Chicago Electric 96531 - Manual
Chicago Electric 96531 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – contents
- Page 3 – saVe this Manual; iMportant saFetY inForMation; DANgEr
- Page 4 – general saFetY rules; The term “power tool” in all of the warnings listed
- Page 5 – use safety equipment. always wear eye protection.; Safety equipment; power tool use and care; Do not use the power tool if the switch does not turn it on and off.; Disconnect the plug from the power source and from the power tool; Such preventive safety measures reduce the risk of starting the; service; cal replacement parts.
- Page 6 – speciFic saFetY rules; et seq; saVe these instructions.; grounDing; improperly connecting grounding wire can result in electric; WArNINg
- Page 7 – grounded tools: tools with three prong plugs; -prong plug and outlet; Double insulated tools: tools with two prong plugs; Grounded
- Page 8 – recoMMenDeD MiniMuM Wire gauge For eXtension corDs*
- Page 9 – symbology; speciFications; unpacking; on the cover of this manual as soon as possible.; list of contents; set up instructions
- Page 10 – to the Assembly Diagram near the end of this manual.; assembly; 20V AC electrical outlet.; Functions; The Digital Soldering Station is designed to heat; operating instructions; read the entire iMportant saFetY inForMation section at the; tool set up
- Page 11 – Work piece set up; the solder’s directions) to perform the soldering operation.; never use acid core; the joint which you are soldering.; general operating instructions
- Page 12 – Maintenance anD serVicing; risk of serious personal injury from accidental starting or
- Page 13 – inspect the general condition of the tool. Check for dam-; Warning! if the supply cord of this power tool is damaged, it must be; Tip cannot heat up properly when cracked or eroded.; replacing the Fuse; replace cover and screw back into place.
- Page 14 – parts list & asseMblY DiagraM; part
- Page 15 – liMiteD 90 DaY WarrantY; WArrANTIES OF MErCHANTABILITy AND FITNESS.; record; able individually as replacement parts.
Digital solDering station
Model
96531
set up anD operating instructions
Diagrams within this manual may not be drawn proportionally.
Due to continuing improvements, actual product may differ slightly from the product described herein.
Distributed Exclusively by Harbor Freight Tools
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our website at: http://www.harborfreight.com
read this material before using this product.
Failure to do so can result in serious injury.
saVe this Manual.
Copyright
©
2007 by Harbor Freight Tools
®
. All rights reserved. No portion of this
manual or any artwork contained herein may be reproduced in any shape or form
without the express written consent of Harbor Freight Tools.
For technical questions or replacement parts, please call 1-800-444-3353.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Page 2 SKU 96531 For technical questions, please call 1-800-444-3353. contents iMportant saFetY inForMation ............................ 3 general saFetY rules ................................................. 3 Work area .................................................................................
Page 3 SKU 96531 For technical questions, please call 1-800-444-3353. saVe this Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram...
Page 4 SKU 96531 For technical questions, please call 1-800-444-3353. general saFetY rules Warning! read all instructions Failure to follow all instructions listed below may result in electric shock, fire, and/or serious injury. The term “power tool” in all of the warnings listed below refers to you...
