Page 2 - IMPORTANT SAFETY INSTRUCTIONS; Verify Line Voltage Before Use; which your product is intended can create a safety and fire hazard; Handle the AC Power Cord Gently; modification to the product will void your warranty. If water
2 2 IMPORTANT SAFETY INSTRUCTIONS Verify Line Voltage Before Use The JBL Bar 1000 (soundbar, detachable speakers and subwoofer) has been designed for use with 100-240 volt, 50/60 Hz AC current. Connection to a line voltage other than that for which your product is intended can create a safety and fi...
Page 3 - TABLE OF CONTENTS
3 3 www.jbl.com English 7.6 PLAY THROUGH CHROMECAST BUILT-IN 19 7.7 PLAY THROUGH AIRPLAY 20 7.8 PLAY THROUGH AMAZON MUSIC 20 7.9 MULTI-ROOM PLAYBACK 21 8. SOUND SETTINGS 22 8.1 AUDIO SYNC 22 8.2 SMART MODE 22 8.3 PUREVOICE DIALOGUE ENHANCEMENT TECHNOLOGY 22 9. RESTORE FACTORY SETTINGS 22 10. SOFTWAR...
Page 4 - Designs and specifications are subject to change without notice.; JBL One app; Connection with your home; Subscription may be needed and not provided by the JBL One app.
4 4 1. INTRODUCTION Thank you for purchasing the JBL Bar 1000 (soundbar, detachable speakers and subwoofer) which is designed to bring an extraordinary 3D sound experience to your home entertainment system. We encourage you to take a few minutes to read through this manual, which describes the produ...
Page 5 - Side caps; WHAT’S IN THE BOX; Soundbar; * Power cord quantity and plug type vary region.
5 5 www.jbl.com English HDMI cable (1.2 m/3.9 ft.) Side caps (For the soundbar) (For the detachable speakers) Wall-mounting kit x 2 x 2 x 2 x 2 x 6 x 2 x 6 x 2 Product information & wall-mounting template 2. WHAT’S IN THE BOX Unpack the box carefully and ensure that the following parts are inclu...
Page 6 - Detachable speakers; ) Type C USB connector
6 6 3.1.2 Rear connectors 1 2 3 5 4 1) POWER • Connect to power (with the supplied power cord) 2) USB • USB connector for software update • Connect to a USB storage device for MP3 file playback (for US version only) 3) ETHERNET • Connect to your home network through an Ethernet cable 4) HDMI IN (1/ ...
Page 7 - Connected to the soundbar; TV
7 7 www.jbl.com English 3.3 Subwoofer 1 2 1) • Connection status indicator Solid (white) Connected to the soundbar Fast flashing (white) Pairing mode Slow flashing (white) Reconnecting or exiting the pairing mode Solid (amber) Standby mode 2) Power connector • Connect to power (with the supplied pow...
Page 8 - Desktop placement; flat and stable surface. Refer to the recommended distance in; The power cord shall be properly connected to power.
8 8 (available when both of the detachable rear speakers are undocked from the soundbar)• Select the surround sound level for rear speakers: middle (default), high, muted or low 4) CALIBR • Press to start sound calibration 5) (Moment) • Press to directly access the playlist or speaker settings that ...
Page 9 - b) Use your ballpen tip to mark the screw holder location.; Make sure that the wall can support the weight of the soundbar.; surround speakers
9 9 www.jbl.com English 4.2 Wall-mounting Wall-mount the soundbar and detachable rear speakers together or separately. 4.2.1 Wall-mount the soundbar 5 1 2 ≤8 mm/ 0.31 " 4mm/0.16 " ≥30 mm/1.18" 4 3 555.7 mm / 21.88” 1a) 1b) 1c) > 50 mm/2’’ 1. Preparation: a) With the distance of about ...
Page 10 - HDMI
10 10 5. CONNECT 5.1 Connection with your TV and digital devices For audio playback through the soundbar, connect the soundbar with your TV through the supplied HDMI cable or an optical cable (sold separately). An HDMI connection supports digital audio and video with a single connection. HDMI connec...
Page 11 - With the 4 up-firing speakers and the detachable surround speaker; Full compatibility with all HDMI-CEC devices is not guaranteed.
11 11 www.jbl.com English 5.1.2 TV (HDMI eARC) HDMI (eARC) HDMI IN * HDMI OUT HDMI (eARC) HDMI IN * HDMI OUT TV TV TV TV 1. Connect the soundbar with the HDMI IN (eARC) connector on your TV by using the supplied HDMI cable.• On your TV, check that HDMI-CEC and HDMI ARC / eARC have been enabled. Refe...
Page 12 - Bluetooth connection; if your device is named in English. A confirmation tone; To reconnect the last paired device; If the device has ever been paired with the soundbar, first; Connection with your home network
12 12 5.2 Bluetooth connection Through Bluetooth, connect the soundbar with your Bluetooth device, such as a smartphone, tablet and laptop. Settings Bluetooth Bluetooth DEVICES JBL Bar 1000_xxxx Now Discoverable Connected < 10 m / 33 ft BT PAIRING 5.2.1 Connect a Bluetooth device 1. To select Blu...
Page 13 - Play through AirPlay; Connect the detachable rear speakers and; “LOAD”; Use the supplied power cords only.
13 13 www.jbl.com English 3. If necessary, use an Ethernet cable to connect the soundbar to your home network. • Make sure that you connect to the same network as you did during the setup. NOTES: − On your Android or iOS device, you can name the soundbar in the JBL One app. − On your iOS device, add...
Page 14 - Detachable speakers; D surround sound; When the battery power runs low, the status indicator flashes; Charge by docking the detachable speakers
14 14 6.2.2 Charge through a USB cable 100% USB-C * • Use a USB-C cable to connect the detachable speakers to power respectively. • For the detachable speakers, the status indicator is used for status indication of both battery power and wireless connection (See “ 3.2 Detachable speakers ”). NOTES: ...
Page 15 - CALIBR; detachable rear speakers and subwoofer
15 15 www.jbl.com English 2) Calibrate the speaker position L R L R 2 PRESS CALIBR AGAIN CALIBRATING 2-CALIBRATION 2-DONE CALIBRATING 2-CALIBRATION 2-DONE 1. Place the detachable rear speakers in your desired location. 2. On the remote control, press CALIBR . J “2-CALIBRATION” is displayed on the so...
Page 17 - “HELLO”; On the detachable speakers, press and hold; Play from the TV source; Connection with your TV and digital
17 17 www.jbl.com English 7. PLAY 7.1 Power-on/Auto standby/Auto wakeup HELLO 7.1.1 Switch on • To switch on, press any button on the soundbar, or on the remote control. J “HELLO” is displayed. J The subwoofer is reconnected to the soundbar automatically. Connected : turns solid white. J The detacha...
Page 18 - Play from the HDMI IN source; Connection with your; Play from the Bluetooth source; Bluetooth connection; Play through the JBL One app
18 18 HDMI-CEC If your TV supports HDMI-CEC, enable the functions as instructed in your TV user manual. You can control the volume +/-, mute/unmute, and power on/standby functions on your soundbar through the TV remote control. TV remote control IR learning Through IR learning, your Infra-red TV rem...
Page 19 - Access your presets with the (Moment) button
19 19 www.jbl.com English 2. On your Android or iOS device, a) Check that your Android or iOS device has been connected to the same network as the soundbar. b) Launch the JBL One app, browse available *music streaming services to select music, and then, start music streaming to the connected soundba...
Page 20 - Play through AirPlay; Play through Amazon Music; Connection with your home network
20 20 c) On a Chromecast-enabled app, play music, tap the cast icon and select the connected soundbar. CHROMECAST 3. To exit from the music playback, switch to other sources. 7.7 Play through AirPlay Through AirPlay, stream audio on your iOS device to the soundbar. 1. On the soundbar, • Check that t...
Page 21 - Through the Google Home app, connect multiple
21 21 www.jbl.com English 7.9 Multi-room playback With the multi-room playback, you can stream music on your Android or iOS device to multiple Chromecast-enabled/ AirPlay / Alexa speakers. 7.9.1 Chromecast built-in 1. Through the Google Home app, connect multiple Chromecast-enabled speakers to the s...
Page 22 - Within five seconds, press; PureVoice dialogue enhancement; for more than five; RESTORE FACTORY SETTINGS
22 22 8. SOUND SETTINGS 8.1 Audio sync With the audio sync function, you can synchronize audio and video to make sure that no delay is heard from your video content.1. On the remote control, press and hold TV for more than three seconds and then, press . J “SYNC” is displayed. 2. Within five seconds...
Page 23 - receive more information about downloading update files.; Check that you have saved the software update file to the
23 23 www.jbl.com English 10. SOFTWARE UPDATE For optimal product performance and your best user experience, JBL may offer software updates for the soundbar system in the future. Please visit www.jbl.com or contact JBL call center to receive more information about downloading update files. Updating ...
Page 24 - To re-enter the subwoofer pairing mode; turns from fast flashing white; PRODUCT SPECIFICATIONS; General specification:
24 24 11. RE-CONNECT THE SUBWOOFER The soundbar and subwoofer are paired at factories. After power-on, they are paired and connected automatically. In some special cases, you may need to pair them again. 3S SUB PAIRING 5S To re-enter the subwoofer pairing mode 1. On the rear panel of subwoofer, pres...
Page 25 - System; FACTORY SETTINGS; Sound; Bluetooth device
25 25 www.jbl.com English 13. TROUBLESHOOTING Never try to repair the product yourself. If you have problems using this product, check the following points before you request services. System The unit will not turn on.• Check if the power cord is plugged into power and the soundbar. The soundbar has...
Page 26 - If you have difficulties in setting up Wi-Fi, hold; Playback; AirPlay cannot find the soundbar as an AirPlay speaker for
26 26 Remote control The remote control does not work.• Check if the batteries are drained. If so, replace them with new ones. • Reduce the distance and angle between the remote control and the main unit. Failed to complete the TV remote control learning.• Check if you are using an infra-red TV remo...
Page 27 - The Bluetooth
27 27 www.jbl.com English 14. TRADEMARKS The Bluetooth ® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by HARMAN International Industries, Incorporated is under license. Other trademarks and trade names are those of their respective owners. The ...
Page 28 - OPEN SOURCE LICENSE NOTICE
28 28 15. OPEN SOURCE LICENSE NOTICE This product contains open source software licensed under GPL. For your convenience, the source code and relevant build instruction are also available at https://harman-webpages.s3.amazonaws.com/JBL_BAR_Gen3_package_license_list.htm . Please feel free to contact ...
