; Getting started; Daily

English 2 Control panel Refer to illustration B.The control panel of your S9 device includes the following items: 1. Start/Stop button: Starts or stops treatment2. Home menu 3. LCD screen 4. Info menu*: Allows you to view your sleep statistics5. Setup menu*: Allows you to make changes to settings6. ...

Page 4 - Replacing the air filter:; Troubleshooting; Problem/Possible cause; No display

English 3 Weekly: 1. Remove the air tubing from the S9 device and the mask.2. Wash the air tubing in warm water using mild detergent.3. Rinse thoroughly, hang, and allow to dry.4. Before next use, reconnect the air tubing to the air outlet and mask. Monthly: 1. Wipe the exterior of the S9 with a dam...

Other ResMed Models

All ResMed Other