Chicago Electric 91511 - Manuals

Chicago Electric 91511 – Manual in PDF format online.

Manuals:

Manual

Manual Chicago Electric 91511

Summary

Page 2 - READ AND UNDERSTAND ALL INSTRUCTIONS; UNPACKING; When unpacking, check to make sure all the parts shown on the; Parts List on page 17; Item

PRODUCT SPECIFICATIONS SAVE THIS MANUAL You will need this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures, parts list and assembly diagram. Keep your invoice with this manual. Write the invoice number on the inside of the front co...

Page 3 - WORK AREA

3. Keep bystanders, children, and visitors away while operating a power tool. Distractions can cause you to lose control. Protect others in the work area from debris such as chips and sparks. Provide barriers or shields as needed. PERSONAL SAFETY 1. Stay alert. Watch what you are doing, and use comm...

Page 4 - SERVICE; may create a risk of electric shock or injury.; grounding prong or modify the plug in any way. Do not use any adapter; ELECTRICAL SAFETY

2. Do not use the power tool if the Power Switch does not turn it on or off. Any tool that cannot be controlled with the Power Switch is dangerous and must be replaced. 3. Disconnect the Power Cord Plug from the power source before making any adjustments, changing accessories, or storing the tool. S...

Page 5 - three wire grounded power cord and grounded power supply system.; Do not expose power tools to external rain or wet conditions. Water; Damaged Power Cords increase the risk of electric shock.; When operating a power tool outside, use an outdoor extension cord; reduce the risk of electric shock.; GROUNDING; outlet installed by a qualified electrician.

2. Double insulated tools are equipped with a polarized plug (one prong is wider than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install a polarized ou...

Page 6 - FIGURE A; EXTENSION CORDS; can use either a two or three wire extension cord.

resistance path to carry electricity away from the user, reducing the risk of electric shock. (See Figure A.) 2. The grounding prong in the plug is connected through the green wire inside the cord to the grounding system in the tool. The green wire in the cord must be the only wire connected to the ...

Page 7 - FIGURE B; SYMBOLOGY; FIGURE C

5. If you are using one extension cord for more than one tool, add the nameplate amperes and use the sum to determine the required minimum cord size. (See Figure B.) 6. If you are using an extension cord outdoors, make sure it is marked with the suffix “W-A” (“W” in Canada) to indicate it is accepta...

Page 8 - SPECIFIC SAFETY RULES; any other part of the Saw, in all angles and depths of cut.

SPECIFIC SAFETY RULES 1. Maintain labels and nameplates on the Wet Tile Saw. These carry important information. If unreadable or missing, contact Harbor Freight Tools for a replacement. 2. DANGER! Keep hands and fingers away from cutting area and Saw Blade. Use a appropriate push stick (not included...

Page 10 - WARNING! People with pacemakers should consult their physician(s); ASSEMBLY INSTRUCTIONS; To Remove And Install The Saw Blade:; WARNING! Prior to performing any assembly procedures, make sure; it in a

SKU 91511 PAGE 10 25. WARNING! People with pacemakers should consult their physician(s) before using this product. Electromagnetic fields in close proximity to a heart pacemaker could cause interference to or failure of the pacemaker. 26. WARNING! Some dust created by power sanding, sawing, grinding...

Page 11 - Saw Blade with a; FIGURE D; To Attach The Saw Blade Guard:

SKU 91511 PAGE 11 Saw Blade (6) from the Spindle of the Wet Tile Saw. Then, install a new diamond Saw Blade with a 7” diameter, 5/8” round arbor hole, and rated at a minimum 3,600 RPM. (See Figure D.) 6. NOTE: When installing the new Saw Blade (6), make sure the directional arrow shown on the Saw Bl...

Page 12 - OPERATING INSTRUCTIONS; Left Cutting Table.; DO NOT plug it into an electrical outlet.

SKU 91511 PAGE 12 3. Check to make sure the Blade Guard (2) moves freely upward and downward. (See Figure D.) 4. Close the Left Side Cutting Table (26). (See Figure D.) To Attach The Fence And Miter Guide:1. Place the Fence (11) on top of the Right Cutting Table (10) and clamp both ends of the Fence...

Page 13 - Make sure the Power Switch (21) is in its; To Perform Straight Cutting:; “OFF” position, and; To Perform Angle Cutting:; “OFF” position. Then, plug the Power; FIGURE F

SKU 91511 PAGE 13 3. Make sure the Power Switch (21) is in its “OFF” position. Then, plug the Power Cord (17) into the nearest 120 volt, grounded, electrical outlet. (See Figure G.) To Perform Straight Cutting: 1. Lift the front and rear Levers of the Fence (11). Slide the Fence along the Table to t...

Page 14 - FIGURE G; hold the Cutting Table in position.; To Perform Miter Cutting:

SKU 91511 PAGE 14 FIGURE G WORKPIECE (NOT INCLUDED) FENCE (11) FENCE SCALE FENCE LEVER FENCE LEVER POWER SWITCH (21) 2. Raise the Right Cutting Table (10) to the desired angle of cut (i.e., 15°, 30°, 45°, or 60° ). (See Figure next page.) 3. Place the two Stands underneath the Right Cutting Table (1...

Page 15 - FIGURE H; (0° to 60°) and tighten the Lock Knob to lock the Miter Guide in place.

SKU 91511 PAGE 15 FIGURE H RIGHT CUTTING TABLE (10) WORKPIECE (NOT INCLUDED) POWER SWITCH (21) STAND (0° to 60°) and tighten the Lock Knob to lock the Miter Guide in place. (See Figure I.) 3. Place the workpiece flush against the Miter Guide (24). Turn the Power Switch (21) toits “ON” position, and ...

Page 16 - Do not use damaged equipment.; PLEASE READ THE FOLLOWING CAREFULLY

INSPECTION, MAINTENANCE, AND CLEANING 1. WARNING! Always make sure the Power Switch (21) is in its “OFF” position, and unplug the Power Cord (17) from its 120 volt electrical outlet before performing any inspection, adjustments, maintenance, or cleaning. 2. Before each use, inspect the general condi...

Page 18 - LIMITED 1 yEAR / 90 DAy WARRANTy; WarranTy iS expreSSly in lieu oF all oTHer WarranTieS, expreSS or

SKU 91511 PAGE 18 LIMITED 1 yEAR / 90 DAy WARRANTy Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that for a period of ninety days from date of purchase that the engine/motor, the belts (if so...