Chicago Electric 94336 - Manual
Chicago Electric 94336 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – SAVE THIS MANUAL; IMpORTANT SAFETY; SAFETY WARNINGS AND; Read all instructions before using; flammable gases or liquids.
- Page 4 – WARNING; SpEcIFIcATIONS
- Page 5 – darkening filter lens before welding.; SHADE GUIDE cHART
- Page 6 – OpERATION; is started, the filter screen automatically
- Page 7 – TROUbLESHOOTING; Darkening Welding Helmet; immediately if any of the; above-mentioned problems; MAINTENANcE; REpLAcING THE LENS cOVER
- Page 8 – Tab; Remove the protection film from both; Do not try to open the Auto-
- Page 9 – Welding Helmet; pARTS LIST AND ASSEMbLY DIAGRAM; *Includes Delay and Sensitivity Dials/Switches; Q’ty
- Page 10 – LIMITED 90 DAY WARRANTY; merchandise. If our inspection verifies
AUTO-DARKENING WELDING HELMET
with ANSI-Approved Lens
Models
91212, 91214, 94336, 94337
SET Up AND OpERATING INSTRUcTIONS
NOTE: YOUR Helmet may appear different from the Helmet pictured in this
manual.
Aside from the slight differences noted in this manual, the warnings,
operation instructions, and maintenance procedures will remain the same.
Distributed exclusively by Harbor Freight Tools
®
.
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our website at: http://www.harborfreight.com
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
Copyright
©
2006 by Harbor Freight Tools
®
. All rights reserved. No portion of this manual or any artwork
contained herein may be reproduced in any shape or form without the express written consent of Harbor
Freight Tools. Diagrams within this manual may not be drawn proportionally. Tools required for assembly
and service may not be included.
For technical questions or replacement parts, please call 1-800-444-3353.
Manual revised 10c
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Page 2 For technical questions, please call 1-800-444-3353. Auto-darkening Welding Helmet SAVE THIS MANUAL Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near ...
Page 4 For technical questions, please call 1-800-444-3353. Auto-darkening Welding Helmet Do not make any modifications to • either the Auto-Darkening Filter or the rest of the helmet, other than those specified in this manual. Do not use any replacement parts other than those specified in this manu...
Page 5 For technical questions, please call 1-800-444-3353. Auto-darkening Welding Helmet UNpAcKING When unpacking, make sure that the item is intact and undamaged. If any parts are missing or broken, please call Harbor Freight Tools at 1-800-444-3353 as soon as possible. bEFORE FIRST USE The Auto-D...
