Chicago Electric 96035 - Manual
Chicago Electric 96035 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – saVe tHis manual; Keep this manual for the safety warnings; important saFetY; general power tool safety warnings; The term ′′power tool′′ in the warnings; the presence of flammable liquids,; Power tools create
- Page 3 – the risk of electric shock.; under the influence of drugs, alcohol; Safety
- Page 4 – from those intended could result in a; qualified repair person using only; This will; breaker Hammer safety warnings; can cause hearing loss.
- Page 5 – Vibration safety; saVe tHese
- Page 6 – grounding; Check with a qualified electrician; grounded tools: tools with three; -prong plug and outlet; extension cords; Grounded
- Page 7 – cord or have it repaired by a qualified; symbology
- Page 8 – speciFications; unpacking; When unpacking, make sure that the
- Page 9 – read the entire important; For additional information regarding the; assembly; The only assembly required for the; First, slide Left Handle over the Spline; manipulating Left Handle over the Spline
- Page 10 – installing a chisel; Chisels come with or without collars.; Figure 1; Flat; Figure 1a; the Chisel with the flat on top of the; Figure 1b; When the Chisel is installed, there will
- Page 11 – Figure 2; Pull the retaining ring open about 30-
- Page 12 – operating instructions; work piece and work area set up; at the beginning of each use. This warm-; only use sharp tipped chisels.
- Page 13 – Brushes by a qualified technician.; Grasp the handles firmly with both hands; important - replacing carbon; qualified service technician.
- Page 14 – When removing Left Handle,
- Page 15 – Left Handle and fasten that into place
- Page 16 – Procedures not specifically; lubrication; inspect the; breaker Hammer will cease operation; Wipe tool with a lint-free cloth after each; warning! if the supply cord of
- Page 17 – troubleshooting; problem; disconnect power supply before service.
- Page 18 – parts list
- Page 19 – assemblY drawing
- Page 20 – limited 90 daY warrantY; Harbor Freight Tools Co. makes every effort
2.5 Horsepower industrial
breaker Hammer kit
model
96035
set up and operating instructions
Visit our website at: http://www.harborfreight.com
read this material before using this product.
Failure to do so can result in serious injury.
saVe tHis manual.
Copyright
©
2007 by Harbor Freight Tools
®
. All rights reserved. No portion of this manual or any artwork
contained herein may be reproduced in any shape or form without the express written consent of
Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein. Tools required for
assembly and service may not be included.
For technical questions or replacement parts, please call 1-800-444-3353.
revised manual 10e
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Page 2 For technical questions, please call 1-800-444-3353. SKU 96035 saVe tHis manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram...
Page 3 For technical questions, please call 1-800-444-3353. SKU 96035 a power tool will increase the risk of electric shock. do not abuse the cord. never use c. the cord for carrying, pulling or unplugging the power tool. keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangl...
Page 4 For technical questions, please call 1-800-444-3353. SKU 96035 maintain power tools. check for e. misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. if damaged, have the power tool repaired before use. Many accidents ...
