Miele 11827180 - User Manual

Warning and Safety instructions 6 Safety with children  Older children may only use the vacuum cleaner without supervi- sion if they have been shown how to use it in a safe manner. Chil-dren must be able to understand and recognise the possible dangerscaused by incorrect operation.  Young children...

Warning and Safety instructions 7 Technical safety  The vacuum cleaner operates at 25.2 V. It is classified as a class III appliance.This appliance is supplied by a safety extra-low voltage (SELV)power source where the voltage is low enough to protect users fromthe risk of electrical shock. A Class...

Warning and Safety instructions 8  Repairs and other work by unqualified persons can cause consid- erable danger to users.  If the vacuum cleaner is to be stored unused for a long period, the battery should be removed.  The supply terminals must not be short-circuited. Correct use  Do not use th...

Warning and Safety instructions 10 Technical safety  The AP01/AP02/AP03 battery, the LG01/LG02 charger and the LS03 charger cradle are designed for use with the Miele HS19 va-cuum cleaner. For safety reasons, the vacuum cleaner must not beused with a battery, charger or charger cradle produced by a...

Warning and Safety instructions 11  Charging with a self-sufficient or non-mains synchronous energy supply system (e.g. isolated networks, back-up systems) is possible.A requirement for charging is that the energy supply system com-plies with all current local and national requirements that apply t...

Warning and Safety instructions 13 Cleaning  Do not immerse the vacuum cleaner or any accessories supplied with it in water.  The Multi Floor XXL Electrobrush and the Electro Compact hand- held brush (depending on the model), the PowerUnit, the suctiontube and the Comfort handle contain electrical...

Caring for the environment 16 Disposing of the packagingmaterial The packaging material is used forhandling and protects the appliancefrom transport damage. The packagingmaterial used is selected from materialswhich are environmentally friendly fordisposal and can generally be recycled. Recycling th...

Installation and connection 18 Assembling the vacuumcleaner You can assemble the vacuum cleanerin 2 different ways.  You can place the suction tube eitherabove or below the PowerUnit. Take care to assemble the vacuumcleaner exactly as shown in the dia-gram. The advantages of placing the PowerUnit a...

Installation and connection 21 Inserting the battery  Push the battery along the guide linesuntil it audibly clicks into place in thePowerUnit.  If you want to separate the sectionsagain, press both release catches atthe side of the battery to remove thebattery. Connecting the Electrobrush Dependi...

Installation and connection 22 General battery information The rechargeable battery is suppliednot fully charged.Charge the battery completely beforeusing it for the first time. Allow approx-imately 4 hours for this.To activate the battery, it is essential toplace it in the PowerUnit when chargingit...

Installation and connection 23 Charging the battery (with wallmounting) There are 2 ways to store and chargethe vacuum cleaner in the supplied wallbracket. Before charging the battery for the firsttime, you must read the information in“Installation and connection – Generalbattery information”. You w...

Installation and connection 24 Attaching the mounting plate 2 plugs and 2 T20 TORX screws aresupplied for attaching the mountingplate to the wall.You will also need a battery-operatedscrewdriver or a drill (with a drilling dia-meter of 6 mm). Depending on how you decide to con-figure your vacuum cle...

Installation and connection 26 Connecting the wall bracket  Slide the wall bracket down into themounting plate from above until itaudibly clicks into place.  Slide the PowerUnit of the fully as-sembled vacuum cleaner, with thebattery inserted, down into the wallbracket from above.  Plug the charg...

Using the supplied accessories 28 Miele offers a range of suitable ac-cessories for many special applica-tions (see “Optional accessories”).  Upholstery nozzle XL Accessory for cleaning upholstery,mattresses and cushions  Crevice nozzle Accessory for cleaning in folds,crevices or corners  Dusting...

Using the supplied accessories 29 Multi Floor XXL Electrobrush Follow the flooring manufacturer’scleaning and care instructions.  Damage caused by trapped ma- terial.Risk of the flooring gettingscratched.Make sure that there is no coarse dirtor debris trapped in the bottom ofthe Electrobrush, e.g. ...

Use 33 Switching on and off  If you have charged the battery in thewall bracket, take the vacuum cleanerout of the wall bracket.  If you have charged the battery dir-ectly, unplug the charger from thecharging socket on the bottom of thebattery. For the best possible cleaning results,always activat...

Use 34 Illuminating the work area (depending on model)The Electrobrush on your vacuumcleaner is equipped with BrilliantLight toilluminate the work area. Self-standing function for shortpauses in vacuuming (For safety reasons, this function canonly be used when the PowerUnit is fit-ted at the bottom ...

Maintenance 35  Risk of injury caused by rotating roller brush.You can injure yourself on the rotat-ing roller brush.Switch the vacuum cleaner off beforedoing any maintenance work. Usethe On/Off switch on the Comforthandle to do this. We recommend using only genuineMiele accessories bearing the “OR...

Maintenance 36 Filter system  Fine dust filter (HX FSF-2)  Pre-filter  Dust container d Dust container flap Activating the ComfortCleanfunction Always run the interim cleaning functionfor the fine dust filter before emptyingthe dust container. You should also runit whenever the suction power begi...

Maintenance 37 Emptying the dust container Empty the dust container at the latestwhen the dust has reached the MAX marking on the dust container.  Turn the lid of the dust container inthe direction of the arrow as far asthe first stop. Use the grey grippingsurfaces to help you do this.  Lift the d...

Maintenance 40  Reinsert the pre-filter in the dust con-tainer.  To do this, line up the guides (arrows)and turn the pre-filter back to its ori-ginal position.  Close the dust container flap, makingsure it clicks into place.  Reattach the dust container to thePowerUnit connector. Cleaning the du...

Error messages 42  Risk of injury caused by rotating roller brush. You can injure yourself on the rotating roller brush.Switch the vacuum cleaner off before dealing with any problems. Use the On/Off switch on the Comfort handle to do this. Error messages are displayed with a quick flashing light on...

Problem solving guide 43 With the help of the following guide, minor faults in the performance of the appli-ance, some of which may result from incorrect operation, can be remedied withoutcontacting Miele. This will save you time and money because you won't need aservice call. Please note that a cal...

Service 46 Contact in case of malfunction In the event of any faults which youcannot remedy yourself, please contactMiele. Contact information for Miele can befound at the end of this document. Please note that telephone calls may bemonitored and recorded for trainingpurposes and that a call-out cha...

Cleaning and care 47  Risk of injury caused by rotating roller brush.You can injure yourself on the rotat-ing roller brush.Always switch the vacuum cleaneroff before cleaning it. Use the On/Offswitch on the Comfort handle to dothis. Vacuum cleaner and accessories  Risk of electric shock from mains...

Optional accessories 48 Follow the flooring manufacturer’scleaning and care instructions. We recommend using only genuineMiele accessories bearing the “ORI-GINAL Miele” logo on the packaging.Only these will guarantee the optimumperformance of your vacuum cleanerand the best possible cleaning results...

Electrical connection 50 All work should be carried out by a suit-ably qualified and competent person instrict accordance with national andlocal safety regulations. The voltageand rated load are given on the dataplate located underneath the vacuumcleaner. Please ensure that these matchthe household ...

Miele Head Office Melbourne: Level 4, 141 Camberwell RoadHawthorn East, VIC 3123 Miele Experience Centre South Melbourne: 206-210 Coventry StreetSouth Melbourne, VIC 3205 Miele Experience Centre and Office Sydney: 3 Skyline PlaceFrenchs Forest, NSW 2086 Miele Experience Centre and Office Brisbane: T...