Chicago Electric 94282 - Manual
Chicago Electric 94282 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – SAVE THIS MANUAL; GENERAL SAFETY RULES; READ AND UNDERSTAND ALL INSTRUCTIONS; WORK AREA; Keep your work area clean and well lit.; Cluttered benches and dark areas invite; PRODUCT SPECIFICATIONS
- Page 3 – ELECTRICAL SAFETY; Do not expose power tools to rain or wet conditions.; PERSONAL SAFETY; Avoid accidental starting.
- Page 4 – TOOL USE AND CARE; Do not force the tool. Use the correct tool for your application.; SERVICE; section of this manual.
- Page 5 – SPECIFIC SAFETY RULES
- Page 6 – Use extra care when cleaning on stairways.; Do not expose the Vacuum Blower to rain.; Store the unit indoors.; SAVE THESE INSTRUCTIONS
- Page 7 – GROUNDING; outlet installed by a qualified electrician.; GROUNDED TOOLS: TOOLS WITH THREE PRONG PLUGS; FIGURE A
- Page 9 – RECOMMENDED MINIMUM WIRE GAUGE FOR EXTENSION CORDS*; NAMEPLATE; FIGURE C; SYMBOLOGY
- Page 10 – ASSEMBLY INSTRUCTIONS; Always make sure the Power Switch (2) of the Vacuum Blower is; “OFF”; To Attach The Wheel Casters:; FIGURE E; wet; UNPACKING; When unpacking, check to make sure all the parts shown on the; Parts List on page; the number shown on the cover of this manual as soon as possible.
- Page 11 – vacuuming. To install the Dust Bag, insert; dry; vacuuming. To install the Dry Filter, first; FIGURE F; OPERATING INSTRUCTIONS; Make sure the Power Switch (2) of the Vacuum Blower is in its; Then turn the Power Switch (2) of the Vacuum Blower to its; “ON”; position to begin
- Page 12 – frequently; blower
- Page 13 – Make sure the Power Switch (2) of the Vacuum Blower is in its; inspect the general condition of the Vacuum Blower. Check for; Do not use damaged equipment.; empty the Tank (15) of the unit and check to make sure the Foam; CAUTION! All maintenance, service, or repairs not mentioned in this
- Page 14 – PLEASE READ THE FOLLOWING CAREFULLY
- Page 15 – ASSEMBLY DIAGRAM
- Page 16 – LIMITED 90 DAY WARRANTY
WET/DRY VACUUM BLOWER
5 GAL. CAPACITY
Model 94282
ASSEMBLY AND OPERATING INSTRUCTIONS
Do to continuing improvements, actual product may differ slightly from the product described herein.
®
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our Web site at: http://www.harborfreight.com
TO PREVENT SERIOUS INJURY,
READ AND UNDERSTAND ALL WARNINGS
AND INSTRUCTIONS BEFORE USE.
Copyright
©
2006 by Harbor Freight Tools
®
. All rights reserved. No portion of this manual or
any artwork contained herein may be reproduced in any shape or form without the express
written consent of Harbor Freight Tools.
For technical questions, please call 1-800-444-3353.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
SKU 94282 For technical questions, please call 1-800-444-3353 PAGE 2 SAVE THIS MANUAL You will need this manual for the safety warnings and precautions, assembly, operat- ing, inspection, maintenance and cleaning procedures, parts list and assembly diagram. Keep your invoice with this manual. Write ...
SKU 94282 For technical questions, please call 1-800-444-3353 PAGE 3 ELECTRICAL SAFETY Grounded tools must be plugged into an outlet properly installed and grounded in accordance with all codes and ordinances. Never remove the grounding prong or modify the plug in any way. Do not use any adapter plu...
SKU 94282 For technical questions, please call 1-800-444-3353 PAGE 4 Do not overreach. Keep proper footing and balance at all times. Proper footing and balance enables better control of the power tool in unexpected situations. Use safety equipment. Always wear eye protection. Dust mask, non-skid saf...
