Chicago Electric Model 97641 - Manuals

Page 2 - sPeciFicatiOns; save this manual; GeneRaL saFetY RuLes; ReaD anD unDeRstanD aLL instRuctiOns; WORk aRea; keep your work area clean and well lit.; Cluttered benches and dark areas invite; keep bystanders and children away while operating Lamp.; Distractions can

Page 2 SKU 97641 For technical questions, please call 1-800-444-3353. sPeciFicatiOns Electrical Requirements Single Phase 120V, 60Hz, 1200 WOverall Dimensions 39-3/4” L x 39-3/4” W x 74-1/4” (H) Bulb 125 VAC infrared bulb with (1) heating element; 32” L Max. Temp. 350° F save this manual You will ne...

Page 3 - eLectRicaL saFetY; and refrigerators.; PeRsOnaL saFetY; use safety equipment. always wear eye protection.; tOOL use anD caRe; use the correct tool for your application.

Page 3 SKU 97641 For technical questions, please call 1-800-444-3353. eLectRicaL saFetY Grounded tools must be plugged into an outlet properly installed and grounded 1. in accordance with all codes and ordinances. never remove the grounding prong or modify the plug in any way. Do not use any adapter...

Page 4 - seRVice; sPeciFic saFetY RuLes

Page 4 SKU 97641 For technical questions, please call 1-800-444-3353. Disconnect the Power cord Plug from the power source before making any 3. adjustments, changing accessories, or storing the tool. Such preventive safety measures reduce the risk of starting the tool accidentally. always unplug the...

Page 5 - Replace Lamp guard before plugging in.; extensiOn cORDs; Grounded

Page 5 SKU 97641 For technical questions, please call 1-800-444-3353. Replace Lamp guard before plugging in. 9. WaRninG: this product contains or, when used, produces a chemical known to 10. the state of california to cause cancer and birth defects or other reproductive harm. (California Health &...

Page 6 - RecOmmenDeD minimum WiRe GauGe FOR extensiOn cORDs*; namePLate; tabLe a; sYmbOLOGY; unPackinG

Page 6 SKU 97641 For technical questions, please call 1-800-444-3353. RecOmmenDeD minimum WiRe GauGe FOR extensiOn cORDs* (120 OR 240 VOLt) namePLate amPeRes (at full load) extensiOn cORD LenGtH 25 Feet 50 Feet 75 Feet 100 Feet 150 Feet 0 – 2.0 18 18 18 18 16 2.1 – 3.4 18 18 18 16 14 3.5 – 5.0 18 18...

Page 7 - assembLY instRuctiOns; the Assembly Diagram near the end of this manual.; Figure a; The Casters do not come with locks, so be sure to position the; Figure b

Page 7 SKU 97641 For technical questions, please call 1-800-444-3353. assembLY instRuctiOns note: For additional information regarding the parts listed in the following pages, refer to the Assembly Diagram near the end of this manual. 1. WaRninG! Make sure the Power Switch on the Lamp Head (9) is in...

Page 9 - OPeRatiOn instRuctiOns; keep fingers and all objects clear of Lamp at all times. When

Page 9 SKU 97641 For technical questions, please call 1-800-444-3353. OPeRatiOn instRuctiOns Read the drying directions for the type of paint being used. Multiple layers of 1. paint may effect proper drying time. The object to be dried should be placed between 12” and 20” from the Lamp. 2. Refer to ...

Page 10 - PaRts List; Part; PLease ReaD tHe FOLLOWinG caReFuLLY

Page 10 SKU 97641 For technical questions, please call 1-800-444-3353. PaRts List Part Description Qty 1 Bottom Pole 1 2 Legs 4 3 Casters 4 4 Leg Bolts M8 x 85 4 5 Top Pole 1 6 Connector 1 7 Connector Bolt M8 x 40 1 8 Wing Nut 1 9 Lamp Head 1 10 Power Cord 1 11 Washer Ø8 1 12 Fixing Handle 1 13 Bolt...

Page 11 - assembLY DiaGRams

Page 11 SKU 97641 For technical questions, please call 1-800-444-3353. assembLY DiaGRams

Page 12 - LimiteD 90 DaY WaRRantY; which vary from state to state.; Record; individually as replacement parts.

Page 12 SKU 97641 For technical questions, please call 1-800-444-3353. LimiteD 90 DaY WaRRantY Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in material...