Philips TFT_AC3854/AC3858 - User Manual
This user manual provides comprehensive guidance on the Philips Mars air purifier models TFT_AC3854/AC3858. It covers app connectivity through the Clean Home+ application, control panel operations, and display indicators for air quality including gas, allergen, and PM2.5 levels. The manual also includes maintenance instructions for the NanoProtect filter Series 3, such as cleaning, replacement, and timer reset procedures.
Table of Contents:
- Page 1 – App Setup, Controls, and Maintenance
- Page 2 – Connectivity and Display Indicators
- Page 3 – Filter Care and App Features
- Page 4 – Control Panel and Air Quality Monitoring
- Page 5 – Maintenance and App Connectivity
Mars TFT_AC3854/AC3858 CEE_EN 90x127mm
Connectivity
You can use the app to control the purifier and check air quality. Download and install the Philips app
Clean Home+
Open the app and click on "Connect a New Device" or press
the "+" button to connect your device. Please follow the
steps in the app.
Control
Power Filter status/ reset Display switch Mode switch Light on/off
• PM2.5
• Gas
• IAI
• Auto
• Turbo
• Sleep
Display
Auto mode Turbo mode Sleep mode
Wi-Fi indicator Filter cleaning Filter replacement
alert alert
Gas indicator Indoor allergen PM2.5 Air quality
L1 02 009
index index indicator light
Gas index from L1-L4. L1 indicates best air quality
Allergen index 1-12. 1 indicates best air quality
Good Fair Poor Very poor
Maintenance
1
NanoProtect filter Series 3 (FY4440/30)
When display shows
• Time to clean the NanoProtect filter Series 3
When display shows
• Time to replace the NanoProtect
filter Series 3
! Press to check filter lifetime status.
! Press for 3 seconds to reset after cleaning or replacing filter.
The filter may produce smell after being used for a while because of the
absorption of indoor air. Remove the filter and place it where it has direct
sunlight and ventilation for several hours. Re-install and try using it again.
If the odor remains, please replace the filter.
3000 038 71833-1
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Instructions for connecting the Philips Clean Home+ app, using the power and mode buttons, interpreting display lights for air quality (gas, allergen, PM2.5, and overall quality), and steps for cleaning or replacing the NanoProtect filter Series 3 with reset instructions.
Guide to pairing the air purifier with the app, understanding the control panel functions (power, mode, light, filter reset), and reading the display modes including auto, turbo, sleep, and air quality feedback via index values and colored light.
How to maintain the NanoProtect filter Series 3: cleaning tips, replacement procedure, and resetting the filter timer via the button. Also covers app connectivity for remote monitoring and control of the purifier.
Tips
- Regular filter maintenance is crucial for optimal performance. If the filter develops an odor, place it in direct sunlight with good ventilation for several hours. If the smell persists, replace the filter.
- Always reset the filter timer after cleaning or replacing the filter by holding the reset button for 3 seconds.
- Use the Philips Clean Home+ app for remote control, mode selection, and real-time air quality monitoring.
