Philips AC0820 / 10 - Quick Guide
This user manual provides comprehensive operating and maintenance instructions for the air purifier. It covers control functions including mode switching (Auto, Turbo, Sleep) and power on/off. The display section explains the air quality indicator with color-coded levels from Good to Very Poor, and a filter replacement alert. Maintenance instructions emphasize regular cleaning of the filter surface every 4 weeks and replacement when the display prompts, including a reset procedure after replacement. The manual also addresses potential filter odor issues, recommending exposure to direct sunlight to mitigate smells.
Table of Contents:
- Page 1 – Control, Display, and Maintenance
- Page 2 – Control, Display, and Maintenance (Czech)
- Page 3 – Control, Display, and Maintenance (Kazakh)
- Page 4 – Control, Display, and Maintenance (Polish)
- Page 5 – Control, Display, and Maintenance (Romanian)
- Page 6 – Control, Display, and Maintenance (Russian)
Pluto Non DI_CEE_EN 90x127mm
Control
Mode switch/ Filter reset
•Auto •Turbo •Sleep
Power on/off
Display
Air quality light
Air quality
Good Fair Poor Very poor
Filter replacement alert
Maintenance
Clean the surface of the filter
Replace filter when display shows
Clean the surface of the filter every 4 weeks.
Long press the for 3 seconds after replacing the filter (AC0819/AC0820: FY0194, AC0830: FY0293).
The filter may produce smell after being used for a while because of the absorption of indoor air. Remove the filter and place it where it has direct sunlight and ventilation for several hours. Re-install and try using it again. If the odor remains, please replace the filter.
3000 055 05441-1
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Other Manuals for Philips AC0820 / 10
Summary
Overview of control modes, air quality color indicator, filter replacement alert, and maintenance steps: clean filter every 4 weeks, replace when alerted, reset after replacement, and handle odor by placing filter in sunlight.
Czech section covers same control and display features, with filter cleaning every 4 weeks, replacement with reset procedure, and odor removal by sunlight exposure.
Kazakh section details control modes, air quality display, filter maintenance including cleaning, replacement, reset, and odor elimination advice.
Tips
- Clean the filter surface every 4 weeks to maintain optimal air quality.
- Replace the filter when the indicator alerts; after replacement, press and hold the mode button for 3 seconds to reset the filter life indicator.
- If a smell develops, remove the filter and place it in direct sunlight for several hours before reusing.
