Field Controls 20+UL - Manual
Field Controls 20+UL – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – INSTALLATION; ONNECTING; If there is an overflow; WIRING
- Page 3 – ESTING; MAINTENANCE; ERVICING OF A DOUBLE
- Page 4 – REPLACEMENT ITEMS; PART NUMBER; TROUBLESHOOTING; F THE UNIT DOES NOT FUNCTION PROPERLY; Check the power supply.; Figure 4
- Page 5 – POMPE À CONDENSAT; Modèle; ACCORDEMENT; S’il y a un tuyau de trop-plein à partir du; CÂBLAGE
- Page 6 – EST; Mettre l’appareil sous tension pour qu’il fonctionne.; ENTRETIEN; NTRETIEN D; Retirer la pompe tout entière de son support mural.; Schéma 3
- Page 7 – OUR NETTOYER LE CLAPET DE RETENUE ET VÉRIFIER SON FONCTIONNEMENT; Retirer la ligne de décharge du clapet de retenue.; PIÈCES DE RECHANGE; Numéro De Pièce; DÉPANNAGE; I L; Vérifier l’alimentation électrique.; Schéma 4
- Page 8 – Bomba de Condensado; INSTALACIÓN; ONEXIÓN; Si hay un desagüe de rebose desde la bandeja; CABLEADO
- Page 9 – RUEBAS; Active el aparato para que marche.; MANTENIMIENTO; ERVICIO A UN APARATO DE AISLAMIENTO DOBLE; Saque toda la bomba de la pared de montaje.; Figura 3
- Page 10 – PIEZAS DE REPUESTO; Pieza Número; LOCALIZACIÓN DE FALLAS; I LA UNIDAD NO FUNCIONA CORRECTAMENTE; Figura 4
- Page 11 – WARRANTY INFORMATION
CONDENSATE PUMP
Model:
20+
The Field Controls Condensate Pumps are designed to automatically
remove the liquid from an air conditioner evaporative coil and/or a gas
condensing warm air furnace. This pump is made from a tough ABS
plastic so it will resist corrosion and impacts.
I
TEMS
I
NCLUDED
1) UL & cUL Listed Condensate Pump with 6' power cord
1) Check Valve to prevent backflow of liquid into the unit
1) Overflow Safety Switch
(Models 20+ULS and 20+ULST only)
1) 20 Feet of 3/8" I.D. Plastic Tubing
(Models 20+ULT and
1) Instruction Sheet
ULST only)
MODELS AVAILABLE
MODEL
VOLTAGE
CURRENT
PART
NUMBER
DESCRIPTION
20+UL
115VAC/60Hz
1.45 Amps
46296901
Base Model
20+ULS
115VAC/60Hz
1.45 Amps
46296902
Base Model with Overflow Safety Switch
20+ULT
115VAC/60Hz
1.45 Amps
46296903
Base Model with 20’ Flexible Tubing
20+ULST
115VAC/60Hz
1.45 Amps
46296904
Base Model with Overflow Safety Switch and 20’
Flexible Tubing
20+ULS 220/60
115VAC/60Hz
1.45 Amps
46296906
Base Model with Overflow Safety Switch
S
PECIFICATIONS
WARNING
: For indoor use only. This pump is not submersible.
FLOW
HEAD (ft)
5
1
85
5
70
10
45
15
0
20
DO NOT DESTROY
THESE INSTRUCTIONS MUST REMAIN WITH EQUIPMENT
English ...... Page 1
Français..... Page 5
Espanõl ..... Page 8
Certification:
UL & cUL Listed
Weight:
3.25 lbs
Dimensions:
11" X 5" X 4-3/4"
Tank Capacity:
2 qts. Total
Motor Ratings:
ThermallyProtected,
Double Insulated
Enclosure
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Page 2 INSTALLATION 1. Carefully unpack the unit. Check for damage and make sure all of the required parts are included. The units are thoroughly tested before packing to insure safe delivery and operation. If there is any sign of damage due to shipment return it to the place of purchase for repair ...
Page 3 T ESTING 1. With the unit plugged in and the discharge line in place, pour water into the pump reservoir until the unit activates to verify the unit works. 2. To test the overflow safety circuit (Models 20+ULS and 20+ULST only): a. Energize the appliance so it runs. b. Kink the tube coming fr...
Page 4 REPLACEMENT ITEMS The following items are available for replacement. Refer to Figure 4 for guidance in locating and assembling replacement parts. PART NUMBER DESCRIPTION 46297800 Main Float and Switch Assembly 46297900 Overflow Float and Switch Assembly 46298000 Check Valve* 46298100 Impeller...
