Chicago Electric 96035 - Manuals

Chicago Electric 96035 – Manual in PDF format online.

Manuals:

Manual

Manual Chicago Electric 96035

Summary

Page 2 - saVe tHis manual; Keep this manual for the safety warnings; important saFetY; general power tool safety warnings; The term ′′power tool′′ in the warnings; the presence of flammable liquids,; Power tools create

Page 2 For technical questions, please call 1-800-444-3353. SKU 96035 saVe tHis manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram...

Page 3 - the risk of electric shock.; under the influence of drugs, alcohol; Safety

Page 3 For technical questions, please call 1-800-444-3353. SKU 96035 a power tool will increase the risk of electric shock. do not abuse the cord. never use c. the cord for carrying, pulling or unplugging the power tool. keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangl...

Page 4 - from those intended could result in a; qualified repair person using only; This will; breaker Hammer safety warnings; can cause hearing loss.

Page 4 For technical questions, please call 1-800-444-3353. SKU 96035 maintain power tools. check for e. misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. if damaged, have the power tool repaired before use. Many accidents ...

Page 5 - Vibration safety; saVe tHese

Page 5 For technical questions, please call 1-800-444-3353. SKU 96035 chemicals known [to the State of California] to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: • Lead from lead-based paints • Crystalline silica from bricks and cement or other mason...

Page 6 - grounding; Check with a qualified electrician; grounded tools: tools with three; -prong plug and outlet; extension cords; Grounded

Page 6 For technical questions, please call 1-800-444-3353. SKU 96035 grounding to preVent electric sHock and deatH From incorrect grounding wire connection: Check with a qualified electrician if you are in doubt as to whether the outlet is properly grounded. do not modify the power cord plug provid...

Page 7 - cord or have it repaired by a qualified; symbology

Page 7 For technical questions, please call 1-800-444-3353. SKU 96035 If you are using one extension cord for 5. more than one tool, add the nameplate amperes and use the sum to determine the required minimum cord size. (see table a.) If you are using an extension cord 6. outdoors, make sure it is m...

Page 8 - speciFications; unpacking; When unpacking, make sure that the

Page 8 For technical questions, please call 1-800-444-3353. SKU 96035 speciFications Electrical Input 120 V~ / 60 Hz / 15 A Blows Per Minute 1030 BPM Tool Mount Spring-Loaded Rotational Lock Chisel 1 Bull Point (Included) Weight 77 lb. unpacking When unpacking, make sure that the item is intact and ...

Page 9 - read the entire important; For additional information regarding the; assembly; The only assembly required for the; First, slide Left Handle over the Spline; manipulating Left Handle over the Spline

Page 9 For technical questions, please call 1-800-444-3353. SKU 96035 instructions For putting into use read the entire important saFetY inFormation section at the beginning of this manual including all text under subheadings therein before set up or use of this product. to preVent serious injurY Fr...

Page 10 - installing a chisel; Chisels come with or without collars.; Figure 1; Flat; Figure 1a; the Chisel with the flat on top of the; Figure 1b; When the Chisel is installed, there will

Page 10 For technical questions, please call 1-800-444-3353. SKU 96035 installing a chisel Chisels come with or without collars. Figure 1 shows installation of a chisel without a collar (the included chisel is without a collar). Figure 2 shows installation of a chisel with a collar. note: If the Chi...

Page 11 - Figure 2; Pull the retaining ring open about 30-

Page 11 For technical questions, please call 1-800-444-3353. SKU 96035 with a collar: Retaining Ring Figure 2 1. Pull the retaining ring open about 30- 40° to the second engaging position as shown in Figure 2. Insert the collared chisel. 2. Return the retaining ring to its original 3. position to lo...

Page 12 - operating instructions; work piece and work area set up; at the beginning of each use. This warm-; only use sharp tipped chisels.

Page 12 For technical questions, please call 1-800-444-3353. SKU 96035 operating instructions read the entire important saFetY inFormation section at the beginning of this manual including all text under subheadings therein before set up or use of this product. work piece and work area set up Design...

Page 13 - Brushes by a qualified technician.; Grasp the handles firmly with both hands; important - replacing carbon; qualified service technician.

Page 13 For technical questions, please call 1-800-444-3353. SKU 96035 Clearly mark the work area. 1. Plug in the Breaker Hammer. 2. Place the Chisel on the block you will be 3. breaking. note: carbon brushes (51) will wear during use. the breaker Hammer will cease functioning if the brushes are wor...

Page 14 - When removing Left Handle,

Page 14 For technical questions, please call 1-800-444-3353. SKU 96035 Figure 3 Nut (91) Left Handle (92) Figure 6 3. Use a Wrench to loosen the Nut (91) holding the Left Handle (92) in place. See Figure 6. Figure 7 Spline Axle (27) Left Handle (92) 4. caution: When removing Left Handle, do not pull...

Page 15 - Left Handle and fasten that into place

Page 15 For technical questions, please call 1-800-444-3353. SKU 96035 Figure 10 Carbon Brush (52) Carbon Brush Holder (53) Wire Fixing Board (50) Carbon Brush Holder Spring 7. Remove the Wire Board from the top of the Carbon Brush Holder (53). Then use tip of flat-edge screwdriver (not included) to...

Page 16 - Procedures not specifically; lubrication; inspect the; breaker Hammer will cease operation; Wipe tool with a lint-free cloth after each; warning! if the supply cord of

Page 16 For technical questions, please call 1-800-444-3353. SKU 96035 maintenance and serVicing Procedures not specifically explained in this manual must be performed only by a qualified technician. to preVent serious injurY From accidental operation: release the trigger and unplug the tool from it...

Page 17 - troubleshooting; problem; disconnect power supply before service.

Page 17 For technical questions, please call 1-800-444-3353. SKU 96035 troubleshooting problem possible causes likely solutions Tool will not start. Cord not connected. 1. No power at outlet. 2. Tool’s thermal reset breaker 3. tripped (if equipped). Internal damage or wear. 4. (Carbon brushes or Tri...

Page 18 - parts list

Page 18 For technical questions, please call 1-800-444-3353. SKU 96035 please read tHe Following careFullY THE MANUFACTURER ANd/OR dISTRIBUTOR HAS PROvIdEd THE PARTS LIST ANd ASSEMBLy dIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLy. NEITHER THE MANUFACTURER OR dISTRIBUTOR MAkES ANy REPRESENTATION OR...

Page 19 - assemblY drawing

Page 19 For technical questions, please call 1-800-444-3353. SKU 96035 assemblY drawing 56 57 58 59 60 61 1 2 4 5 6 7 8 9 10 44 45 46 47 48 49 50 51 52 53 54 55 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 88 87 86 89 90 79 80 81 82 83 84 85 42 43 30 31 32 33 34 35 36 37 38 39 40 41 13 14 22 2...

Page 20 - limited 90 daY warrantY; Harbor Freight Tools Co. makes every effort

Page 20 For technical questions, please call 1-800-444-3353. SKU 96035 record product’s serial number Here: note: If product has no serial number, record month and year of purchase instead. note: Some parts are listed and shown for illustration purposes only, and are not available individually as re...