Philips Mars DI CEE - User Manual
Get started with your Mars DI CEE air purifier using this comprehensive manual. Learn how to connect via the Philips Clean Home+ app for remote control, operate the control panel, and interpret the display modes and air quality indicators (PM2.5, gas, allergens).
The maintenance section guides you through cleaning and replacing the NanoProtect filter Series 3 (FY3430/30), including resetting the filter life indicator. Keep your air clean with these easy-to-follow instructions.
Table of Contents:
- Page 1 – Connectivity, Control, Display, Maintenance
- Page 2 – Connectivity, Control, Display, Maintenance
- Page 3 – Connectivity, Control, Display, Maintenance
- Page 4 – Connectivity, Control, Display, Maintenance
- Page 5 – Connectivity, Control, Display, Maintenance
Mars DI CEE_EN 90x127mm
Connectivity
You can use the app to control the purifier and check air quality. Download and install the Philips app
Clean Home+
Open the app and click on "Connect a New Device" or press the "+" button to connect your device. Please follow the steps in the app.
Control
Power Filter status/ reset Display switch Mode switch Light on/off
• PM2.5
• Gas
• IAI
• Auto
• Turbo
• Sleep
Display
Auto mode Turbo mode Sleep mode
Wi-Fi indicator Filter cleaning alert Filter replacement alert
Gas IAI PM2.5 888 Air quality light
Gas indicator Indoor allergen index PM2.5 indicator 3-digit display IAI / Gas / PM2.5
Gas index from L1-L4, L1 indicates best air quality
Allergen index 1-12, 1 indicates best air quality
Good Fair Poor Very poor
Maintenance
NanoProtect filter Series 3 (FY3430/30)
When display shows
• Time to clean the NanoProtect filter Series 3
When display shows
• Time to replace the NanoProtect filter Series 3
1 • Press to check filter lifetime status. Press for 3 seconds to reset after cleaning or replacing filter.
The filter may produce smell after being used for a while because of the absorption of indoor air. Remove the filter and place it where it has direct sunlight and ventilation for several hours. Re-install and try using it again. If the odor remains, please replace the filter.
3000 038 71933-1
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Introduction to the Philips Clean Home+ app for remote control. Overview of control buttons and display modes (Auto, Turbo, Sleep). Explanation of air quality indicators (PM2.5, gas, IAI) and the three-digit display. Maintenance instructions for the NanoProtect filter Series 3 (FY3430/30), including cleaning, replacement, and resetting the filter life indicator....
Introduction to the Philips Clean Home+ app for remote control. Overview of control buttons and display modes (Auto, Turbo, Sleep). Explanation of air quality indicators (PM2.5, gas, IAI) and the three-digit display. Maintenance instructions for the NanoProtect filter Series 3 (FY3430/30), including cleaning, replacement, and resetting the filter life indicator....
Introduction to the Philips Clean Home+ app for remote control. Overview of control buttons and display modes (Auto, Turbo, Sleep). Explanation of air quality indicators (PM2.5, gas, IAI) and the three-digit display. Maintenance instructions for the NanoProtect filter Series 3 (FY3430/30), including cleaning, replacement, and resetting the filter life indicator....
Tips
- Clean or replace the filter when the display prompts you to maintain optimal performance.
- Monitor and control the air purifier remotely using the Philips Clean Home+ app.
- If the filter develops an odor, expose it to direct sunlight and ensure good ventilation before reinstalling.
- Replace the filter if the odor persists after airing.
