Page 2 - Telephone buttons
Telephone buttons You can use the following types of telephones to program your MICs system:M7310 or M7324 Norstar telephones or T7316 or T7316E Business Series Terminal.This guide uses the Business Series Telephone button icons for programming procedures. Refer to the table below for the keycap ico...
Page 3 - Contents; Registration 15
P0603536 02 Modular ICS 6.1 Programming Record Contents Telephone buttons ii General information 1 Installed equipment 2 Programming overview (Profiles 1 and 4) 3 Programming overview (Profiles 2 and 3) 6 Programming overview MICS-XC (Companion) 9 Companion programming charts 13 System LID (Companio...
Page 5 - Sys speed dial 52
v Modular ICS 6.1 Programming Record P0603536 02 Line restrns 44Remote restrns 44 Telco features 44 Services 45 Ringing service 45 Restrn service 46 Routing service 47 If PRI-A, PRI-B, PRI-C, or PRI-D 48If service type requires service id 48If Protocol is SL-1 or TIE service type 48Using line pools ...
Page 6 - Network Services 61
vi Modular ICS 6.1 Programming Record P0603536 02 Remote access 59 Rec’d # length 60 DN length 60 National length 60 Make / Break 60 Business name 60 CbC limits 60 Release reasons 60 Hospitality 61 SM sets 61 Network Services 61 ETSI (Profile 2, only) (software key required) 61 MCDN (Profile 1, 2, a...
Page 7 - Maintenance 72
vii Modular ICS 6.1 Programming Record P0603536 02 StnMod 71 Maintenance 72 System version 72 Sys test log 73 Sys Admin Log 74 Network evt log 75 Template specific defaults 76 Terminals&Sets defaults 76 Line Access 76Restrictions 76Telco features (Feature assignmnt) 77 Lines defaults 77 Trunk/Li...
Page 9 - General information; Copying set programming; Supplier
1 P0603536 02 Modular ICS 6.1 Programming Record General information All defaults for the default templates are shown in bold and underlined text. Copying set programming You can use the COPY command to copy programming from one telephone to other set, a range of sets or all the sets. Depending on w...
Page 10 - Installed equipment; Telephones
2 Modular ICS 6.1 Programming Record P0603536 02 Installed equipment 0X32 ICS Telephones Quantity Equipment Quantity Equipment Integrated Communication System (ICS) M7100 telephone Modular ICS NVRAM cartridge M7208 telephone Modular ICS ROM software cartridge M7310 telephone Cartridge assembly M7310...
Page 11 - Profile; Lines
3 P0603536 02 Modular ICS 6.1 Programming Record Profile PROF 1 Dialpad Q, Z:0 Startup Template Square/(XC)PBX Start DN 221 Terminals&Sets Show set:_ Line access Line assignment Show line:_ (If it is a Non-DID line) L001 Unassigned (If it is a DID line) L001 1 (If PRI) L001: PRI-A LinePool acces...
Page 12 - Services; Passwords
4 Modular ICS 6.1 Programming Record P0603536 02 Services Ringing service Ringing groups Show group:_ Ring grp 01 Show set:_ 221 Assigned 222 Unassign Sched: Night Service Off Trunk answer Y ExtraDial 221 Line settings Show line:_ Ring grp 001 Aux. ringer N Sched:EveningSched:LunchSched:Sched 4Sched...
Page 13 - Telco features; Software keys
5 P0603536 02 Modular ICS 6.1 Programming Record Priv DN len 3 Type UDP PrivNetId 1 Loc code None Priv DN len 3 Public network Pub DN lengths Show prefix:Prfx:Deflt DN length 7 Dial timeout Dial timeout 4 Access codes Line pool codes Line pool A 9 Park prefix 1 Extrnl code None Direct-dial 0 Auto DN...
Page 14 - Maintenance
6 Modular ICS 6.1 Programming Record P0603536 02 Config Ptl V.35 DS0 rate 64k TxClk src Auto TxClk invrsn Off Data invrsn Off Fixed access Show line:_ L001: Unassigned L001: Channel:xx Lp state None Lpbk Off Cd2-KSU Loop Mod 03 to 08 StnMod Maintenance System version Port/DN status Module status Sys...
Page 17 - Usage Metrics
9 P0603536 02 Modular ICS 6.1 Programming Record Network evt log Provisioning Tests CSU stats Diagnostic tools Link status Usage Metrics Hunt groups Call-by-Call Profile PROF 1 Dialpad Q, Z:0 Startup Template PBX Start DN 221 Terminals&Sets Show set:_ Line access Line assignment Show line:_ (If ...
Page 19 - System prgrming
11 P0603536 02 Modular ICS 6.1 Programming Record System prgrming Hunt groups Show group:_ HGnn:<DN> Member DNs M001: Appr&Ring Line assignment Show line:_Lnnn: Unassigned Mode: Broadcast Hunt delay: (sequential mode only) 4 If busy: BusyTone Timeout: 60 Overflow: <DN> or <hunt gr...
Page 21 - Companion programming charts; System LID
13 P0603536 02 Modular ICS 6.1 Programming Record Companion programming charts The next four pages contain charts specific to programming the Companion information. All other programming for MICS-XC systems are the same asfor the other MICS systems, and follows this section. System LID (Companion se...
Page 22 - Change DN type
14 Modular ICS 6.1 Programming Record P0603536 02 Change DN type (Companion sets for MICS-XC systems) (System prgrming; Change DN type) DN Type DN Type DN Type ISDN Portable ISDN Portable ISDN Portable ISDN Portable ISDN Portable ISDN Portable ISDN Portable ISDN Portable ISDN Portable ISDN Portable ...
Page 23 - Registration
15 P0603536 02 Modular ICS 6.1 Programming Record Registration (Companion; Registration) Unavail appears only on USA-MICS-XC 4.1). WTN Registrd status WTN Registrd status WTN Registrd status Registrd Availble Unavail Pending Registrd Availble Unavail Pending Registrd Availble Unavail Pending Registr...
Page 24 - Radios
16 Modular ICS 6.1 Programming Record P0603536 02 Radios and Cells (Companion CT2+ sets for MICS-XC systems) (System prgrming; Companion; Radios and System prgrming; Companion; Cells) TCM port: KSU block number device type * *. Write E if using an external antenna. n † †. n is the radio number. Each...
Page 25 - Hardware; Modules
17 P0603536 02 Modular ICS 6.1 Programming Record Hardware Modules Mod 03 StnMod ASM DataMod TrunkMod Mod 04 StnMod ASM DataMod TrunkMod Mod 05 StnMod ASM DataMod TrunkMod Mod 06 StnMod ASM DataMod TrunkMod Mod 07 StnMod ASM DataMod TrunkMod Mod 08 StnMod ASM DataMod TrunkMod Mod 09 StnMod ASM DataM...
Page 26 - Installed telephones and other devices
18 Modular ICS 6.1 Programming Record P0603536 02 To record additional information, photocopy this page before using. Installed telephones and other devices Name or location Telephone model BLF CAP/KIM ATA Port No. Default DN (max. 7 digits) New DN * (max. 7 digits) *. Change DNs in System prgrming;...
Page 27 - Photocopy pages before using.; Initial settings; Dialpad; Start DN
19 P0603536 02 Modular ICS 6.1 Programming Record Photocopy pages before using. Initial settings Profile Dialpad Startup Profile PROF 1 PROF 2 PROF 3 PROF 4 Dialpad Q, Z:0 Q, Z:7, 9 Template PBX DID Start DN 221 __________________________
Page 28 - Line Access
20 Modular ICS 6.1 Programming Record P0603536 02 Photocopy pages before using. Terminals&Sets Line Access (Terminals&Sets: Line access) Sets: (max. 7 digits) Line assignment List 3 digit line number and circle line assignment.AR = Appear&RingA = Appear onlyR = Ring onlyblank = Unassigne...
Page 29 - Capabilities
21 P0603536 02 Modular ICS 6.1 Programming Record Photocopy pages before using. Capabilities (Terminals&Sets: Capabilities) Sets: (max. 7 digits) Fwd no answer None to: None to: None to: None to: None to: None to: None to: Fwd delay 2 3 4 6 10 2 3 4 6 10 2 3 4 6 10 2 3 4 6 10 2 3 4 6 10 2 3 4 6 ...
Page 30 - Name
22 Modular ICS 6.1 Programming Record P0603536 02 Photocopy pages before using. Name (Terminals&Sets: Name) User prefernces (Terminals&Sets: User preferences) Name (max. 7 char.) 221 _________ 221 _________ 221 _________ 221 _________ 221 _________ 221 _________ 221 _________ Mdl M7324 (T731...
Page 31 - Button prgrming
23 P0603536 02 Modular ICS 6.1 Programming Record Photocopy pages before using. Button prgrming Enter the button programming information for each telephone in the appropriate table. Model M7100/T7100 Button Programming M7100/T7100 Prgrming All defaults B01 Last No. B01 B01
Page 33 - Model M7310 Button Programming
25 P0603536 02 Modular ICS 6.1 Programming Record Model M7310 Button Programming M7310 Prgrming Square Centrex Hybrid PBX DID B01 Line 1 Line <xx> Line 1 DND Line <xx> B02 Line 2 Transfer Line Pool Transfer Transfer B03 Call Fwd B04 Pickup B05 Page Link Page Page Page B06 Conf/Trans B07 ...
Page 35 - Model T7316 Button Programming
27 P0603536 02 Modular ICS 6.1 Programming Record Model T7316 Button Programming T7316 Prgrming Square Centrex Hybrid PBX DID B01 Line 1 Line <xx> Line 1 DND Line <xx> B02 Line 2 Transfer Line Pool Transfer Transfer B03 Call Fwd B04 Pickup B05 Page Link Page Page Page B06 Conf/Trans B07 ...
Page 36 - Model T7316E and KIM Button Programming
28 Modular ICS 6.1 Programming Record P0603536 02 Model T7316E and KIM Button Programming T7316E Prgrming Square Centrex Hybrid PBX DID B01 Contrast B02 Show Time B03 Privacy Blank Privacy Blank B04 Blank B05 SavNum redial Blank Sav Num redial Blank Sav Num redial B06 System Park Blank System Park B...
Page 37 - KIM module
29 P0603536 02 Modular ICS 6.1 Programming Record KIM module Note: MICS systems will support up to five central answering positions. This includes T7324 telephones with CAP modules andT7316E telephones with EKIMs. OKIM or EKIM KIM1 Prgrming KIM1 Prgrming KIM1 Prgrming B01 B09 B17 B02 B10 B18 B03 B11...
Page 38 - Model M7324 Button Programming and CAP Assignments
30 Modular ICS 6.1 Programming Record P0603536 02 Model M7324 Button Programming and CAP Assignments M7324 Prgrming Square Centrex Hybrid PBX DID B01 Line 1 Line <XX> Line 1 Line <XX> B02 Line2 Line Pool Transfer B03 B04 B05 B06 B07 B08 B09 B10 B11 B12 B13 Call Fwd B14 Speed Dial B15 Las...
Page 40 - User speed dial
32 Modular ICS 6.1 Programming Record P0603536 02 User speed dial (Terminals&Sets: User speed dial) Spd#(256-279) Speed dial number (max. 24 digits) Use prime line Pool code ____ Use line: ____ Use routing tabl
Page 41 - Restrictions; Restrn filters
33 P0603536 02 Modular ICS 6.1 Programming Record Restrictions (Terminals&Sets: Restrictions) Restrn filters (Terminals&Sets: Restrictions; Restrn filters) Restrn flt Restrn Default Overrides (Number) (Value) (Number) (Value) 00 No restrictions (only filter that cannot be changed) 01 01 0 02...
Page 44 - Set restrns
36 Modular ICS 6.1 Programming Record P0603536 02 Set restrns (Terminals&Sets; Restrictions; Set restrns) Line/set restrns (Terminals&Sets; Restrictions; Line/set restrns) Sets: (max. 7 digits) names (max. 7 char.) FiltersNormal 02 Night 11 Evening 12 Lunch 13 Sched 4 00 Sched 5 00 Sched 6 0...
Page 45 - Feature assignmnt
37 P0603536 02 Modular ICS 6.1 Programming Record Telco features (Terminals&Sets:Telco features) Feature assignmnt (Terminals&Sets;Telco features; Feature assignmnt) 1stDisplay (Terminals&Sets;Telco features;1st Display) Called ID (Terminals&Sets;Telco features;Called ID) Log space (...
Page 46 - If Target Line
38 Modular ICS 6.1 Programming Record P0603536 02 Photocopy pages before using. Lines Trunk/Line Data (Lines; Trunk/Line Data) If Target Line Trunk type(Profile 1 only) Loop E&M Ground DID BRI-STBRI-U2 BRI-U4PRI Fixed Loop E&M Ground DID BRI-STBRI-U2 BRI-U4PRI Fixed Loop E&M Ground DID B...
Page 47 - If T1 and Groundstart
39 P0603536 02 Modular ICS 6.1 Programming Record If T1 and Groundstart If T1 and Loopstart (Digital and Analog) Line no. (3 digits) Telephone number Trunk type Ground Ground Ground Ground Line type Public Private to: _______Pool _____ Public Private to: _______Pool _____ Public Private to: _______P...
Page 49 - If T1 and DID
41 P0603536 02 Modular ICS 6.1 Programming Record If T1 and DID (Profiles 1, 3 and 4 only) Line no. (3 digits) Telephone number Trunk type DID DID DID DID Line type Public Private to: _______Pool _____ Public Private to: _______Pool _____ Public Private to: _______Pool _____ Public Private to: _____...
Page 51 - If T1 and Fixed
43 P0603536 02 Modular ICS 6.1 Programming Record If PRI (ISDN) (Profiles 1 and 4 only) )If ETSI (Profiles 2 only) If T1 and Fixed (Profile 1 only) Name (Lines;Name) Line no. (3 digits) Telephone number(supplied by the CO) Trunk type PRI PRI PRI PRI Line type PRI-A PRI-B PRI-CPRI-D PRI-A PRI-B PRI-C...
Page 52 - Line restrns
44 Modular ICS 6.1 Programming Record P0603536 02 Restrictions Not available for Target lines. Restriction filter tables are provided under Terminals&Sets. Line restrns (Lines; Restrictions; Line restrns) Remote restrns (Lines; Restrictions; Remote restrns) Telco features (Lines; Telco features)...
Page 53 - Ringing service
45 P0603536 02 Modular ICS 6.1 Programming Record Photocopy pages before using. Services Ringing service (Services; Ringing Service/Ringing groups) (Maximum of 30 sets for each Ringing group)A=Assigned; U=Unassigned Ring grp: Ring grp: Ring grp: 221 A/U A/U A/U 221 A/U A/U A/U 221 A/U A/U A/U A/U A/...
Page 54 - Ringing Service
46 Modular ICS 6.1 Programming Record P0603536 02 Ringing Service (Services; Ringing Service) (continued) Restrn service (Services: Restrn service) Schedule 1 2 3 4 5 6 Schedule 1 2 3 4 5 6 Schedule 1 2 3 4 5 6 Ctrl set: 221 Ctrl set: 221 Ctrl set: 221 Service Off Auto Manual Service Off Auto Manual...
Page 55 - Routing service
47 P0603536 02 Modular ICS 6.1 Programming Record Routing service (Services; Routing service) Route #(001-999) DialOutno number or enter number Use pool(Pools PRI-A, PRI-B, are used with all profiles; PRI-C and PRI-D are only used by Pro-files 1 and 4) A B C D E F G H I J K L M N O PRI-A PRI-B PRI-C...
Page 56 - If service type requires service id
48 Modular ICS 6.1 Programming Record P0603536 02 If PRI-A, PRI-B, PRI-C, or PRI-D (Services; Routing service) (Profiles 1 and 4 only) If service type requires service id (Services; Routing service) (Profiles 1 and 4 only) If Protocol is SL-1 or TIE service type (Services; Routing service) (Profiles...
Page 57 - Dest codes
49 P0603536 02 Modular ICS 6.1 Programming Record Dest codes (Services; Routing service; Dest codes) Service Schedule Normal Rte 1 2 3 4 5 6 1 2 3 4 5 6 1 2 3 4 5 6 DstCode(max. 12 digits) Use route(001-999) Digit Absorb length First route(001-999) Digit Absorb length Second route(001-999) Digit Abs...
Page 59 - Activating routing schedules; Control sets
51 P0603536 02 Modular ICS 6.1 Programming Record Activating routing schedules (Services: Routing Service) Common settings (Services; Common settings) Control sets (Services; Common settings; Control sets) Schedule names (Services; Common settings; Schedule names) Schedule Schedule 1 Schedule 2 Sche...
Page 60 - Sys speed dial
52 Modular ICS 6.1 Programming Record P0603536 02 Photocopy pages before using. Sys speed dial Speed dial #: (001-255) Number to dial(max. 24 digits) PL = Use prime line PC = Line Pool code:RT = Use routing tabl:L = Use Line: ___ Display digits Name (max. 16 char.)Default is speed dial code By-pass ...
Page 61 - COS pswds
53 P0603536 02 Modular ICS 6.1 Programming Record Photocopy pages before using. Passwords COS pswds (Passwords; COS pswds) Pswd #(00-99) Assigned to(owner of password) Password(6 digits) User filter(2 digits) Line filter(2 digits) Remote pkg(00-15)
Page 62 - Call log paswds
54 Modular ICS 6.1 Programming Record P0603536 02 Call log paswds (Passwords; Call log pswds) Progrming pswds (Passwords; Progrming pswds) Hospitality (Passwords; Hospitality) SM Passwd (Passwords; System Monitor) Set: Log pswd Set: Log pswd Set: Log pswd Installer 266344 CONFIG Sys Coord+ 727587 SC...
Page 63 - Hunt groups
55 P0603536 02 Modular ICS 6.1 Programming Record Time&Date System prgrming Hunt groups (System prgrming: Hunt groups) Change DNs (System prgrming: Change DNs)(Record Change DNs on page 18.) Hour: 01 Minutes: 00 Year: 02 Month: 01 Day: 01 Group Name: (7 characters) Number: Members DN _______Appr...
Page 64 - Featr settings
56 Modular ICS 6.1 Programming Record P0603536 02 Featr settings (System prgrming; Featr settings) Direct-dial (System prgrming; Direct-dial) Background music Y N On hold Tones Music Silence Receiver volume Use sys volume Use set volume Camp timeout 30 45 60 90 120 150 180 300 600 Park timeout 30 45...
Page 65 - Dialing plan
57 P0603536 02 Modular ICS 6.1 Programming Record CAP/KIM assgn (System prgrming; CAP/KIM assgn) Allows lines to be assigned to a CAP or KIM module. Dialing plan (System prgrming; Dialing plan) Access codes (System prgrming; Access codes) (if D-Dial=Extrnl) Use Prime line Use line Pool code Use rout...
Page 67 - Remote access
59 P0603536 02 Modular ICS 6.1 Programming Record Remote access (System prgrming; Remote access) Remote access Pkg # Line pool access(Note that Line Pool access PRI-C and PRI-D are applicable to Profiles 1 and 4 only.) Remote page 00 Package 00 permits no access to line pools No 01(If PRI then PRI-A...
Page 69 - Hospitality; Network Services; ETSI
61 P0603536 02 Modular ICS 6.1 Programming Record Photocopy pages before using Hospitality (System prgrming; Hospitality) SM sets (Telco features; SM sets) Network Services ETSI (Profile 2, only) (software key required) (Network Services/ETSI) MCDN (Profile 1, 2, and 3, only) (software key required)...
Page 70 - ONN blocking
62 Modular ICS 6.1 Programming Record P0603536 02 Telco features VMSg ctr tel#s (Telco features; VMSg ctr tel#s) ONN blocking (Telco features; ONN blocking) VMsg center 1 VMsg center 2 VMsg center 3 VMsg center 4 VMsg center 5 line routing tbl line routing tbl line routing tbl line routing tbl line ...
Page 71 - SysID; Password keys; Password keys for ISDN PRI
63 P0603536 02 Modular ICS 6.1 Programming Record Software keys (Used to activate ISDN, PRI and MCDN SL-1 lines) SysID Companion ID Password keys (Software keys; Password keys) Password keys for ISDN PRI (Profiles 1 and 4 only) Password keys for fixed T1 lines (Profile 1 only) Password keys for Adva...
Page 72 - Cards on KSU; If card is a Loop card
64 Modular ICS 6.1 Programming Record P0603536 02 Hardware Cards on KSU (Profiles 1 and 4 only) (Profiles 2 and 3 only) If card is a Loop card If card is a T1 card Cd1-KSU Loop T1 PRI BRI-ST BRI-U2 BRI-U4 Cd2-KSU Loop T1 PRI BRI-ST BRI-U2 BRI-U4 Cd1-KSU Loop T1 BRI-2 BRI-ST Cd2-KSU Loop T1 BRI-2 BRI...
Page 73 - If card is a PRI card
65 P0603536 02 Modular ICS 6.1 Programming Record If card is a PRI card (Profiles 1 and 4 only) Card type PRI Lines Protocol protcl (Not shown if only one protocol available) NI-2 DMS100 DMS250 4ESS SL-1 (does not show unless MCDN is active) PrivNetIDrange: 1-127 30 BchanSeq(Default is Descend unles...
Page 74 - If card is an ETSI PRI card
66 Modular ICS 6.1 Programming Record P0603536 02 If card is an ETSI PRI card (Profile 2 only) If card is a DID card (Profiles 1, 3, and 4 only) If card is an E&M card If card is a BRI-U2, BRI-U4 or BRI-ST card (for Profiles 1 and 4 only) For S & LT only (for Profiles 1 and 4 only) Card type...
Page 76 - For T
68 Modular ICS 6.1 Programming Record P0603536 02 For S (for Profiles 2 and 3 only) For T (for Profiles 2 and 3 only) Modules (for Profile 1 only) MICS-XC (additional modules) Modules (for Profiles 2, 3 and 4 only) Sampling Adaptve Fixed Assign DNs Show DN:__ Assigned Availabl *LP ___ * LP ___ Loop ...
Page 78 - TrunkMod
70 Modular ICS 6.1 Programming Record P0603536 02 TrunkMod (Profiles 1 and 4 only) (BRI cards and off-core DTI cartridges a re available on Modules 03 and 04 on midi systems, and on Modules07 and 08 for maxi systems.)(MICS-XC systems: TrunkMod cannot be configured for Modules 09-14.) Cd1-Mod3 Loop E...
Page 81 - System version
73 P0603536 02 Modular ICS 6.1 Programming Record Maintenance System version (Maintenance; System version) System Version Port/DN Status SP: Device: Device: Device: Device: Device: Device: Device: Device: Device: Device: Device: Device: Device: Device: Device: Device: Device: Device: Device: Device:...
Page 82 - Sys test log
74 Modular ICS 6.1 Programming Record P0603536 02 Sys test log (Maintenance; Sys test log) Sys Test Log Log item Time of log item Number of repetitions
Page 84 - Network evt log
76 Modular ICS 6.1 Programming Record P0603536 02 Network evt log (Maintenance; Network evt log) Network Log Log item Time of log item Number of repetitions Time and date that log was checked
Page 85 - Template specific defaults; MICS-XC Norstar-Companion Installer Guide; Terminals&Sets defaults
77 P0603536 02 Modular ICS 6.1 Programming Record Template specific defaults For the Norstar MICS 6.1 system, the Square template is the default template. The Centrex, Hybrid, PBX and DID template are also available as an option at startup. For the Norstar MICS-XC 6.1 system, the PBX template is the...
Page 86 - Lines defaults
78 Modular ICS 6.1 Programming Record P0603536 02 Telco features (Feature assignmnt) Lines defaults Trunk/Line data (Target lines) Trunk/Line data (Digital and Analog loopstart) Setting Square Centrex Hybrid PBX DID Call log set N Y Set 221:Yother sets:N N default target line: Y other lines: N Extl ...
Page 89 - Services defaults; Access codes
81 Modular ICS 6.1 Programming Record P0603536 02 Restrictions Services defaults Access codes Setting Square Centrex Hybrid PBX DID Restrn flt 00 No restrictions (cannot be changed) Restrn flt 01 Restr’n 01Restr’n 02 Override 001Override 002Override 003 Restr’n 03 Override 001 Restr’n 04Restr’n 05Re...
Page 90 - Glossary of programming headings and settings; Menu item
81 P0603536 02 Modular ICS 6.1 Programming Record Glossary of programming headings and settings This section presents the programming hierarchy in the Norstar Modular ICS/Modular ICS-XC interface. The dots each represent alevel below the top level Top Level Level 1 • Level 2 •• Level 3 ••• Below the...
Page 99 - LIST
90 Modular ICS 6.1 Programming Record P0603536 02 ••• Restrn filters These are sets or groups of restrictions and associated overrides that specify the external numbers or feature codes that cannot be dialed from a telephone or line. •••• Show filter:_ Enter the two-digit filter number. ••••• Restrn...
