Chicago Electric 94678 - Manual
Chicago Electric 94678 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – specifications; save this Manual; This product requires oil and fuel to be added before
- Page 4 – General safety rules; work area
- Page 5 – use safety equipment. always wear eye protection.; equipMent use and care; Maintain equipment with care.; serVice
- Page 6 – section of this; specific safety rules; Maintain labels and nameplates on the generator.
- Page 7 – installation precautions; hold the weight of the Generator.; fire and eXplosion precautions; Gasoline fuel and fumes are flammable, and potentially explosive.
- Page 8 – MecHanical precautions; do not operate the Generator with safety guards removed.; While the Generator; electrical precautions; insulate all connections and disconnected wires.; Do not touch electrically en-; keep all electrical equipment clean and dry.; Replace any wiring where the; keep all electrical cords away from moving parts on the generator.
- Page 9 – installation instructions; If powering exceeds the Generator’s capacity, it may be necessary; General location
- Page 10 – assembly diagrams on pages 16 and 18
- Page 11 – Make sure the electrical tools/equipment that will be used; are not; plugged in to; to power 110/120 Volt ac tools and equipment:; When finished using the Generator, turn the ON/OFF Switch (52a) to its; “off”
- Page 12 – If the battery is
- Page 13 – do not use damaged equipment.
- Page 14 – Maintenance cHart; troublesHootinG; problem
- Page 16 – asseMbly diaGraM - enGine
- Page 17 – parts list a - Generator; please read tHe followinG carefully
- Page 18 – asseMbly diaGraM a - Generator; record; individually as replacement parts.
- Page 20 – warranted parts; warranty; lIMIteD 1 yeAR
2.5 Horsepower
Gas enGine Generator
94678
installation and operation instructions
Due to continuing improvements, actual product may differ slightly from the product described herein.
Distributed exclusively by
Harbor Freight Tools
®
.
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our website at: http://www.harborfreight.com
to preVent serious injury, read and understand
all warninGs and instructions before use.
Copyright
©
2006 by Harbor Freight Tools
®
. All rights reserved. No portion of this
manual or any artwork contained herein may be reproduced in any shape or form
without the express written consent of Harbor Freight Tools.
for technical questions or replacement parts, please call 1-800-444-3353.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Page 3 SKU 94678 for technical questions, please call 1-800-444-3353. specifications Generator Type Brushless / Revolving Field / Self Exciting / Two Pole / Single Phase Wattage 1,000 / 1,050 (Continuous-Rated/Peak) Electrical Output 110/120 V~, 60 Hzabout 18 V (12 V battery charging) Electrical Sup...
Page 4 SKU 94678 for technical questions, please call 1-800-444-3353. General safety rules warninG! read and understand all instructions failure to follow all instructions listed below may result in electric shock, fire, and/or serious injury. saVe tHese instructions work area keep your work area cl...
Page 5 SKU 94678 for technical questions, please call 1-800-444-3353. remove adjusting keys or wrenches before turning the equipment on. A wrench or a key that is left attached to a rotating part of the equipment may result in personal injury. do not overreach. keep proper footing and balance at all...
