Chicago Electric 93188 - Manual
Chicago Electric 93188 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – SPECIFICATIONS; SAVE THIS MANUAL; READ AND UNDERSTAND ALL INSTRUCTIONS; Work Area; Keep your work area clean and well lit.; Cluttered benches and dark areas invite accidents.
- Page 3 – Electrical Safety; Do not expose power tools to rain or wet conditions.; Personal Safety; Do not overreach. Keep proper footing and balance at all times.
- Page 4 – SPECIFIC SAFETY RULES FOR THIS PRODUCT
- Page 6 – GROUNDING; GROUNDED TOOLS: TOOLS WITH THREE PRONG PLUGS; FIGURE A; DOUBLE INSULATED TOOLS: TOOLS WITH TWO PRONG PLUGS
- Page 7 – ExTENSION CORDS; Grounded
- Page 8 – RECOMMENDED MINIMUM WIRE GAUGE FOR ExTENSION CORDS*; NAMEPLATE; FIGURE C; SYMBOLOGY
- Page 9 – OPERATING INSTRUCTIONS; Cleaner, as well as its operation and application.; Operational Components and Controls; Motor; The; Motor Direction Switch; The Motor is controlled by a; Foot Switch; The Foot Switch is in a rubber boot
- Page 10 – Select and Attach Proper Cutting Tool; Cutter Tool
- Page 11 – Drain Cleaning Operation; Place the Drain Cleaner within two feet of the drain pipe inlet.; Do not; After the drain pipe has been opened, return the cable to the Drum.
- Page 12 – OPERATING TIPS; TROUBLESHOOTING; Problem; Allow motor to cool off com-
- Page 14 – Make sure the Power Switch of the Drain Cleaner is in its “OFF”; General; Do not use; Periodically recheck all nuts, bolts, and screws for tightness.; Auto Feed Maintenance; Flushing with water,; If disassembly is required, proceed
- Page 15 – PLEASE READ THE FOLLOWING CAREFULLY; Guide Wheel Replacement; need replacement. Replace all three Guide Wheels at the same time.; Tangled Cable; cause the Cable to tangle in the Drum.
- Page 16 – MAIN UNIT PARTS LIST
- Page 17 – MAIN UNIT ASSEMBLY DRAWING
- Page 18 – 4-4A Axle for Press Wheel
- Page 19 – LIMITED 1 YEAR WARRANTY; vary from state to state.
50 FT. DRAIN CLEANER
WITH POWER FEED
93188
ASSEMBLY AND OPERATING INSTRUCTIONS
Distributed exclusively by Harbor Freight Tools
®
.
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our website at: http://www.harborfreight.com
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
Copyright
©
2006 by Harbor Freight Tools
®
. All rights reserved. No portion of this manual or any artwork contained
herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may
differ slightly from the product described herein. Tools required for assembly and service may not be included.
For technical questions or replacement parts, please call 1-800-444-3353.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Page 2 SKU 93188 For technical questions, please call 1-800-444-3353 SPECIFICATIONS Construction Formed and Welded Steel with Heavy Duty Motor and Steel Drum Features Forward / Reverse GearsAluminum Friction ClutchCable Lockdown Electric Motor Heavy Duty 120 V~ 1/3 HP1785 RPM Power Required 120 V~ /...
Page 3 SKU 93188 For technical questions, please call 1-800-444-3353 Electrical Safety Avoid body contact with grounded surfaces such as pipes, radiators, ranges, and 1. refrigerators. There is an increased risk of electric shock if your body is grounded. Do not expose power tools to rain or wet con...
Page 4 SKU 93188 For technical questions, please call 1-800-444-3353 Use safety equipment. Always wear eye protection. 6. Dust mask, nonskid safety shoes, hard hat, or hearing protection must be used for appropriate conditions. Tool Use and Care Do not force the tool. Use the correct tool for your a...
