Chicago Electric Model 97641 - Manual
Chicago Electric Model 97641 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – sPeciFicatiOns; save this manual; GeneRaL saFetY RuLes; ReaD anD unDeRstanD aLL instRuctiOns; WORk aRea; keep your work area clean and well lit.; Cluttered benches and dark areas invite; keep bystanders and children away while operating Lamp.; Distractions can
- Page 3 – eLectRicaL saFetY; and refrigerators.; PeRsOnaL saFetY; use safety equipment. always wear eye protection.; tOOL use anD caRe; use the correct tool for your application.
- Page 4 – seRVice; sPeciFic saFetY RuLes
- Page 5 – Replace Lamp guard before plugging in.; extensiOn cORDs; Grounded
- Page 6 – RecOmmenDeD minimum WiRe GauGe FOR extensiOn cORDs*; namePLate; tabLe a; sYmbOLOGY; unPackinG
- Page 7 – assembLY instRuctiOns; the Assembly Diagram near the end of this manual.; Figure a; The Casters do not come with locks, so be sure to position the; Figure b
- Page 9 – OPeRatiOn instRuctiOns; keep fingers and all objects clear of Lamp at all times. When
- Page 10 – PaRts List; Part; PLease ReaD tHe FOLLOWinG caReFuLLY
- Page 11 – assembLY DiaGRams
- Page 12 – LimiteD 90 DaY WaRRantY; which vary from state to state.; Record; individually as replacement parts.
1200W Paint DRYinG LamP
model
97641
assembLY anD OPeRatiOn instRuctiOns
Diagrams within this manual may not be drawn proportionally.
Due to continuing improvements, actual product may differ slightly from the product described herein.
Distributed exclusively by Harbor Freight Tools
®
.
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our website at: http://www.harborfreight.com
Read this material before using this product.
Failure to do so can result in serious injury.
SaVe THiS manual.
Copyright
©
2008 by Harbor Freight Tools
®
. All rights reserved. No portion of this
manual or any artwork contained herein may be reproduced in any shape or form
without the express written consent of Harbor Freight Tools.
For technical questions or replacement parts, please call 1-800-444-3353.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Page 2 SKU 97641 For technical questions, please call 1-800-444-3353. sPeciFicatiOns Electrical Requirements Single Phase 120V, 60Hz, 1200 WOverall Dimensions 39-3/4” L x 39-3/4” W x 74-1/4” (H) Bulb 125 VAC infrared bulb with (1) heating element; 32” L Max. Temp. 350° F save this manual You will ne...
Page 3 SKU 97641 For technical questions, please call 1-800-444-3353. eLectRicaL saFetY Grounded tools must be plugged into an outlet properly installed and grounded 1. in accordance with all codes and ordinances. never remove the grounding prong or modify the plug in any way. Do not use any adapter...
Page 4 SKU 97641 For technical questions, please call 1-800-444-3353. Disconnect the Power cord Plug from the power source before making any 3. adjustments, changing accessories, or storing the tool. Such preventive safety measures reduce the risk of starting the tool accidentally. always unplug the...
