Chicago Electric 94882 - Manual
Chicago Electric 94882 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – You will need this manual for the safety warnings and precautions,; GENERAL SAFETY RULES; READ AND UNDERSTAND ALL INSTRUCTIONS; WORK AREA; Keep your work area clean and well lit.
- Page 5 – PAGE 5; GROUNDED TOOLS: TOOLS WITH THREE PRONG PLUGS; Service; section of this manual.; Use; GROUNDING
- Page 6 – PAGE 6; FIGURE A; Standard Association, and the National Electrical Code.; FIGURE B
- Page 7 – PAGE 7; EXTENSION CORDS; can use either a two or three wire extension cord.; FIGURE C
- Page 8 – PAGE 8; SYMBOLOGY; SPECIFIC SAFETY RULES; Maintain labels and nameplates on the Breaker Hammer.; These carr y; Industrial applications must follow OSHA requirements.; Before using this product, carefully check that it will
- Page 9 – VIBRATION HAzARD; Wear suitable gloves to reduce the vibration effects on the user.
- Page 10 – PAGE 10; UNPACKING; When unpacking, check to make sure all parts shown on the; Parts; on pages 12-14 are included. If any parts; ASSEMBLY INSTRUCTIONS; How to attach and adjust the Side Handle:; See
- Page 11 – PAGE 11; OPERATING INSTRUCTIONS; IMPORTANT - READ BEFORE USE; How to Adjust the impact level of the Breaker Hammer; Lock Pin 4
- Page 12 – Always disconnect the Breaker Hammer from its electri-
- Page 13 – PARTS LIST; PART NAME
- Page 14 – PARTS LIST CONTINUED; PLEASE READ THE FOLLOWING CAREFULLY
- Page 15 – PAGE 15; ASSEMBLY DIAGRAM
- Page 16 – PAGE 16; LIMITED 90 DAY WARRANTY; which vary from state to state.
BREAKER HAMMER
Model 94882
ASSEMBLY AND OPERATING INSTRUCTIONS
Diagrams within this manual may not be drawn proportionally.
Due to continuing improvements, actual product may differ slightly from the product described herein.
Distributed exclusively by Harbor Freight Tools
®
.
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our website at: http://www.harborfreight.com
Read this material before using this product.
Failure to do so can result in serious injury.
SaVe THiS manual.
Copyright
©
2006 by Harbor Freight Tools
®
. All rights reserved. No portion of this
manual or any artwork contained herein may be reproduced in any shape or form
without the express written consent of Harbor Freight Tools.
For technical questions or replacement parts, please call 1-800-444-3353.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
SKU 94882 PAGE 2 PRODUCT SPECIFICATIONS SAVE THIS MANUAL You will need this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures, parts list and assembly diagram. Keep your invoice with this manual. Write the invoice number on the insid...
SKU 94882 PAGE 5 WARNING! Improperly connecting the grounding wire can result in the risk of electricshock. Check with a qualified electrician if you are in doubt as to whether the outlet is properly grounded. Do not modify the power cord plug provided withthe tool. Never remove the grounding prong ...
SKU 94882 PAGE 6 FIGURE A DOUBLE INSULATED TOOLS: TOOLS WITH TWO PRONG PLUGS 4. Tools marked “Double Insulated” do not require grounding. They have a special double insulation system which satisfies OSHA requirements and complies with the applicable standards of Underwriters Laboratories, Inc., the ...
