Chicago Electric 92455 - Manual
Chicago Electric 92455 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – WORK AREA; Keep your work area clean and well lit.; ELECTRICAL SAFETy; READ AND UNDERSTAND ALL INSTRUCTIONS; UNPACKING; Parts Lists on
- Page 6 – HEART PACEMAKER PRECAUTION; SPECIFIC PRODUCT WARNINGS AND PRECAUTIONS; INSTALLATION PRECAUTIONS
- Page 7 – FIRE AND EXPLOSION PRECAUTIONS
- Page 8 – make sure the Power Switch is in its “OFF” position. Disconnect the; CHEMICAL PRECAUTIONS
- Page 9 – If an extension cord (not included) is used, make sure to use only UL; FIGURE A
- Page 10 – Insulate all connections and disconnected wires.; INSTALLATION; The Generator weighs 103.6 pounds. Use care and the proper; GENERAL LOCATION
- Page 11 – Assembly Diagrams; Check to make sure the Engine’s Power Switch (2) is in its; “OFF”; To do so, unscrew and remove the Engine’s Oil Dipstick (65A) located; upper marked line; stick back into the Oil Fill Hole.
- Page 13 – plugged in to the Generator.; “ON”
- Page 15 – Powering 120 Volt AC Tools And Equipment:; Powering 12 Volt DC Tools And Equipment:
- Page 16 – Start and run the Engine as previously discussed in this manual.; The Generator features a 10 AMP DC Fuse (9) to protect the DC circuit; FIGURE H; inspect the general condition of the Generator. Check for loose
- Page 17 – Do not use damaged equipment.; Follow all maintenance procedures as outlined in the; Engine Maintenance Sched-; check to make sure the Engine’s oil level is adequate. If neces-; Engine Maintenance Schedule; Interval; Details
- Page 18 – able individually as replacement parts.; PARTS LIST
- Page 19 – ASSEMbLy DIAGRAM
- Page 20 – PARTS LIST - CONTINUED
- Page 21 – ASSEMbLy DIAGRAM - CONTINUED
- Page 22 – WIRING DIAGRAM
- Page 23 – YEAr; Emission Control System Warranty; Harbor Freight Tools Emission Control; Owner’s Warranty Responsibilities
GENERATOR SET
5.5 HP - RECOIL START - 2200W/2400W RATED
Model 92455
OPERATING INSTRUCTIONS
®
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our Web site at http://www.harborfreight.com
Copyright
©
2004 by Harbor Freight Tools
®
. All rights reserved. No portion
of this manual or any artwork contained herein may be reproduced in any
shape or form without the express written consent of Harbor Freight Tools.
For technical questions and replacement parts, please call 1-800-444-3353
TO PREVENT SERIOUS INjURy OR DEATH,
READ AND UNDERSTAND ALL WARNINGS
AND INSTRUCTIONS bEFORE USE.
REV 03/06
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
SKU 92455 For technical questions, please call 1-800-444-3353. Page 3 WORK AREA 1. Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents. 2. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Generato...
SKU 92455 For technical questions, please call 1-800-444-3353. Page 6 HEART PACEMAKER PRECAUTION SPECIFIC PRODUCT WARNINGS AND PRECAUTIONS 1. WARNING! People with pacemakers should consult their physician(s) be- fore using this product. Electromagnetic fields in close proximity to a heart pace-maker...
SKU 92455 For technical questions, please call 1-800-444-3353. Page 7 1. Gasoline fuel and fumes are flammable, and potentially explosive. Use proper fuel storage and handling procedures. Always have multiple ABC class fire extin-guishers nearby. 2. Keep the Generator and surrounding area clean at a...
