Chicago Electric 96375 - Manual
Chicago Electric 96375 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – SpecificationS; Save this Manual; general Safety ruleS; read and underStand all inStructionS; work area; keep your work area clean and well lit.; Cluttered benches and dark areas invite; keep children and visitors away while operating this tool.; Distractions can
- Page 3 – electrical Safety; do not expose power tools to rain or wet conditions.; perSonal Safety; do not overreach. keep proper balance at all times.
- Page 4 – tool uSe and care; do not force the tool. use the correct tool for your application.; SerVice; section of this manual.; Specific Safety ruleS; Maintain labels and nameplates on the tool.
- Page 5 – always keep the extension cord away from heated parts of the tool.; et seq; grounding; grounded toolS: toolS witH tHree prong plugS
- Page 6 – -prong plug and outlet; extenSion cordS; peres and use the sum to determine the required minimum cord size.
- Page 7 – recoMMended MiniMuM wire gauge for extenSion cordS*; naMeplate; table a; SyMbology; unpacking; the Assembly Diagram near the end of this manual.
- Page 8 – operation inStructionS; preparing the metal to be soldered
- Page 9 – not; to the Soldering Tip.; Soldering tips
- Page 10 – Some solders contain lead and some do not. Be extremely; replacing the Soldering tip; Make sure the Power Switch of the tool is in its “OFF” position and
- Page 11 – do not use damaged equipment.; pleaSe read tHe following carefully
- Page 12 – partS liSt and aSSeMbly diagraM; part; record; individually as replacement parts.
Soldering Station
Model
96375
aSSeMbly and operation inStructionS
Due to continuing improvements, actual product may differ slightly from the product described herein.
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our website at: http://www.harborfreight.com
to preVent SeriouS injury, read and underStand
all warningS and inStructionS before uSe.
Copyright
©
2007 by Harbor Freight Tools
®
. All rights reserved. No portion of this
manual or any artwork contained herein may be reproduced in any shape or form
without the express written consent of Harbor Freight Tools.
for technical questions or replacement parts, please call 1-800-444-3353.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Page 2 SKU 96375 for technical questions, please call 1-800-444-3353. SpecificationS Construction Formed/Stamped Steel Plate & Sheet High Impact Thermoplastic UnitSteel Bar Rubber/Thermoplastic GripCopper Wiring Finish Black Thermoplastic & Rubber Coating Overall Dimensions Station: 6-3/4” L...
Page 3 SKU 96375 for technical questions, please call 1-800-444-3353. electrical Safety grounded tools must be plugged into an outlet properly installed and grounded in accordance with all codes and ordinances. never remove the grounding prong or modify the plug in any way. do not use any adapter pl...
Page 4 SKU 96375 for technical questions, please call 1-800-444-3353. tool uSe and care use clamps (not included) or other practical ways to secure and support the workpiece to a stable platform. Holding the work by hand or against your body is unstable and may lead to loss of control. do not force ...
